数字X线摄影对比平衡滑块控件在诊断老年胸腰段椎体病变中的临床应用

目的探讨数字X线摄影对比平衡滑块控件在诊断老年胸腰段椎体病变中的临床应用价值。方法胸腰段椎体病变老年病患76例均采取数字X线摄影检测,并结合实际胸腰段椎体病变状况应用对比平衡滑块控件调整,保证病灶点位骨质影像数据的准确性,探析应用对比平衡滑块控件技术前后影像质量情况。结果在常规数字X线摄影胸腰段椎体正位摄片的甲级片率与对比平衡滑块控件优化后差异不明显(P>0.05);但是在胸腰段椎体侧位摄片图像中对比平衡滑块控件优化后甲片率明显优于常规数字X线摄影(P<0.05);将数字X线摄影对比平衡滑块控件优化后的胸腰段椎体病变诊断结果作为金标准评估常规数字X线摄影诊断准确率,结果表明常规数字X线摄影检测漏诊率为17.11%(13/76)、误诊率5.26%(4/76)。结论数字X线摄影对比平衡滑块控件诊断老年胸腰段椎体病变准确率较高,影像清晰度、对比度均得到明显的提升,可减少漏诊、误诊。

小型回转件平衡实验台的研制

介绍一种自制的小型台式回转件平衡检测实验装置,用于机械设计实验课的实验教学.除满足基本实验教学外,检测仪表还可用于现场回转件平衡.

应用逐件低速动平衡方法解决某离心压缩机试车振动解析

本文主要对某离心压缩机在厂内试车过程中振动超标的问题进行深入分析,指出了目前采用的叶轮低速平衡校正方法,不能使叶轮本身和其它部件自身的不平衡量真正消除。应用整机转子进行一次两个面的动平衡工艺方法,转子在低速平衡(刚性状态下)时是平衡的,但在高速运转下转子仍然存在较大的不平衡量。因此,提出逐件低速动平衡方法,解决了该离心压缩机试车振动故障。

基于线性系统理论的热网平衡方法——用“周期供热量”调节热网平衡

依据线性系统理论分析供热系统运行特点,建立了用“周期供热量”管理供热系统热力平衡的理论体系。通过应用说明了这种新理论体系具有好的可操作性。

基于高压隔离接地开关的分析

在高压电器中,隔离接地开关有着重要的作用,特别是在GIS中。本文就高压隔离接地开关进行了分析,并考虑到其安全性和稳定性,提出根据成本低和安全操作进行合理的选择及开关的检修建议。

Measurements of Hydrate Equilibrium Conditions for CH4, CO2, and CH4＋C2H6＋C3H8 in Various Systems by Step-heating Method

Phase equilibrium conditions of gas hydrate in several systems were measured by the step-heating method using the cylindrical transparent sapphire cell device.The experimental data for pure CH4 or CO2+deionized water systems showed good agreement with those in the literatures.This kind of method was then applied to CH4/CO2+sodium dodecyl sulfate(SDS)aqueous solution,CH4/CO2+SDS aqueous solution+silica sand,and(CH4+C2H6+C3H8)gas mixture+SDS aqueous solution systems,where SDS was added to increase the hydrate formation rate without evident influence on the equilibrium conditions.The feasibility and reliability of the step-heating method,especially for porous media systems and gas mixtures systems were determined.The experimental data for CO2+silica sand data shows that the equilibrium pressure will change significantly when the particle size of silica sand is less than 96μm.The formation equilibrium pressure was also measured by the reformation of hydrate.

