[Objective] There are continuous rainy days in Western Sichuan Plain in autumn. In order to avoid the impact of wet injury in sowing period, new varieties of Brassica napus L. with low erucidic acid and glucosinolate ...[Objective] There are continuous rainy days in Western Sichuan Plain in autumn. In order to avoid the impact of wet injury in sowing period, new varieties of Brassica napus L. with low erucidic acid and glucosinolate content which are suitable for no-tillage late direct-sowing in Western Sichuan Plain were screened in this study. [Method] Ten major varieties of Brassica napus L. were screened by randomized block design and triplicated plot test with no-tillage late direct-sowing and straw mulching for comparative experiment. [Result] ‘Chuanyou 58＇, ‘Huayouza 10＇and ‘Ningza 11＇ have high yield（per unit area yield above 3 000 kg/hm2）, excellent comprehensive characters, short growth period, high resistance and high quality;‘Huayouza 13＇ and ‘Zheshuang 3＇ have high yield potential（per unit area yield above 2 775 kg/hm2）, high resistance, high quality and moderate growth period; other varieties have extremely significant yield reduction, poor comprehensive characters and low resistance compared with control. [Conclusion] Excellent varieties of Brassica napus L. in the middle and lower reaches of Yangtze River such as ‘Huayouza10＇, ‘Ningza 11＇, ‘Huayouza 13＇ and ‘Zheshuang 3＇ can be successfully introduced and applied for large-area cultivation in Western Sichuan Plain.展开更多
With the use of this novel average model for Single Stage Flyback PFC+Flyback DC/DC converter, voltage control mode, peak current control mode and average current control mode can be simulated easily by changing the m...With the use of this novel average model for Single Stage Flyback PFC+Flyback DC/DC converter, voltage control mode, peak current control mode and average current control mode can be simulated easily by changing the model's parameters. It can be used to do various analysis not only for small signal and static behavior but also for large signal and dynamic behavior of the converter. By using this average model the simulation speed can be improved by 2 orders of magnitude above that obtained by using the conventional switched model. It can be applied to optimize the trade\|off between high power factor, voltage stress, current stress and good output performance while designing this kind of single stage PFC converter. A 60W single stage power factor corrector was built to verify the proposed model. The modeling principle can be applied to other Single Stage PFC topologies.展开更多
A novel continuum robot for colonoscopy is presented.The aim is to develop a robot for colonoscopywhich can provide the same functions as conventional colonoscope,but much less pain and discomfort forpatient.In contra...A novel continuum robot for colonoscopy is presented.The aim is to develop a robot for colonoscopywhich can provide the same functions as conventional colonoscope,but much less pain and discomfort forpatient.In contrast to traditional rigid-link robot,the robot features a continuous backbone with nojoints.The continuum robot is 300 mm in total length and 12 mm in diameter that is less than the averagediameter of human colon(20 mm).The robot has a total of 4 DOF(degrees of freedom)and is actuatedremotely by 6 hybrid step motors through super-elastic NiTi wires.Its shape can be changed with highdexterity,therefore ensuring its adaptability to the tortuous shape of human colon.The mechanical struc-ture,kinematics and DSP-based control system are discussed; prototype experiments are carried out tovalidate the kinematics model and to show the motion performances.展开更多
In order to calculate the air temperature of the near surface layer in urban environment,the surface layer air was divided into several sections in the vertical direction,and some energy balance equations were develop...In order to calculate the air temperature of the near surface layer in urban environment,the surface layer air was divided into several sections in the vertical direction,and some energy balance equations were developed for each air layer,in which the heat exchange due to vertical turbulence and horizontal air flow was taken into account.Then,the vertical temperature distribution of the surface layer air was obtained through the coupled calculation using the energy balance equations of underlying surfaces and building walls.Moreover,the measured air temperatures in a small area(with a horizontal scale of less than 500 m) and a large area(with a horizontal scale of more than 1 000 m) in Guangzhou in summer were used to validate the proposed model.The calculated results accord well with the measured ones,with a maximum relative error of 4.18%.It is thus concluded that the proposed model is a high-accuracy method to theoretically analyze the urban heat island and the thermal environment.展开更多
In order to control the maximum tangential velocity V?m(m/s)of the turbulent rotational air flow and the collection efficiencyηc(%)using the fly ash of the mean diameter X R50=5.57?m,two secondary jet nozzles were in...In order to control the maximum tangential velocity V?m(m/s)of the turbulent rotational air flow and the collection efficiencyηc(%)using the fly ash of the mean diameter X R50=5.57?m,two secondary jet nozzles were installed to the body of the axial flow cyclone dust collector with the body diameter D1=99mm.Then in order to estimate V?m(m/s),the conservation theory of the angular momentum flux with Ogawa combined vortex model was applied.The comparisons of the estimated results of V?m(m/s)with the measured results by the cylindrical Pitot-tube were shown in good agreement.And also the estimated collection efficienciesηcth(%)basing upon the cut-size Xc(?m)which was calculated by using the estimated V?m(m/s)and also the particle size distribution R(Xp)were shown a little higher values than the experimental results due to the re-entrainment of the collected dust.The best method for adjustment ofηc(%)related to the contribution of the secondary jet flow is principally to apply the centrifugal effect?c(1).Above stated results are described in detail.展开更多
