Since the impoundment of the Three Gorges Reservoir(TGR), the riparian zone has been subjected to numerous environmental changes. This study was conducted to recognize the distribution of grass roots and its impacts o...Since the impoundment of the Three Gorges Reservoir(TGR), the riparian zone has been subjected to numerous environmental changes. This study was conducted to recognize the distribution of grass roots and its impacts on soil nutrients in the water level fluctuation zone of TGR. Roots of four predominant herbaceous plants in the study area, specifically, Cynodon dactylon, Hemarthria altissima, Hemarthria compressa, and Paspalum paspaloides, and their corresponding relation with soil nutrient contents were investigated. Root surface area density was determined with Win RHIZO, and the relationships of root distribution with soil depths and soil nutrient contents were studied. The results indicates that most roots are distributed in the top soil layer of 0-10 cm. Estimated root surface area density for the selected grass species ranges from 0.16 to 13.44 cm^2/cm^3, and decreases exponentially with an increase in soil depth. Soil organic matter and total nitrogen contents are significantly lower on bare control area than the corresponding values on the grasslands. Total nutrient contents on grasslands of C. dactylon and H. compressa are higher than those of other grass areas. Root length density and root surface area density are significantly correlated with soil organic matter and total nitrogen content for the four grasslands. The present results suggests that plant roots have significant effects on the distribution of soil nutrients in soil profiles in the riparian zone along the TGR. Nevertheless, additional investigations are needed to reveal the specific interactions between plant roots distribution, soil nutrients and water level fluctuations.展开更多
A new gas-solid separator dedicated to heavy-oil fast pyrolysis process incorporating inertial and centrifugal separation was designed. Gas and typical fluid catalytic cracking （FCC） catalyst particles （with a dens...A new gas-solid separator dedicated to heavy-oil fast pyrolysis process incorporating inertial and centrifugal separation was designed. Gas and typical fluid catalytic cracking （FCC） catalyst particles （with a density of 1500 kg/m3, and a mean diameter of 45.81 p.m） were used in the study. The inlet gas velocity was kept constant at 13.36 m/s, while the solid loading at the inlet ranged from 0 to 700 g/m3. When the exhaust pipe opening was provided with two narrow-width slots near the inlet without baffles, the solid collection efficiency increased with an increasing solid loading at the inlet and was close to 95% along with a decreasing pressure drop. After increasing the secondary separation structure, the separation efficiency greatly improved. By adjusting the diameter of the secondary exhaust pipe, the separation efficiency and pressure drop could be balanced. Under the experimental conditions, when the diameter of the second exhaust pipe was equal to d=100 mm, the pressure drop was lower than 1400 Pa while the separation efficiency could exceed 99.50%; and when the diameter was equal to d=120 mm, the pressure drop was less than 700 Pa, with the separation efficiency reaching over 99.00%.展开更多
AIM:To evaluate the surgical outcomes following radical antegrade modular pancreatosplenectomy (RAMPS) for pancreatic cancer. METHODS:Twenty-four patients underwent RAMPS with curative intent between January 2005 and ...AIM:To evaluate the surgical outcomes following radical antegrade modular pancreatosplenectomy (RAMPS) for pancreatic cancer. METHODS:Twenty-four patients underwent RAMPS with curative intent between January 2005 and June 2009 at the National Cancer Center, South Korea. Clinicopathologic data, including age, sex, operative findings, pathologic results, adjuvant therapy, postop-erative clinical course and follow-up data were retro-spectively collected and analyzed for this study. RESULTS:Twenty-one patients (87.5%) underwent distal pancreatectomy and 3 patients (12.5%) underwent total pancreatectomy using RAMPS. Nine patients (37.5%) underwent combined vessel resection, including 8 superior mesenteric-portal vein resections and 1 celiac axis resection. Two patients (8.3%) underwent combined resection of other organs, including the colon, stomach or duodenum. Negative