The solution-treated Mg-4Y-4Sm-0.5Zr alloy was extruded at temperatures from 325℃ to 500℃.Dynamic recrystallization(DRX) completely occurs when the alloy is extruded at 350℃and above.The grains of the extruded allo...The solution-treated Mg-4Y-4Sm-0.5Zr alloy was extruded at temperatures from 325℃ to 500℃.Dynamic recrystallization(DRX) completely occurs when the alloy is extruded at 350℃and above.The grains of the extruded alloy are obviously refined by the occurrence of DRX.The average grain size of the extruded alloy increases with increasing the extrusion temperature,leading to a slight decrease of the ultimate tensile strength(UTS) and the yield strength(YS) .On the contrary,the UTS and YS of the extruded and aged alloy increase with increasing the extrusion temperature.Values of UTS of 400 MPa,YS larger than 300 MPa and elongation(EL) of 7%are achieved after extrusion at 400℃ and ageing at 200℃ for 16 h.Both grain refinement and precipitation are efficient strengthening mechanisms for the Mg-4Y-4Sm-0.5Zr alloy.展开更多
A statistical mechanics method is proposed for calculation of potential ofmean force (PMF). In the case of solvophobic or solvophilic macroparticles immersed in solvent bathof soft sphere or Lennard-Jones particles, p...A statistical mechanics method is proposed for calculation of potential ofmean force (PMF). In the case of solvophobic or solvophilic macroparticles immersed in solvent bathof soft sphere or Lennard-Jones particles, prediction accuracy for the PMF and MF from the simplestimplementation of the proposed method, where hypernetted chain approximation is adopted forcorrelation of the macroparticle-macroparticle at infinitely dilute limit, is comparable to that ofa recent more sophisticated approach based on mixture Ornstein—Zernike integral equation / bridgefunction from fundamental measure functional. Adaptation of the present method for general complexQuids is discussed, and method for improving the accuracy is suggested. Differences and relativemerits of the present recipe compared with that based on potential distribution theory is discussed.展开更多
Because of the mixed grain and coarse grain structure, the long heat treatment cycle and large energy conservation in the heavy cylinder heat treatment process, the up ladder type and terraced type normalizing heat tr...Because of the mixed grain and coarse grain structure, the long heat treatment cycle and large energy conservation in the heavy cylinder heat treatment process, the up ladder type and terraced type normalizing heat treatment of heavy cylinder after rolling were put forward. The microstructure and mechanical properties of 2.25Cr1Mo0.25 V steel after the up ladder type normalizing, terraced type normalizing and isothermal type normalizing were studied. Experimental results show that： 1） For the grain refinement, the twice terraced type normalizing is better than the up ladder type and isothermal type normalizing, and the average grain size is 18 μm; 2） The yield strength, tensile strength and-30℃ charpy impact energy after twice terraced type normalizing are 681 MPa, 768 MPa and 181 J, respectively, and the mechanical properties are better than those of the up ladder type and isothermal type normalizing; 3） Compared with the isothermal type normalizing, the holding time of terraced type normalizing can be shortened by 30%, which greatly reduces the energy consumption.展开更多
The solidification microstructures and hardness of Mg-2%Zn (mass fraction) based alloys with addition of 0.4%Ce, 0.4%Gd, 0.4%Y or 0.4%Nd (mass fraction) were investigated, and the effects of the rare earth elements on...The solidification microstructures and hardness of Mg-2%Zn (mass fraction) based alloys with addition of 0.4%Ce, 0.4%Gd, 0.4%Y or 0.4%Nd (mass fraction) were investigated, and the effects of the rare earth elements on the microstructures and mechanical properties of these alloys extruded at 310℃ were also compared. The results indicate that the trace rare earth Ce, Gd, Y or Nd in the Mg-2%Zn alloy has obviously different grain refinement effects on its solidification microstructures, and the as-cast and hot-extruded alloy with 0.4%Ce has the smallest average grain size and the highest strength. However, the extruded alloys containing 0.4%Nd or 0.4%Y with the elongation of 26.6% and 30%, respectively, show higher plasticity in spite of lower strength as compared with the alloy containing 0.4%Ce.展开更多
基金Project(2009AA033501)supported by the National Hi-tech Research and Development Program of ChinaProject(2006BAE04B01-2)supported by the National Key Technology Research&Development Program of ChinaProject(06SR07104)supported by theInternational Cooperation Fund of Shanghai Science and Technology Committee,Shanghai/Rhone-Alpes Science and Technology
文摘The solution-treated Mg-4Y-4Sm-0.5Zr alloy was extruded at temperatures from 325℃ to 500℃.Dynamic recrystallization(DRX) completely occurs when the alloy is extruded at 350℃and above.The grains of the extruded alloy are obviously refined by the occurrence of DRX.The average grain size of the extruded alloy increases with increasing the extrusion temperature,leading to a slight decrease of the ultimate tensile strength(UTS) and the yield strength(YS) .On the contrary,the UTS and YS of the extruded and aged alloy increase with increasing the extrusion temperature.Values of UTS of 400 MPa,YS larger than 300 MPa and elongation(EL) of 7%are achieved after extrusion at 400℃ and ageing at 200℃ for 16 h.Both grain refinement and precipitation are efficient strengthening mechanisms for the Mg-4Y-4Sm-0.5Zr alloy.
