To improve the energy efficiency and load-balance in large-scale multi-agent systems, a large-scale distributed cluster algorithm is proposed. At first, a parameter describing the spatial distribution of agents is des...To improve the energy efficiency and load-balance in large-scale multi-agent systems, a large-scale distributed cluster algorithm is proposed. At first, a parameter describing the spatial distribution of agents is designed to assess the information spreading capability of an agent. Besides, a competition resolution mechanism is proposed to tackle the competition problem in large-scale multiagent systems. Thus, the proposed algorithm can balance the load, adjust the system network locally and dynamically, reduce system energy consumption. Finally, simulations are presented to demonstrate the superiority of the proposed algorithm.展开更多
In this study, a transonic flow past NACA0012 profile at angle of attack α=0^0 whose aspect ratio AR is 1.0 with non-equilibrium condensation is analyzed by numerical analysis using a TVD scheme and is investigated u...In this study, a transonic flow past NACA0012 profile at angle of attack α=0^0 whose aspect ratio AR is 1.0 with non-equilibrium condensation is analyzed by numerical analysis using a TVD scheme and is investigated using an intermittent indraft type supersonic wind tunnel. Transonic flows of 0.78-0.90 in free stream Mach number with the variations of the stagnation relative humidity（φ0） are tested. For the same free stream Mach number, the increase in φ0 causes decrease in the drag coefficient of profile which is composed of the drag components of form, viscous and wave. In the case of the same Moo and To, for more than φ0=30%, despite the irreversibility of process in non-equilibrium condensation, the drag by shock wave decreases considerably with the increase of φ0. On the other hand, it shows that the effect of condensation on the drag coefficients of form and viscous is negligible. As an example, the decreasing rate in the drag coefficient of profile caused by the influence of non-equilibrium condensation for the case of M∞=0.9 and φ0 =50% amounts to 34%. Also, it were turned out that the size of supersonic bubble （that is, the maximum height of supersonic zone） and the deviation of pressure coefficient from the value for M=1 decrease with the increase of φ0 for the same M∞.展开更多
In this paper we give an appropriate energy equation considering the diffusion and the energy production contributions of species for a complex coupled system with chemical reaction. It is shown that the contribution ...In this paper we give an appropriate energy equation considering the diffusion and the energy production contributions of species for a complex coupled system with chemical reaction. It is shown that the contribution of the mass diffusion on the internal energy is the same whether it is introduced by the mass flow through the outer boundary or by the inner chemical reaction. In addition, the diffusion is a purely irreversible process and does not produce reversible entropy or entropy flow. Based on this theory a new entropy production rate equation is derived for the coupled thermal diffusive chemical heterogeneous system. The evolution equations of the heat conduction and the mass diffusion derived from this theory are fully consistent with the Fourier and Fick＇s laws.展开更多
A cable dome has no stiffness or load carrying capacity unless it has been prestressed.Analyses of cable domes are based on successful prestressing designs,making force finding analysis very important.A new force find...A cable dome has no stiffness or load carrying capacity unless it has been prestressed.Analyses of cable domes are based on successful prestressing designs,making force finding analysis very important.A new force finding method named the imbal-ance force iterative method is proposed,which can overcome some limitations of the integrity feasible prestressing method.For instance,even if groups are assigned by mistake,the pretension distribution that satisfies the known geometry form can also be found.This method possess good stability and calculation efficiency,and a case study indicates that it is applicable to the force finding of large and complicated cable domes.On the other hand,form finding analysis of cable domes is also a key engineering problem.However,rigid displacement occurs in this process,which makes the analysis more complex.In this pa-per,the dynamic relaxation method was selected,and the problem of rigid displacement was therefore effectively solved.The method includes two steps:first,the stretching cables are released,and secondly,an axial force is imposed on the two ends of each released cable.This method is convenient in its calculation and clear in its conception.A case study indicates that the method is suitable for the simulation of the construction process of various cable domes and cable-strut tension structures.Moreover,a form finding experiment was conducted on a model of a cable dome with a diameter of 4.8 m by tensing diagonal cables.The behavior of the model in the form finding process was investigated.The experimental results indicate that the ini-tial lengths of members and prestress loss are key issues in cable domes design.The results also prove that the methods of form finding and force finding proposed in this paper are reliable and effective.展开更多
基金supported by Projects of Major International(Regional)Joint Research Program NSFC under Grant No.61720106011the National Natural Science Foundation of China under Grant Nos.61573062,61621063,and 61673058+3 种基金Program for Changjiang Scholars and Innovative Research Team in University under Grant No.IRT1208Beijing Education Committee Cooperation Building Foundation Project under Grant No.2017CX02005Beijing Advanced Innovation Center for Intelligent Robots and Systems(Beijing Institute of Technology)Key Laboratory of Biomimetic Robots and Systems(Beijing Institute of Technology),Ministry of Education,Beijing,China
文摘To improve the energy efficiency and load-balance in large-scale multi-agent systems, a large-scale distributed cluster algorithm is proposed. At first, a parameter describing the spatial distribution of agents is designed to assess the information spreading capability of an agent. Besides, a competition resolution mechanism is proposed to tackle the competition problem in large-scale multiagent systems. Thus, the proposed algorithm can balance the load, adjust the system network locally and dynamically, reduce system energy consumption. Finally, simulations are presented to demonstrate the superiority of the proposed algorithm.