Limit equilibrium method for slope stability based on assumed stress on slip surface

In the limit equilibrium framework, two- and three-dimensional slope stabilities can be solved according to the overall force and moment equilibrium conditions of a sliding body. In this work, based on Mohr-Coulomb(M-C) strength criterion and the initial normal stress without considering the inter-slice(or inter-column) forces, the normal and shear stresses on the slip surface are assumed using some dimensionless variables, and these variables have the same numbers with the force and moment equilibrium equations of a sliding body to establish easily the linear equation groups for solving them. After these variables are determined, the normal stresses, shear stresses, and slope safety factor are also obtained using the stresses assumptions and M-C strength criterion. In the case of a three-dimensional slope stability analysis, three calculation methods, namely, a non-strict method, quasi-strict method, and strict method, can be obtained by satisfying different force and moment equilibrium conditions. Results of the comparison in the classic two- and three-dimensional slope examples show that the slope safety factors calculated using the current method and the other limit equilibrium methods are approximately equal to each other, indicating the feasibility of the current method; further, the following conclusions are obtained: 1) The current method better amends the initial normal and shear stresses acting on the slip surface, and has the identical results with using simplified Bishop method, Spencer method, and Morgenstern-Price(M-P) method; however, the stress curve of the current method is smoother than that obtained using the three abovementioned methods. 2) The current method is suitable for analyzing the two- and three-dimensional slope stability. 3) In the three-dimensional asymmetric sliding body, the non-strict method yields safer solutions, and the results of the quasi-strict method are relatively reasonable and close to those of the strict method, indicating that the quasi-strict method can be used to obtain a reliable slope safety factor.

Reliable and Load Balance-Aware Multi-Controller Deployment in SDN

Software Defined Networking(SDN) provides flexible network management by decoupling control plane and data plane. However, such separation introduces the issues regarding the reliability of the control plane and controller load imbalance in the distributed SDN network, which will cause the low network stability and the poor controller performance. This paper proposes Reliable and Load balance-aware Multi-controller Deployment(RLMD) strategy to address the above problems. Firstly, we establish a multiple-controller network model and define the relevant parameters for RLMD. Then, we design the corresponding algorithms to implement this strategy. By weighing node efficiency and path quality, Controller Placement Selection(CPS) algorithm is introduced to explore the reliable deployments of the controllers. On this basis, we design Multiple Domain Partition(MDP) algorithm to allocate switches for controllers according to node attractability and controller load balancing rate, which could realize the reasonable domain planning. Finally, the simulations show that, compared with the typical strategies, RLMD has the better performance in improving the reliability of the control plane and balancing the distribution of the controller loads.

Equilibrium and kinetic Si isotope fractionation factors and their implications for Si isotope distributions in the Earth's surface environments

Several important equilibrium Si isotope fractionation factors among minerals,organic molecules and the H_4SiO_4 solution are complemented to facilitate the explanation of the distributions of Si isotopes in Earth's surface environments.The results reveal that,in comparison to aqueous H_4SiO_4,heavy Si isotopes will be significantly enriched in secondary silicate minerals.On the contrary,quadra-coordinated organosilicon complexes are enriched in light silicon isotope relative to the solution.The extent of ^(28)Si-enrichment in hyper-coordinated organosilicon complexes was found to be the largest.In addition,the large kinetic isotope effect associated with the polymerization of monosilicic acid and dimer was calculated,and the results support the previous statement that highly ^(28)Sienrichment in the formation of amorphous quartz precursor contributes to the discrepancy between theoretical calculations and field observations.With the equilibrium Si isotope fractionation factors provided here,Si isotope distributions in many of Earth's surface systems can be explained.For example,the change of bulk soil δ^(30)Si can be predicted as a concave pattern with respect to the weathering degree,with the minimum value where allophane completely dissolves and the total amount of sesquioxides and poorly crystalline minerals reaches their maximum.When,under equilibrium conditions,the well-crystallized clays start to precipitate from the pore solutions,the bulk soil δ^(30)Si will increase again and reach a constant value.Similarly,the precipitation of crystalline smectite and the dissolution of poorly crystalline kaolinite may explain the δ^(30)Si variations in the ground water profile.The equilibrium Si isotope fractionations among the quadracoordinated organosilicon complexes and the H_4SiO_4solution may also shed light on the Si isotope distributions in the Si-accumulating plants.