基金Supported by National 863 Program of China(2011AA10A104)Special Fund for the Construction of Modern Agricultural Technology System(CARS-13)+4 种基金National Scienceand Technology Support Program of China(2010BAD01B08,2011BAD35B04)Breeding Research Project of Sichuan Province(2011NZ0098-5)Financial Genetic Engineering Program of Sichuan Province(2011JYGC04013)Special Fund for Agriculture Innovation Team Building of Sichuan ProvinceOutstanding Youth Academic and Technical Leader Training Program of Sichuan Province(2010JQ0054)~~
文摘[Objective] There are continuous rainy days in Western Sichuan Plain in autumn. In order to avoid the impact of wet injury in sowing period, new varieties of Brassica napus L. with low erucidic acid and glucosinolate content which are suitable for no-tillage late direct-sowing in Western Sichuan Plain were screened in this study. [Method] Ten major varieties of Brassica napus L. were screened by randomized block design and triplicated plot test with no-tillage late direct-sowing and straw mulching for comparative experiment. [Result] ‘Chuanyou 58＇, ‘Huayouza 10＇and ‘Ningza 11＇ have high yield（per unit area yield above 3 000 kg/hm2）, excellent comprehensive characters, short growth period, high resistance and high quality;‘Huayouza 13＇ and ‘Zheshuang 3＇ have high yield potential（per unit area yield above 2 775 kg/hm2）, high resistance, high quality and moderate growth period; other varieties have extremely significant yield reduction, poor comprehensive characters and low resistance compared with control. [Conclusion] Excellent varieties of Brassica napus L. in the middle and lower reaches of Yangtze River such as ‘Huayouza10＇, ‘Ningza 11＇, ‘Huayouza 13＇ and ‘Zheshuang 3＇ can be successfully introduced and applied for large-area cultivation in Western Sichuan Plain.
文摘With the use of this novel average model for Single Stage Flyback PFC+Flyback DC/DC converter, voltage control mode, peak current control mode and average current control mode can be simulated easily by changing the model's parameters. It can be used to do various analysis not only for small signal and static behavior but also for large signal and dynamic behavior of the converter. By using this average model the simulation speed can be improved by 2 orders of magnitude above that obtained by using the conventional switched model. It can be applied to optimize the trade\|off between high power factor, voltage stress, current stress and good output performance while designing this kind of single stage PFC converter. A 60W single stage power factor corrector was built to verify the proposed model. The modeling principle can be applied to other Single Stage PFC topologies.
基金Supported by the High Technology Research Development Programme of China (No. 2007AA042105)the Program for Changjiang Scholars and Innovative Research Team in University (IRT0423)
文摘A novel continuum robot for colonoscopy is presented.The aim is to develop a robot for colonoscopywhich can provide the same functions as conventional colonoscope,but much less pain and discomfort forpatient.In contrast to traditional rigid-link robot,the robot features a continuous backbone with nojoints.The continuum robot is 300 mm in total length and 12 mm in diameter that is less than the averagediameter of human colon(20 mm).The robot has a total of 4 DOF(degrees of freedom)and is actuatedremotely by 6 hybrid step motors through super-elastic NiTi wires.Its shape can be changed with highdexterity,therefore ensuring its adaptability to the tortuous shape of human colon.The mechanical struc-ture,kinematics and DSP-based control system are discussed; prototype experiments are carried out tovalidate the kinematics model and to show the motion performances.
基金Project(50808083) supported by the National Natural Science Foundation of China
文摘In order to calculate the air temperature of the near surface layer in urban environment,the surface layer air was divided into several sections in the vertical direction,and some energy balance equations were developed for each air layer,in which the heat exchange due to vertical turbulence and horizontal air flow was taken into account.Then,the vertical temperature distribution of the surface layer air was obtained through the coupled calculation using the energy balance equations of underlying surfaces and building walls.Moreover,the measured air temperatures in a small area(with a horizontal scale of less than 500 m) and a large area(with a horizontal scale of more than 1 000 m) in Guangzhou in summer were used to validate the proposed model.The calculated results accord well with the measured ones,with a maximum relative error of 4.18%.It is thus concluded that the proposed model is a high-accuracy method to theoretically analyze the urban heat island and the thermal environment.
文摘In order to control the maximum tangential velocity V?m(m/s)of the turbulent rotational air flow and the collection efficiencyηc(%)using the fly ash of the mean diameter X R50=5.57?m,two secondary jet nozzles were installed to the body of the axial flow cyclone dust collector with the body diameter D1=99mm.Then in order to estimate V?m(m/s),the conservation theory of the angular momentum flux with Ogawa combined vortex model was applied.The comparisons of the estimated results of V?m(m/s)with the measured results by the cylindrical Pitot-tube were shown in good agreement.And also the estimated collection efficienciesηcth(%)basing upon the cut-size Xc(?m)which was calculated by using the estimated V?m(m/s)and also the particle size distribution R(Xp)were shown a little higher values than the experimental results due to the re-entrainment of the collected dust.The best method for adjustment ofηc(%)related to the contribution of the secondary jet flow is principally to apply the centrifugal effect?c(1).Above stated results are described in detail.