tangential margins were achieved in 22 patients (91.7%). The mean tumor diameter for all patients was 4.09 ± 2.15 cm. The 2 patients with positive margins had a mean diameter of 7.25 cm. The mean number of retrieved lymph nodes was 20.92 ± 11.24 and the node positivity rate was 70.8%. The median survival of the 24 patients was 18.23 ± 6.02 mo. Patients with negative margins had a median survival of 21.80 ± 5.30 mo and those with positive margins had a median survival of 6.47 mo (P = 0.021). Nine patients (37.5%) had postoperative complications, but there were no postoperative mortalities. Pancreatic fistula occurred in 4 patients (16.7%):2 patients had a grade A fistula and 2 had a grade B fistula. On univariate analysis, histologic grade, positive tangential margin, pancreatic fistula and adjuvant therapy were significant prognostic factors for survival. CONCLUSION:RAMPS is a feasible procedure for achieving negative tangential margins in patients with carcinoma of the body and tail of the pancreas.展开更多
Urbanization is a process that is undergoing all over the world, which will speed up in the forthcoming years, especially in China as the boom of economy. On average, urbanization level is not only depended on the spe...Urbanization is a process that is undergoing all over the world, which will speed up in the forthcoming years, especially in China as the boom of economy. On average, urbanization level is not only depended on the speed, but theefficiency, particularly efficiency of using land resource which affects urbanization directly. This paper provided status quo of land resource utilization efficiency, indictors, methods and factors, and illustrated the reference of well land utilization, aiming at fostering urbanization in China.展开更多
A discontinuity of magnetic circuits according to the end effect is generated in the permanent magnet linear synchronous motor （PMLSM）. Due to the unbalanced back electro-motive force （EMF） and impedance produced,...A discontinuity of magnetic circuits according to the end effect is generated in the permanent magnet linear synchronous motor （PMLSM）. Due to the unbalanced back electro-motive force （EMF） and impedance produced, unbalanced current is generated. The cireulatin8 current, which is caused by a decrease in the thrust, is generated by the unbalanced current. The optimal design of auxiliary-teeth at the end of the mover was carried out to solve the unbalance of phase by using design of experiment （DOE）, and compared with the basic model through finite element analysis （FEA）. As a result, the auxiliary-teeth model compensates for the decrease of thrust caused by the unbalanced phase. Also, this model is proven to reduce the detent force by the vibration and noise of the PMLSM and copper loss caused by the circulating current.展开更多
Pressure-swirl atomizers are often employed to generate a water-mist spray,typically employed in fire suppression.In the present study,an experimental characterization of dispersion(velocity and cone angle)and atomiza...Pressure-swirl atomizers are often employed to generate a water-mist spray,typically employed in fire suppression.In the present study,an experimental characterization of dispersion(velocity and cone angle)and atomization(drop-size axial evolution)was carried out following a previously developed methodology,with specific reference to the initial region of the spray.Laser-based techniques were used to quantitatively evaluate the considered phenomena:velocity field was reconstructed through a Particle Image Velocimetry analysis;drop-size distribution was measured by a Malvern Spraytec device,highlighting secondary atomization and subsequent coalescence along the spray axis.Moreover,a comprehensive set of relations was validated as predictive of the involved parameters,following an inviscid-fluid approach.The proposed model pertains to early studies on pressure-swirl atomizers and primarily yields to determine both initial velocity and cone angle.The spray thickness is also predicted and a classic correlation for Sauter Mean Diameter is shown to provide good agreement with experimental results.The analysis was carried out at the operative pressure of 80 bar;two injectors were employed featuring different orifice diameters and flow numbers,as a sort of parametric approach to this spray typology.展开更多
