The global long-term sea level trend is obtained from the analysis of tide gauge data and TOPEX/Poseidon data. The linear trend of global mean sea level is highly non-uniform spatially, with an average rate of 2.2 mmy...The global long-term sea level trend is obtained from the analysis of tide gauge data and TOPEX/Poseidon data. The linear trend of global mean sea level is highly non-uniform spatially, with an average rate of 2.2 mmyear^-1 in T/P sea-level rise from October 1992 to September 2002. Sea level change due to temperature variation （the thermosteric sea level） is discussed. The results are compared with TOPEX/Poseidon altimeter data in the same temporal span at different spatial scales. It is indicated that the thermal effect accounts for 86% and 73% of the observed seasonal variability in the northern and southern hemispheres, respectively. The TOPEX/Poseidon observed sea level lags behind the TSL by 2 months in the zonal band of 40%-60% in both the northern and southern hemispheres. Systematic differences of about 1-2 cm between TOPEX/Poseidon observations and thermosteric sea level data are obtained. The potential causes tbr these differences include water exchange among the atmosphere, land, and oceans, and some possible deviations in thermosteric contribution estimates and geophysical corrections to the TOPEX/Poseidon data.展开更多
For eliminating the negative effects of lock-in region and optical elements in cavity,the non-planar structure is strongly needed in laser gyro. In this paper,the theoretical formula of rotatory effect in non-planar c...For eliminating the negative effects of lock-in region and optical elements in cavity,the non-planar structure is strongly needed in laser gyro. In this paper,the theoretical formula of rotatory effect in non-planar cavity is presented deducing from basic light propagating law. Based on the 8-like plane cavity,a novel non-planar structure is designed and numerically calculated. The results show that for obtaining the required rotatory angle,it just needs to adjust the structural parameters of the original 8-like plane cavity. The four-frequency-differential laser gyro which adopts the non-planar 8-like structure has the same advantages as those with the planar 8-like structure,such as the gain region locates at one leg,the position of Faraday rotator has better spatial symmetry and the coating films of the output mirror is easily designed.展开更多
The network resource allocation in SDN for control applications is becoming a key problem in the near future because of the conflict between the need of the flow-level flexibility control and the limited capacity of f...The network resource allocation in SDN for control applications is becoming a key problem in the near future because of the conflict between the need of the flow-level flexibility control and the limited capacity of flow table.Based on the analysis of the difference of the definition of network resource between SDN and traditional IP network,the idea of the integrated allocation of link bandwidth and flow table for multiple control applications in SDN is proposed in this paper.Furthermore,a price-based joint allocation model of network resource in SDN is built by introducing the price for each of the resources,which can get the proportional fair allocation of link bandwidth and the minimum global delay at the same time.We have also designed a popular flow scheduling policy based on the proportional fair allocation of link bandwidth in order to achieve the minimum global delay.A flow scheduling module has been implemented and evaluated in Floodlight,named virtual forwarding space(VFS).VFS can not only implement the fair allocation of link bandwidth and minimum delay flow scheduling in data plane but also accelerate packet forwarding by looking up control rules in control plane.展开更多
E1 Nino events with an eastern Pacific pattern （EP） and central Pacific pattern （CP） were first separated using rotated empirical orthogonal functions （REOF）. Lead/lag regression and rotated singular value decom...E1 Nino events with an eastern Pacific pattern （EP） and central Pacific pattern （CP） were first separated using rotated empirical orthogonal functions （REOF）. Lead/lag regression and rotated singular value decomposition （RSVD） analyses were then carried out to study the relation between the surface zonal wind （SZW） anomalies and sea surface temperature （SST） anomalies in the tropical Pacific. A possible physical process for the CP E1 Nifio was proposed. For the EP E1 Nino, strong westerly anomalies that spread eastward continuously produce an anomalous ocean zonal convergence zone （ZCZ） centered on about 165°W. This SZW anomaly pattern favors poleward and eastward Sverdrup transport at the equator. For the CP E1Nino, westerly anomalies and the ZCZ are mainly confined to the western Pacific, and easterly anomalies blow in the eastern Pacific. This SZW anomaly pattern restrains poleward and eastward Sverdrup transport at the equator; however, there is an eastward Sverdrup transport at about 5°N, which favors the wanning of the north-eastern tropical Pacific. It is found that the slowness of eastward propagation of subsurface warm water （partly from the downwelling caused by Ekman convergence and the ZCZ） is due to the slowdown of the undercurrent in the central basin, and vertical advection in the central Pacific may be important in the formation and disappearance of the CP E1 Nifio.展开更多