基金supported by Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education,Science and Technology(2012-0004567)Kyungpook National University Research Fund 2012
文摘In this study, a transonic flow past NACA0012 profile at angle of attack α=0^0 whose aspect ratio AR is 1.0 with non-equilibrium condensation is analyzed by numerical analysis using a TVD scheme and is investigated using an intermittent indraft type supersonic wind tunnel. Transonic flows of 0.78-0.90 in free stream Mach number with the variations of the stagnation relative humidity（φ0） are tested. For the same free stream Mach number, the increase in φ0 causes decrease in the drag coefficient of profile which is composed of the drag components of form, viscous and wave. In the case of the same Moo and To, for more than φ0=30%, despite the irreversibility of process in non-equilibrium condensation, the drag by shock wave decreases considerably with the increase of φ0. On the other hand, it shows that the effect of condensation on the drag coefficients of form and viscous is negligible. As an example, the decreasing rate in the drag coefficient of profile caused by the influence of non-equilibrium condensation for the case of M∞=0.9 and φ0 =50% amounts to 34%. Also, it were turned out that the size of supersonic bubble （that is, the maximum height of supersonic zone） and the deviation of pressure coefficient from the value for M=1 decrease with the increase of φ0 for the same M∞.
文摘In this paper we give an appropriate energy equation considering the diffusion and the energy production contributions of species for a complex coupled system with chemical reaction. It is shown that the contribution of the mass diffusion on the internal energy is the same whether it is introduced by the mass flow through the outer boundary or by the inner chemical reaction. In addition, the diffusion is a purely irreversible process and does not produce reversible entropy or entropy flow. Based on this theory a new entropy production rate equation is derived for the coupled thermal diffusive chemical heterogeneous system. The evolution equations of the heat conduction and the mass diffusion derived from this theory are fully consistent with the Fourier and Fick＇s laws.
文摘A cable dome has no stiffness or load carrying capacity unless it has been prestressed.Analyses of cable domes are based on successful prestressing designs,making force finding analysis very important.A new force finding method named the imbal-ance force iterative method is proposed,which can overcome some limitations of the integrity feasible prestressing method.For instance,even if groups are assigned by mistake,the pretension distribution that satisfies the known geometry form can also be found.This method possess good stability and calculation efficiency,and a case study indicates that it is applicable to the force finding of large and complicated cable domes.On the other hand,form finding analysis of cable domes is also a key engineering problem.However,rigid displacement occurs in this process,which makes the analysis more complex.In this pa-per,the dynamic relaxation method was selected,and the problem of rigid displacement was therefore effectively solved.The method includes two steps:first,the stretching cables are released,and secondly,an axial force is imposed on the two ends of each released cable.This method is convenient in its calculation and clear in its conception.A case study indicates that the method is suitable for the simulation of the construction process of various cable domes and cable-strut tension structures.Moreover,a form finding experiment was conducted on a model of a cable dome with a diameter of 4.8 m by tensing diagonal cables.The behavior of the model in the form finding process was investigated.The experimental results indicate that the ini-tial lengths of members and prestress loss are key issues in cable domes design.The results also prove that the methods of form finding and force finding proposed in this paper are reliable and effective.