Based on the comparison of existing power flow controllers(PFC)in meshed HVDC grids,the full-bridge modular multilevel converter based PFC(MMPFC)is proposed.At first,the general branch current calculation method of me...Based on the comparison of existing power flow controllers(PFC)in meshed HVDC grids,the full-bridge modular multilevel converter based PFC(MMPFC)is proposed.At first,the general branch current calculation method of meshed HVDC grids with the PFC is presented,and then,the issue of over-voltage on the thyristor based PFC is described and analyzed.Through the analysis of different operating modes of the full-bridge sub-module,the mechanism of over-voltage ride through of the MMPFC is indicated.The control strategy of the MMPFC,which is used to control branch current and keep capacitor voltage balancing,is elaborated.Finally,the performance on current regulation,bidirectional operation and over-voltage ride through is simulated and verified in a built model with PSCAD/EMTDC.展开更多
By measuring the sand-dust flux,vertical deposition,and the wind velocity throughout 19 sandstorms in the Minqin region,we quantitatively analyzed the horizontal distribution and vertical variation in sandstorm charac...By measuring the sand-dust flux,vertical deposition,and the wind velocity throughout 19 sandstorms in the Minqin region,we quantitatively analyzed the horizontal distribution and vertical variation in sandstorm characteristics under different land cover conditions.The effect of different land cover on mitigating sandstorms was also investigated.The results indicated that,in the surface layer ranging from 0-50 m,the intensity of sand-dust horizontal flux and concentration of sand-dust decreased with the increase of the height in the desert and the edge of oasis,whereas the two physical quantities increased slightly with the increase of the height in the oasis.The two physical quantities obey power function well under all three cover conditions.Moreover,in the desert and at the edge of oasis,the sand-dust vertical deposition decreased with the increase of the height.But a partial unimodal distribution at the oasis site and the maximum deposition occurred at the height of 9 m,which corresponds to the middle height of farmland protection forest.The annual flux that passed through a section of 1 m in width and 50 m in height was 9169 kg in the desert,5318 kg at the edge of oasis,and 2345 kg in the oasis.And the annual fluxes at the edge of oasis and in the oasis are 42% and 74% less,respectively,than that in the desert.This implies that the wind break forest significantly reduced the intensity of sandstorms.展开更多
Single-walled carbon nanotubes （SWCNTs） with specific diameters are required for various applications particularly in electronics and photonics, since the diameter is an essential characteristic determining their el...Single-walled carbon nanotubes （SWCNTs） with specific diameters are required for various applications particularly in electronics and photonics, since the diameter is an essential characteristic determining their electronic and optical properties. In this work, the selective growth of SWCNTs with a certain mean diameter is achieved by the addition of appropriate amounts of CO2 mixed with the carbon source （CO） into the aerosol （floating catalyst） chemical vapor deposition reactor. The noticeable shift of the peaks in the absorption spectra reveals that the mean diameters of the as-deposited SWCNTs are efficiently altered from 1.2 to 1.9 nm with increasing CO2 concentration. It is believed that CO2 acts as an etching agent and can selectively etch small diameter tubes due to their highly curved carbon surfaces. Polymer-free as-deposited SWCNT films with the desired diameters are used as saturable absorbers after stamping onto a highly reflecting Ag-mirror using a simple dry-transfer technique. Sub-picosecond mode-locked fiber laser operations at -1.56μm and -2 μm are demonstrated, showing improvements in the performance after the optimization of the SWCNT properties.展开更多