文摘A statistical mechanics method is proposed for calculation of potential ofmean force (PMF). In the case of solvophobic or solvophilic macroparticles immersed in solvent bathof soft sphere or Lennard-Jones particles, prediction accuracy for the PMF and MF from the simplestimplementation of the proposed method, where hypernetted chain approximation is adopted forcorrelation of the macroparticle-macroparticle at infinitely dilute limit, is comparable to that ofa recent more sophisticated approach based on mixture Ornstein—Zernike integral equation / bridgefunction from fundamental measure functional. Adaptation of the present method for general complexQuids is discussed, and method for improving the accuracy is suggested. Differences and relativemerits of the present recipe compared with that based on potential distribution theory is discussed.
基金Project(51305388)supported by the National Natural Science Foundation of ChinaProject(BJ2014055)supported by the Youth Talent Projects of Colleges in Hebei Province,ChinaProject(2016M590211)supported by China Postdoctoral Science Foundation
文摘Because of the mixed grain and coarse grain structure, the long heat treatment cycle and large energy conservation in the heavy cylinder heat treatment process, the up ladder type and terraced type normalizing heat treatment of heavy cylinder after rolling were put forward. The microstructure and mechanical properties of 2.25Cr1Mo0.25 V steel after the up ladder type normalizing, terraced type normalizing and isothermal type normalizing were studied. Experimental results show that： 1） For the grain refinement, the twice terraced type normalizing is better than the up ladder type and isothermal type normalizing, and the average grain size is 18 μm; 2） The yield strength, tensile strength and-30℃ charpy impact energy after twice terraced type normalizing are 681 MPa, 768 MPa and 181 J, respectively, and the mechanical properties are better than those of the up ladder type and isothermal type normalizing; 3） Compared with the isothermal type normalizing, the holding time of terraced type normalizing can be shortened by 30%, which greatly reduces the energy consumption.
基金Projects(2007CB613701 2007CB613702) supported by the National Basic Research Program of China+2 种基金Project(NCET-08-0098) supported by the Program for New Century Excellent Talents in UniversityProject(50974037) supported by the National Natural Science Foundation of ChinaProject(90209002) supported by the Special Fund for Basic Scientific Research of Central Colleges in China
文摘The solidification microstructures and hardness of Mg-2%Zn (mass fraction) based alloys with addition of 0.4%Ce, 0.4%Gd, 0.4%Y or 0.4%Nd (mass fraction) were investigated, and the effects of the rare earth elements on the microstructures and mechanical properties of these alloys extruded at 310℃ were also compared. The results indicate that the trace rare earth Ce, Gd, Y or Nd in the Mg-2%Zn alloy has obviously different grain refinement effects on its solidification microstructures, and the as-cast and hot-extruded alloy with 0.4%Ce has the smallest average grain size and the highest strength. However, the extruded alloys containing 0.4%Nd or 0.4%Y with the elongation of 26.6% and 30%, respectively, show higher plasticity in spite of lower strength as compared with the alloy containing 0.4%Ce.