The roll contour pattern and variety of work and backup rolls in service and its effect on profile and flatness control performance in 1 700 mm hot strip mill at Wuhan Iron and Steel(Group) Corporation were tested and...The roll contour pattern and variety of work and backup rolls in service and its effect on profile and flatness control performance in 1 700 mm hot strip mill at Wuhan Iron and Steel(Group) Corporation were tested and analyzed by the developed finite element models of different typical roll contours configurations.A rather smooth local work roll contour near strip edges and an increase in rolled length can be obtained by application of long stroke work roll shifting system with conventional work roll contours that is incapable of the crown control.In comparison with the conventional backup and work roll contours configuration,the crown control range by the roll bending force enhances by 12.79% and the roll gap stiffness increases by 25.26% with the developed asymmetry self-compensating work rolls(ASR) and varying contact backup rolls(VCR).A better strip profile and flatness quality,an increase in coil numbers within the rolling campaign and a significant alleviated effect of severe work roll wear contours on performance of edge drop control are achieved by the application of ASR with crown control and wear control ability in downstream stand F5 and VCR in all stands of 1 700 mm hot strip mill.展开更多
Recent and constant demands for greater power densities and smaller sizes of electronic systems have stimulated the growth of new designs of different passive heat transfer methods such as heat pipes. Particularly, OH...Recent and constant demands for greater power densities and smaller sizes of electronic systems have stimulated the growth of new designs of different passive heat transfer methods such as heat pipes. Particularly, OHPs （Oscillating Heat Pipes） are relatively novel devices, capable of removing high heat rates over long and short distances with not much temperature drop. This study concentrates on the design, building and assembling a test rig in order to analyse the flow pattern ofdeionised water through a 5 turns flat plate oscillating heat pipe under different heat inputs, which was made in the school of engineering and materials science of the Queen Mary University of London by two energy M.Sc. students. The filling ratio of the water is 40%. Furthermore an experimental study on the OHP thermal performance is carried out in order to examine the effects of different surface wet conditions： super hydrophilic, hydrophilic and cleaned brass. It is demonstrated the formation of liquid slugs and vapour plugs of the water along the channels. The experimental results showed that the hydrophilic surface tends to be more energy efficient. The heat transfer performance of the super-hydrophilic and hydrophilic is higher than brass by 5-12% and 15-20% respectively.展开更多
基金supported by the NSFC projects (Nos. 40376005, 40676013, 40506006 and 40676015)the SRFDP project (No. 20060423014)+1 种基金NCET-04-0646 Key Scientific Research Program (No. 2007CB411807)National Key Technology R&D Program (No. 2007BAC- 03A06-06)
文摘The global long-term sea level trend is obtained from the analysis of tide gauge data and TOPEX/Poseidon data. The linear trend of global mean sea level is highly non-uniform spatially, with an average rate of 2.2 mmyear^-1 in T/P sea-level rise from October 1992 to September 2002. Sea level change due to temperature variation （the thermosteric sea level） is discussed. The results are compared with TOPEX/Poseidon altimeter data in the same temporal span at different spatial scales. It is indicated that the thermal effect accounts for 86% and 73% of the observed seasonal variability in the northern and southern hemispheres, respectively. The TOPEX/Poseidon observed sea level lags behind the TSL by 2 months in the zonal band of 40%-60% in both the northern and southern hemispheres. Systematic differences of about 1-2 cm between TOPEX/Poseidon observations and thermosteric sea level data are obtained. The potential causes tbr these differences include water exchange among the atmosphere, land, and oceans, and some possible deviations in thermosteric contribution estimates and geophysical corrections to the TOPEX/Poseidon data.
文摘For eliminating the negative effects of lock-in region and optical elements in cavity,the non-planar structure is strongly needed in laser gyro. In this paper,the theoretical formula of rotatory effect in non-planar cavity is presented deducing from basic light propagating law. Based on the 8-like plane cavity,a novel non-planar structure is designed and numerically calculated. The results show that for obtaining the required rotatory angle,it just needs to adjust the structural parameters of the original 8-like plane cavity. The four-frequency-differential laser gyro which adopts the non-planar 8-like structure has the same advantages as those with the planar 8-like structure,such as the gain region locates at one leg,the position of Faraday rotator has better spatial symmetry and the coating films of the output mirror is easily designed.