This paper presents the behavior analysis of modular multilevel converter under DC pole-to-pole short-circuit fault, which is an important issue in fault management, electrical system design and MMC based power system...This paper presents the behavior analysis of modular multilevel converter under DC pole-to-pole short-circuit fault, which is an important issue in fault management, electrical system design and MMC based power system protection and control. Firstly, the transient behavior is analyzed and the conduction overlap- ping angle γ, is defined. Secondly, seven possible short-circuit current paths induced by different γ values are identified, and the corresponding engineering short-circuit current calculation methods for both AC and DC sides are proposed. And then, the influences of impedance distribution factor κ and equivalent short-circuit resistance Rsc on short-circuit currents are elaborated the proposed analysis methods. Finally, case study is used to verify the effectiveness of展开更多
A simple and efficient method for the synthesis of ultrasmall Pd nanoclusters(NCs) has been developed. The as-obtained Pd NCs displayed uniform size with an average diameter of 1.8±0.2 nm. The ultrasmall Pd NCs a...A simple and efficient method for the synthesis of ultrasmall Pd nanoclusters(NCs) has been developed. The as-obtained Pd NCs displayed uniform size with an average diameter of 1.8±0.2 nm. The ultrasmall Pd NCs and carbon nanotubes(CNTs)-supported Pd NCs also showed outstanding catalytic activity for nitrobenzene reduction and Suzuki coupling reactions. Notably, the reactions were conducted under mild conditions with high yield and selectivity.展开更多
基金the National Natural Science Foundation of China (Grant Nos.41601296,41571278 and 41771321)China Postdoctoral Science Foundation (Grant No.2016M592720)+1 种基金Applied Basic Research Foundation of Yunnan Province (Grant No.2016FD011)Sichuan Science and Technology Program (2018SZ0132)
文摘Since the impoundment of the Three Gorges Reservoir(TGR), the riparian zone has been subjected to numerous environmental changes. This study was conducted to recognize the distribution of grass roots and its impacts on soil nutrients in the water level fluctuation zone of TGR. Roots of four predominant herbaceous plants in the study area, specifically, Cynodon dactylon, Hemarthria altissima, Hemarthria compressa, and Paspalum paspaloides, and their corresponding relation with soil nutrient contents were investigated. Root surface area density was determined with Win RHIZO, and the relationships of root distribution with soil depths and soil nutrient contents were studied. The results indicates that most roots are distributed in the top soil layer of 0-10 cm. Estimated root surface area density for the selected grass species ranges from 0.16 to 13.44 cm^2/cm^3, and decreases exponentially with an increase in soil depth. Soil organic matter and total nitrogen contents are significantly lower on bare control area than the corresponding values on the grasslands. Total nutrient contents on grasslands of C. dactylon and H. compressa are higher than those of other grass areas. Root length density and root surface area density are significantly correlated with soil organic matter and total nitrogen content for the four grasslands. The present results suggests that plant roots have significant effects on the distribution of soil nutrients in soil profiles in the riparian zone along the TGR. Nevertheless, additional investigations are needed to reveal the specific interactions between plant roots distribution, soil nutrients and water level fluctuations.
文摘A new gas-solid separator dedicated to heavy-oil fast pyrolysis process incorporating inertial and centrifugal separation was designed. Gas and typical fluid catalytic cracking （FCC） catalyst particles （with a density of 1500 kg/m3, and a mean diameter of 45.81 p.m） were used in the study. The inlet gas velocity was kept constant at 13.36 m/s, while the solid loading at the inlet ranged from 0 to 700 g/m3. When the exhaust pipe opening was provided with two narrow-width slots near the inlet without baffles, the solid collection efficiency increased with an increasing solid loading at the inlet and was close to 95% along with a decreasing pressure drop. After increasing the secondary separation structure, the separation efficiency greatly improved. By adjusting the diameter of the secondary exhaust pipe, the separation efficiency and pressure drop could be balanced. Under the experimental conditions, when the diameter of the second exhaust pipe was equal to d=100 mm, the pressure drop was lower than 1400 Pa while the separation efficiency could exceed 99.50%; and when the diameter was equal to d=120 mm, the pressure drop was less than 700 Pa, with the separation efficiency reaching over 99.00%.
