In this paper, a model of translation gateway is proposed. The communications between IPv4 network and IPv6 network are realized by using the Microsoft intermediate driver technology in environment of Windows 2000.
A moving-mass control method is introduced to stratospheric airship for its special working condition of low atmospheric density and low speed.The dynamic equation of airship is derived by using the Newton-Euler metho...A moving-mass control method is introduced to stratospheric airship for its special working condition of low atmospheric density and low speed.The dynamic equation of airship is derived by using the Newton-Euler method and the mechanism of attitude control by moving masses is studied.Then the passive gliding of airship by the moving masses is given based on the theory of glider,and attitude control capability between moving mass and elevator is compared at different airspeed.Analysis results show that the motion of masses changes the gravity center of the airship system,which makes the inertia tensor and the gravity moment vary.Meanwhile,the aerodynamic angles are generated,which results in the change of aerodynamic moment.Control efficiency of moving masses is independent of airspeed.Thus the moving-mass control has the advantage over the aerodynamic surfaces at low airspeed.展开更多
This paper presents the idea of constructing reconfigurable limbs by integrating metamorphic linkages as subchains.The planar five-bar metamorphic linkages that have three phases resulting from locking of motors are c...This paper presents the idea of constructing reconfigurable limbs by integrating metamorphic linkages as subchains.The planar five-bar metamorphic linkages that have three phases resulting from locking of motors are considered.Under the assumption that the constraint exerted by the reconfigurable limb can switch between no constraint,a constraint force,and a constraint couple,the output motions of the metamorphic linkage in its two planar four-bar linkage phases are identified.By adding an appropriate joint to planar four-bar linkages with translational output,four planar five-bar linkages that can be employed in the construction of reconfigurable limbs are enumerated.Serial chains that can provide a constraint couple and a constraint force are synthesized based on screw theory.Reconfigurable limbs that have three configurations associated with the three distinct phases of the metamorphic linkages are assembled with planar five-bar metamorphic linkages and serial chains with four degrees of freedom.A class of reconfigurable parallel mechanisms are constructed by connecting a moving platform and a base with three identical reconfigurable limbs.The degrees of freedom of the reconfigurable parallel mechanism in different configurations with the metamorphic linkages in different phases are given.Finally,the actuation scheme for this kind of mechanisms is addressed.展开更多
基金Supported by the Natural Science Foundation of Henan Province(0511011400) Supported by the Natural Science Foundation of Education Department of Henan Province(2004520014)
文摘In this paper, a model of translation gateway is proposed. The communications between IPv4 network and IPv6 network are realized by using the Microsoft intermediate driver technology in environment of Windows 2000.
基金Supported by the National Natural Science Foundation of China(No.61175074,11272205)
文摘A moving-mass control method is introduced to stratospheric airship for its special working condition of low atmospheric density and low speed.The dynamic equation of airship is derived by using the Newton-Euler method and the mechanism of attitude control by moving masses is studied.Then the passive gliding of airship by the moving masses is given based on the theory of glider,and attitude control capability between moving mass and elevator is compared at different airspeed.Analysis results show that the motion of masses changes the gravity center of the airship system,which makes the inertia tensor and the gravity moment vary.Meanwhile,the aerodynamic angles are generated,which results in the change of aerodynamic moment.Control efficiency of moving masses is independent of airspeed.Thus the moving-mass control has the advantage over the aerodynamic surfaces at low airspeed.
基金supported by the National Natural Science Foundation of China(Grant Nos.51075025,51175029)Beijing Natural Science Foundation of China(Grant No.3132019)the Program for New Century Excellent Talents in University of China(Grant No.NCET-12-0769)
文摘This paper presents the idea of constructing reconfigurable limbs by integrating metamorphic linkages as subchains.The planar five-bar metamorphic linkages that have three phases resulting from locking of motors are considered.Under the assumption that the constraint exerted by the reconfigurable limb can switch between no constraint,a constraint force,and a constraint couple,the output motions of the metamorphic linkage in its two planar four-bar linkage phases are identified.By adding an appropriate joint to planar four-bar linkages with translational output,four planar five-bar linkages that can be employed in the construction of reconfigurable limbs are enumerated.Serial chains that can provide a constraint couple and a constraint force are synthesized based on screw theory.Reconfigurable limbs that have three configurations associated with the three distinct phases of the metamorphic linkages are assembled with planar five-bar metamorphic linkages and serial chains with four degrees of freedom.A class of reconfigurable parallel mechanisms are constructed by connecting a moving platform and a base with three identical reconfigurable limbs.The degrees of freedom of the reconfigurable parallel mechanism in different configurations with the metamorphic linkages in different phases are given.Finally,the actuation scheme for this kind of mechanisms is addressed.