CFD simulation of spontaneous coal combustion in irregular patterns of goaf with multiple points of leaking air

Based on the non-linear air leakage seepage equation for an anisotropic porous medium, on the seepage diffusion equation of multicomponent gas and on the seepage synthetic heat transfer equation of a porous medium, the numerical model for field flow problems of irregular patterns of a goaf with multiple points of leaking air is established and simultaneously solved by the upwind mode finite element method (G3 computer program). According to the complexity of irregular patterns of a goaf with multiple points of leaking air, the flow pattern in a large area of such a goaf and the variation in gases of methane, oxygen and CO and in temperature are theoretically described. In the calculation, the goaf is regarded as a caving anisotropic medium and the coupling effect of methane effusion on spontaneous combustion is considered. The simulation results agree well with practical experience. In addition, the spontaneous combustion process is also simulated, indicating that 1) the spontaneous combustion often takes place near the area where fresh air leaks in and 2) the fire sources can be classified into static and dynamic zones. Therefore, in practical fire preventing and extinguishing, we should clearly distinguish the upstream air leaking points from the downstream ones in order to take proper measures for leakage stopping.

Unified bearing capacity model of confined concrete column subjected to axial compression

To better study the behavior of confined concrete, this paper presents the basic hypothesis of uhimate equilibrium of confined concrete and the unified yield criteria of confining material. Based on the static equilibrium condition and yield criteria of components, a unified bearing capacity model of confined concrete column is proposed, and a simplified calculating equation of the model is also given. The model captures the character of confined concrete column. Effects of the confinement effect ratio, the lateral confinement ratio, unconfined concrete strength and the properties of confining material on the bearing capacity of confined concrete column are carefully considered. The model may be applicable to the calculation of bearing capacity of steel-confined concrete, concrete filled steel tube and FRP-confined concrete. The predictions of the model agree well with test data.

High-pressure Phase Equilibria for Binary Ethanol System Containing Supercritical CO_2

High-pressure phase behavior of supercritical (SC) CO2+ethanol system was investigated at 333.2 K,348.2K, 353.2K, 368.2K, 413.2K and 453.2K and pressure from 2.0MPa to 14.3MPa. The measurement was carried out in a cylindrical autoclave with a moveable piston and a window for adjustment and observation of phase equilibria at given T and p. The samples were taken from two coexisting phases and were analyzed to obtain their compositions. It is shown that the solubility of SC CO2 in ethanol increases drastically with pressures at the given temperature, but the content of ethanol in CO2-rich phase increase faintly.

Unified expression for failure of reinforced concrete members in bridge

Reinforced concrete structural elements with box section are commonly used in the horizontal and vertical structure of bridges. The reinforced concrete structure in bridge often failed under the combined forces of bending, axial load, shear and torsion caused by wind and earthquake. It is very important to study the mechanism of RC box section structures subjected to a combi-nation of forces. A theoretical study and deduction of the unified expression for failure of reinforced concrete members with box section under combined bending, shear, axial force and torsion were carried out with stress equilibrium assumption. Comparison of theoretical analysis results with experimental results showed that the unified expression for failure of reinforced concrete members with box section can be used for static calculation of such structure members.

Quantum Monte Carlo Study of Frustrated Spin Chain under External Field

In this paper a stochastic series expansion quantum Monte Carlo algorithm is used to study a frustratedspin chain with diagonal next-nearest-neighbor interactions.The detailed balance conditions are carefully analyzed toimprove the efficiency of simulation process.As an application of this algothrim,the total magnetization,the staticstructure factor and spin-stiffness are calculated for a certain set of system parameters as a function of external fieldstrength.

Study of Isothermal Equilibrium,Kinetics and Thermodynamics of Adsorptive Desulfurization on Synthesized Cu~ⅠY~ⅢY Zeolite

Deep adsorptive desulfurization of low sulfur content gasoline via zeolite is a promising process.Herein,the Cu~ⅠY~ⅢY zeolite was prepared and the effect of adsorption conditions and aromatics on the performance of adsorptive desulfurization was studied.And the isothermal equilibrium and kinetics were also investigated.The results showed that upon using 10 m L of model oil and 0.2 g of the Cu~ⅠY~ⅢY adsorbent during the adsorption reaction,which was carried out at 323 K for 60 min,the benzothiophene(BT) desulfurization rate reached 98.4%.The impact of aromatics on the adsorptive desulfurization over the Cu~ⅠY~ⅢY zeolite decreased in the following order:ortho-xylene > meta-xylene > para-xylene.The equilibrium isotherm shows that the adsorption of benzothiophene over the as-prepared CuIYIIIY zeolite can be represented by the Langmuir model.And the kinetics can be more perfectly represented by the pseudo-second-order model than that of the pseudo-first-order one.The thermodynamic parameters(ΔG,ΔH) were both negative,which suggested that the adsorption process is monostratal,mass transfer controlled,spontaneous,and exothermic.