文摘AIM:To evaluate the surgical outcomes following radical antegrade modular pancreatosplenectomy (RAMPS) for pancreatic cancer. METHODS:Twenty-four patients underwent RAMPS with curative intent between January 2005 and June 2009 at the National Cancer Center, South Korea. Clinicopathologic data, including age, sex, operative findings, pathologic results, adjuvant therapy, postop-erative clinical course and follow-up data were retro-spectively collected and analyzed for this study. RESULTS:Twenty-one patients (87.5%) underwent distal pancreatectomy and 3 patients (12.5%) underwent total pancreatectomy using RAMPS. Nine patients (37.5%) underwent combined vessel resection, including 8 superior mesenteric-portal vein resections and 1 celiac axis resection. Two patients (8.3%) underwent combined resection of other organs, including the colon, stomach or duodenum. Negative tangential margins were achieved in 22 patients (91.7%). The mean tumor diameter for all patients was 4.09 ± 2.15 cm. The 2 patients with positive margins had a mean diameter of 7.25 cm. The mean number of retrieved lymph nodes was 20.92 ± 11.24 and the node positivity rate was 70.8%. The median survival of the 24 patients was 18.23 ± 6.02 mo. Patients with negative margins had a median survival of 21.80 ± 5.30 mo and those with positive margins had a median survival of 6.47 mo (P = 0.021). Nine patients (37.5%) had postoperative complications, but there were no postoperative mortalities. Pancreatic fistula occurred in 4 patients (16.7%):2 patients had a grade A fistula and 2 had a grade B fistula. On univariate analysis, histologic grade, positive tangential margin, pancreatic fistula and adjuvant therapy were significant prognostic factors for survival. CONCLUSION:RAMPS is a feasible procedure for achieving negative tangential margins in patients with carcinoma of the body and tail of the pancreas.
基金Supported the Major Research Plan of the National Natural Science Foundation of China(Grant No.91325302,91425303)
文摘Urbanization is a process that is undergoing all over the world, which will speed up in the forthcoming years, especially in China as the boom of economy. On average, urbanization level is not only depended on the speed, but theefficiency, particularly efficiency of using land resource which affects urbanization directly. This paper provided status quo of land resource utilization efficiency, indictors, methods and factors, and illustrated the reference of well land utilization, aiming at fostering urbanization in China.
基金supported by the Second Stage of Brain Korea 21 Projects and Changwon National University in 2009-2010
文摘A discontinuity of magnetic circuits according to the end effect is generated in the permanent magnet linear synchronous motor （PMLSM）. Due to the unbalanced back electro-motive force （EMF） and impedance produced, unbalanced current is generated. The cireulatin8 current, which is caused by a decrease in the thrust, is generated by the unbalanced current. The optimal design of auxiliary-teeth at the end of the mover was carried out to solve the unbalance of phase by using design of experiment （DOE）, and compared with the basic model through finite element analysis （FEA）. As a result, the auxiliary-teeth model compensates for the decrease of thrust caused by the unbalanced phase. Also, this model is proven to reduce the detent force by the vibration and noise of the PMLSM and copper loss caused by the circulating current.
基金supported by Bettati Antincendio S.r.l. and Regione Emilia-Romagna
文摘Pressure-swirl atomizers are often employed to generate a water-mist spray,typically employed in fire suppression.In the present study,an experimental characterization of dispersion(velocity and cone angle)and atomization(drop-size axial evolution)was carried out following a previously developed methodology,with specific reference to the initial region of the spray.Laser-based techniques were used to quantitatively evaluate the considered phenomena:velocity field was reconstructed through a Particle Image Velocimetry analysis;drop-size distribution was measured by a Malvern Spraytec device,highlighting secondary atomization and subsequent coalescence along the spray axis.Moreover,a comprehensive set of relations was validated as predictive of the involved parameters,following an inviscid-fluid approach.The proposed model pertains to early studies on pressure-swirl atomizers and primarily yields to determine both initial velocity and cone angle.The spray thickness is also predicted and a classic correlation for Sauter Mean Diameter is shown to provide good agreement with experimental results.The analysis was carried out at the operative pressure of 80 bar;two injectors were employed featuring different orifice diameters and flow numbers,as a sort of parametric approach to this spray typology.
基金supported by the National High Technology Research and Development Program of China("863"Program)(Grant No.2012AA050205)
文摘Based on the comparison of existing power flow controllers(PFC)in meshed HVDC grids,the full-bridge modular multilevel converter based PFC(MMPFC)is proposed.At first,the general branch current calculation method of meshed HVDC grids with the PFC is presented,and then,the issue of over-voltage on the thyristor based PFC is described and analyzed.Through the analysis of different operating modes of the full-bridge sub-module,the mechanism of over-voltage ride through of the MMPFC is indicated.The control strategy of the MMPFC,which is used to control branch current and keep capacitor voltage balancing,is elaborated.Finally,the performance on current regulation,bidirectional operation and over-voltage ride through is simulated and verified in a built model with PSCAD/EMTDC.