基金Supported by the National High-tech R&D Program("863" Program) of China (No.2013AA013505)the National Science Foundation of China(No.61472213)National Research Foundation of Korea(NRF 2014K1A1A2064649)
文摘The network resource allocation in SDN for control applications is becoming a key problem in the near future because of the conflict between the need of the flow-level flexibility control and the limited capacity of flow table.Based on the analysis of the difference of the definition of network resource between SDN and traditional IP network,the idea of the integrated allocation of link bandwidth and flow table for multiple control applications in SDN is proposed in this paper.Furthermore,a price-based joint allocation model of network resource in SDN is built by introducing the price for each of the resources,which can get the proportional fair allocation of link bandwidth and the minimum global delay at the same time.We have also designed a popular flow scheduling policy based on the proportional fair allocation of link bandwidth in order to achieve the minimum global delay.A flow scheduling module has been implemented and evaluated in Floodlight,named virtual forwarding space(VFS).VFS can not only implement the fair allocation of link bandwidth and minimum delay flow scheduling in data plane but also accelerate packet forwarding by looking up control rules in control plane.
基金Supported by the National Natural Science Foundation of China(Nos.41076010,41206017)the National Basic Research Program of China(973 Program)(No.2012CB417402)
文摘E1 Nino events with an eastern Pacific pattern （EP） and central Pacific pattern （CP） were first separated using rotated empirical orthogonal functions （REOF）. Lead/lag regression and rotated singular value decomposition （RSVD） analyses were then carried out to study the relation between the surface zonal wind （SZW） anomalies and sea surface temperature （SST） anomalies in the tropical Pacific. A possible physical process for the CP E1 Nifio was proposed. For the EP E1 Nino, strong westerly anomalies that spread eastward continuously produce an anomalous ocean zonal convergence zone （ZCZ） centered on about 165°W. This SZW anomaly pattern favors poleward and eastward Sverdrup transport at the equator. For the CP E1Nino, westerly anomalies and the ZCZ are mainly confined to the western Pacific, and easterly anomalies blow in the eastern Pacific. This SZW anomaly pattern restrains poleward and eastward Sverdrup transport at the equator; however, there is an eastward Sverdrup transport at about 5°N, which favors the wanning of the north-eastern tropical Pacific. It is found that the slowness of eastward propagation of subsurface warm water （partly from the downwelling caused by Ekman convergence and the ZCZ） is due to the slowdown of the undercurrent in the central basin, and vertical advection in the central Pacific may be important in the formation and disappearance of the CP E1 Nifio.
基金Project(20040311890) supported by the Science and Technology Development Foundation of University of Science and Technology Beijing
文摘The roll contour pattern and variety of work and backup rolls in service and its effect on profile and flatness control performance in 1 700 mm hot strip mill at Wuhan Iron and Steel(Group) Corporation were tested and analyzed by the developed finite element models of different typical roll contours configurations.A rather smooth local work roll contour near strip edges and an increase in rolled length can be obtained by application of long stroke work roll shifting system with conventional work roll contours that is incapable of the crown control.In comparison with the conventional backup and work roll contours configuration,the crown control range by the roll bending force enhances by 12.79% and the roll gap stiffness increases by 25.26% with the developed asymmetry self-compensating work rolls(ASR) and varying contact backup rolls(VCR).A better strip profile and flatness quality,an increase in coil numbers within the rolling campaign and a significant alleviated effect of severe work roll wear contours on performance of edge drop control are achieved by the application of ASR with crown control and wear control ability in downstream stand F5 and VCR in all stands of 1 700 mm hot strip mill.
文摘Recent and constant demands for greater power densities and smaller sizes of electronic systems have stimulated the growth of new designs of different passive heat transfer methods such as heat pipes. Particularly, OHPs （Oscillating Heat Pipes） are relatively novel devices, capable of removing high heat rates over long and short distances with not much temperature drop. This study concentrates on the design, building and assembling a test rig in order to analyse the flow pattern ofdeionised water through a 5 turns flat plate oscillating heat pipe under different heat inputs, which was made in the school of engineering and materials science of the Queen Mary University of London by two energy M.Sc. students. The filling ratio of the water is 40%. Furthermore an experimental study on the OHP thermal performance is carried out in order to examine the effects of different surface wet conditions： super hydrophilic, hydrophilic and cleaned brass. It is demonstrated the formation of liquid slugs and vapour plugs of the water along the channels. The experimental results showed that the hydrophilic surface tends to be more energy efficient. The heat transfer performance of the super-hydrophilic and hydrophilic is higher than brass by 5-12% and 15-20% respectively.