Optimum Determination of Partial Transmission Ratios of Coupled Planetary Gearboxes

This paper presents a new study on optimum determination of the partial ratios of coupled planetary gear sets for getting minimum radial size of the gear sets. In this paper, based on moment equilibrium condition of a mechanic system including two-row planetary gear sets and their regular resistance conditions, an explicit model for calculating the partial ratios of coupled planetary gear sets was proposed. In addition, by giving this effective model, the partial ratios can be calculated simply and accurately.

Optimum Calculation of Partial Transmission Ratios of Mechanical Driven Systems Using a V-belt and a Two-Step Bevel Helical Gearbox

This paper introduces a new study on the optimum calculation of partial transmission ratios of mechanical drive system using a V-belt and two-step bevel helical gearbox for getting minimum size of the system. In the paper, based on moment equilibrium condition of a mechanic system including V-belt and a two-gear-unit of the gearbox, models for optimum calculation of the partial ratios of the V-belt and the gearbox were proposed. As the models are explicit, the partial ratios can be calculated accurately and simply.

Deviation of Carbon Dioxide-Water Gas-Liquid Balance from Thermodynamic Equilibrium in Turbulence h Experiment and Correlation

The carbon dioxide-water system was used to investigate the flowing gas-liquid metastable state. The experiment was carded out in a constant volume vessel with a horizontal circulation pipe and a peristaltic pump forced CO2 saturated water to flow. The temperature and pressure were recorded. The results showed that some CO2 escaped from the water in the flow process and the pressure increased, indicating that the gas-liquid equilibrium was broken. The amount of escaped CO2 varied with flow speed and reached a limit in a few minutes, entitled dy- namic equilibrium. Temperature and liquid movement played the same important role in breaking the phase equilib- rium. Under the experimental conditions, the ratio of the excessive carbon dioxide in the gas phase to its thermody- namic equilibrium amount in the liquid could achieve 15%.

Influence of Operating Conditions on the Removal Cd Ions from Aqueous Media by Adsorption Using Chlamydomonas Reinhardtii

Chlamydomonas reinhardtii(C.reinhardtii) was used to study adsorption of cadmium(Cd) from aqueous media within various experimental conditions.Results showed that the adsorption process was very fast,with most of the adsorption occurring within 30 min of contact time and the equilibrium state was reached in about 60 min.The adsorption ability of the algae increases with the increasing adsorptions sites on cells.Maximum adsorption was observed at the initial Cd concentration of 100 mg/L and pH 6.0. The adsorption was markedly inhibited in the presence of calcium and magnesium ions at 10 mM and the Cd removal efficiency was reduced by 16.54%and 14.99%respectively.This study would be a finding of note with regard to practical wastewater treatment.

Research on DCC Strategy for Grid-Connected Inverter of D-PMSG under Unbalanced Network Voltage Conditions

According to performance analysis of a three-phase grid-connected inverter mathematical model of a directly-driven wind turbine with a permanent magnet synchronous generator (D-PMSG) under unbalanced network voltage conditions, a dual current-loop control strategy (DCC) oriented on positive voltage and negative current is proposed to inhibit the DC voltage fluctuation. Meanwhile, a notch filter is introduced into the conventional control strategy of a phase-locked loop to complete the low voltage ride through (LVRT) ability of the wind generator. A 1.5-MW D-PMSG with a back-to-back IGBT frequency converter was simulated in the PSCAD/EMTDC environment, and simulation results showed that: the maximum wind power tracking was achieved in this system and the proposed DCC strategy could successfully inhibit the rising aging of DC voltage and enhance the ride-through capability of D-PMSG wind generation system under unbalanced network voltage conditions.