基金supported by National Natural Science Foundation of China (Grant Nos. 30872069, 30960321)National Commonweal Special Research of Forestry of China (Grant No. 200804031)
文摘By measuring the sand-dust flux,vertical deposition,and the wind velocity throughout 19 sandstorms in the Minqin region,we quantitatively analyzed the horizontal distribution and vertical variation in sandstorm characteristics under different land cover conditions.The effect of different land cover on mitigating sandstorms was also investigated.The results indicated that,in the surface layer ranging from 0-50 m,the intensity of sand-dust horizontal flux and concentration of sand-dust decreased with the increase of the height in the desert and the edge of oasis,whereas the two physical quantities increased slightly with the increase of the height in the oasis.The two physical quantities obey power function well under all three cover conditions.Moreover,in the desert and at the edge of oasis,the sand-dust vertical deposition decreased with the increase of the height.But a partial unimodal distribution at the oasis site and the maximum deposition occurred at the height of 9 m,which corresponds to the middle height of farmland protection forest.The annual flux that passed through a section of 1 m in width and 50 m in height was 9169 kg in the desert,5318 kg at the edge of oasis,and 2345 kg in the oasis.And the annual fluxes at the edge of oasis and in the oasis are 42% and 74% less,respectively,than that in the desert.This implies that the wind break forest significantly reduced the intensity of sandstorms.
文摘Single-walled carbon nanotubes （SWCNTs） with specific diameters are required for various applications particularly in electronics and photonics, since the diameter is an essential characteristic determining their electronic and optical properties. In this work, the selective growth of SWCNTs with a certain mean diameter is achieved by the addition of appropriate amounts of CO2 mixed with the carbon source （CO） into the aerosol （floating catalyst） chemical vapor deposition reactor. The noticeable shift of the peaks in the absorption spectra reveals that the mean diameters of the as-deposited SWCNTs are efficiently altered from 1.2 to 1.9 nm with increasing CO2 concentration. It is believed that CO2 acts as an etching agent and can selectively etch small diameter tubes due to their highly curved carbon surfaces. Polymer-free as-deposited SWCNT films with the desired diameters are used as saturable absorbers after stamping onto a highly reflecting Ag-mirror using a simple dry-transfer technique. Sub-picosecond mode-locked fiber laser operations at -1.56μm and -2 μm are demonstrated, showing improvements in the performance after the optimization of the SWCNT properties.
文摘This paper presents the behavior analysis of modular multilevel converter under DC pole-to-pole short-circuit fault, which is an important issue in fault management, electrical system design and MMC based power system protection and control. Firstly, the transient behavior is analyzed and the conduction overlap- ping angle γ, is defined. Secondly, seven possible short-circuit current paths induced by different γ values are identified, and the corresponding engineering short-circuit current calculation methods for both AC and DC sides are proposed. And then, the influences of impedance distribution factor κ and equivalent short-circuit resistance Rsc on short-circuit currents are elaborated the proposed analysis methods. Finally, case study is used to verify the effectiveness of
基金supported by the National Natural Science Foundation of China(20871112,21072001,21201001,21372006)the Chang Jiang Scholars Program+3 种基金the Scientific Research Foundation for Returning Overseas Chinese ScholarsMinistry of Education and Ministry of Human Resources and Social Security,Anhui Province International Scientific and Technological Cooperation ProjectAnhui Provincial Natural Science Foundation(1208085QB25)the 211 Project of Anhui University
文摘A simple and efficient method for the synthesis of ultrasmall Pd nanoclusters(NCs) has been developed. The as-obtained Pd NCs displayed uniform size with an average diameter of 1.8±0.2 nm. The ultrasmall Pd NCs and carbon nanotubes(CNTs)-supported Pd NCs also showed outstanding catalytic activity for nitrobenzene reduction and Suzuki coupling reactions. Notably, the reactions were conducted under mild conditions with high yield and selectivity.
