In this study, the characteristics of geological structure at Qingshui coal mine were analyzed. And the hollow inclusion strain cell overcoring method was used to obtain the in situ stress. The effect of in situ stres...In this study, the characteristics of geological structure at Qingshui coal mine were analyzed. And the hollow inclusion strain cell overcoring method was used to obtain the in situ stress. The effect of in situ stress on the stability of soft rock roadway was analyzed. The results show that the maximum principal stress is in the horizontal direction with a northeast orientation and has a value of about 1.2–1.9 times larger than gravity; the right side of roadway roof and floor is easily subject to serious deformation and failure, and the in situ stress is found to be a major factor. This paper presents important information for developing countermeasures against the large deformation of the soft rock roadway at Qingshui coal mine.展开更多
Alaska geology and plate tectonics have not been well understood due to an active Yakutat plate, believed to be part of the remains of an ancient Kula plate, not being acknowledged to exist in Alaska. It is positioned...Alaska geology and plate tectonics have not been well understood due to an active Yakutat plate, believed to be part of the remains of an ancient Kula plate, not being acknowledged to exist in Alaska. It is positioned throughout most of southcentral Alaska beneath the North American plate and above the NNW subducting Pacific plate. The Kula？ plate and its eastern spreading ridge were partially ＂captured＂ by the North American plate in the Paleocene. Between 63 Ma and 32 Ma, large volumes of volcanics erupted from its subducted N-S striking spreading ridge through a slab window. The eruptions stopped at 32 Ma, likely due to the Pacific plate fiat-slab subducting from the south beneath this spreading ridge. At 28 Ma, magmatism started again to the east; indicating a major shift to the east of this ＂refusing to die＂ spreading ridge. The captured Yakutat plate has also been subducting since 63 Ma to the WSW. It started to change to WSW fiat-slab subduction at 32 Ma, which stopped all subduction magmatism in W and SW Alaska by 22 Ma. The Yakutat plate subduction has again increased with the impact/joining of the coastal Yakutat terrane from the ESE about 5 Ma, resulting in the Cook Inlet Quaternary volcanism of southcentral Alaska. During the 1964 Alaska earthquake, sudden movements along the southcentral Alaska thrust faults between the Yakutat plate and the Pacific plate occurred. Specifically, the movements consisted of the Pacific plate moving NNW under the buried Yakutat plate and of the coastal Yakutat terrane, which is considered part of the Yakutat plate, thrusting WSW onto the Pacific plate. These were the two main sources of energy release for the E part of this earthquake. Only limited movement between the Yakutat plate and the North American plate occurred during this 1964 earthquake event. Buried paleopeat age dates indicate the thrust boundary between the Yakutat plate and North American plate will move in about 230 years, resulting in a more ＂continental＂ type megathrust earthquake for southcentral Alaska. There are, therefore, at least two different types ofmegathrust earthquakes occurring in southcentral Alaska： the more oceanic 1964 type and the more continental type. In addition, large ＂active＂ WSW oriented strike-slip faults are recognized in the Yakutat plate, called slice faults, which represent another earthquake hazard for the region. These slice faults also indicate important oil/gas and mineral resource locations.展开更多
基金provided by the Beijing Natural Science Foundation(No.8142032)the National Natural Science Foundation of China(No.41040027)+2 种基金the State Key Program of National Natural Science of China(No.5113400)the Research Fund for the Doctoral Program of Higher Education(No.20130023110021)the Special Fund of Basic Research and Operating Expenses of State Key Laboratory of Geomechanics and Deep Underground Engineering,China University of Mining&Technology,Beijing
文摘In this study, the characteristics of geological structure at Qingshui coal mine were analyzed. And the hollow inclusion strain cell overcoring method was used to obtain the in situ stress. The effect of in situ stress on the stability of soft rock roadway was analyzed. The results show that the maximum principal stress is in the horizontal direction with a northeast orientation and has a value of about 1.2–1.9 times larger than gravity; the right side of roadway roof and floor is easily subject to serious deformation and failure, and the in situ stress is found to be a major factor. This paper presents important information for developing countermeasures against the large deformation of the soft rock roadway at Qingshui coal mine.
文摘Alaska geology and plate tectonics have not been well understood due to an active Yakutat plate, believed to be part of the remains of an ancient Kula plate, not being acknowledged to exist in Alaska. It is positioned throughout most of southcentral Alaska beneath the North American plate and above the NNW subducting Pacific plate. The Kula？ plate and its eastern spreading ridge were partially ＂captured＂ by the North American plate in the Paleocene. Between 63 Ma and 32 Ma, large volumes of volcanics erupted from its subducted N-S striking spreading ridge through a slab window. The eruptions stopped at 32 Ma, likely due to the Pacific plate fiat-slab subducting from the south beneath this spreading ridge. At 28 Ma, magmatism started again to the east; indicating a major shift to the east of this ＂refusing to die＂ spreading ridge. The captured Yakutat plate has also been subducting since 63 Ma to the WSW. It started to change to WSW fiat-slab subduction at 32 Ma, which stopped all subduction magmatism in W and SW Alaska by 22 Ma. The Yakutat plate subduction has again increased with the impact/joining of the coastal Yakutat terrane from the ESE about 5 Ma, resulting in the Cook Inlet Quaternary volcanism of southcentral Alaska. During the 1964 Alaska earthquake, sudden movements along the southcentral Alaska thrust faults between the Yakutat plate and the Pacific plate occurred. Specifically, the movements consisted of the Pacific plate moving NNW under the buried Yakutat plate and of the coastal Yakutat terrane, which is considered part of the Yakutat plate, thrusting WSW onto the Pacific plate. These were the two main sources of energy release for the E part of this earthquake. Only limited movement between the Yakutat plate and the North American plate occurred during this 1964 earthquake event. Buried paleopeat age dates indicate the thrust boundary between the Yakutat plate and North American plate will move in about 230 years, resulting in a more ＂continental＂ type megathrust earthquake for southcentral Alaska. There are, therefore, at least two different types ofmegathrust earthquakes occurring in southcentral Alaska： the more oceanic 1964 type and the more continental type. In addition, large ＂active＂ WSW oriented strike-slip faults are recognized in the Yakutat plate, called slice faults, which represent another earthquake hazard for the region. These slice faults also indicate important oil/gas and mineral resource locations.
