Thesubsea dynamic riser base （SDRB） is an important piece of equipment for the floating production platform mooring system.One end is connected to the rigid pipeline, carrying a rigid pipeline thermal expansion load...Thesubsea dynamic riser base （SDRB） is an important piece of equipment for the floating production platform mooring system.One end is connected to the rigid pipeline, carrying a rigid pipeline thermal expansion load and the other end is connected to a flexible riser, carrying the dynamic load of the flexible riser, so its function is a transition connection between the flexible riser and the rigid pipeline which fixes the flexible riser on the seabed. On the other hand. as a typical subsea product, the design will satisfythe requirements of the standards for subsea products. By studying the stress analysisphilosophy of the topside piping and subsea pipeline, a physical model and procedure for piping stress analysis of the SDRB have been established.The conditions of the adverse design load have been considered, and a combination of the static load from the rigid pipeline and the dynamic load flexibility has also been optimized. And a comparative analysis between the AMSE, DNV and API standards for piping stress with the checking rules has been done.Because theSDRB belongs to the subsea pipeline terminal product, the use of DNV standards to check its process piping stress is recommended. Finally, the process piping stress of the SDRB has been calculated, and the results show that the jacket pipe and the carrier pipe stress of the SDRB process piping satisfy the DNV standards as a whole.The bulkhead cannot be accurately simulated by the AutoPIPE software which uses the FEA software ANSYS inthe detailed analysis, but the checking results will still meet the requirements of the DNV standards.展开更多
Ceramic materials are notable for their rigidity, insulation and resistance to hostile environment, Nevertheless, if a stressed ceramic component is exposed to chemical attack, it may suffer from a form of delayed fra...Ceramic materials are notable for their rigidity, insulation and resistance to hostile environment, Nevertheless, if a stressed ceramic component is exposed to chemical attack, it may suffer from a form of delayed fracture known as static fatigue. From the point of view of a designer, it is clearly desirable to determine the behavior of sub-critical crack growth; the crack path and crack growth rate, as a function of material properties and loading conditions are of particular interest. This paper presents a review of advances in stress assisted corrosion problem in history and its corresponding numerical approaches in the last decades, and finally, comes uo with consideration and crucial suggestions for future work.展开更多
Based on the APDL （ANSYS Parametric Design Language） and combined with the actual project related to parameters of filling material, imported Duncan-Chang constitutive model which has been widely applied in soil mas...Based on the APDL （ANSYS Parametric Design Language） and combined with the actual project related to parameters of filling material, imported Duncan-Chang constitutive model which has been widely applied in soil mass and rock-fill in the ANSYS software. With the three-dimensional nonlinear finite element analysis by the mid-point incremental method, what have been computed are the deformation and stress analysis ofNa Ba reservoir CFRD （Concrete Face Rock-fill Dam） in filling period. The calculation results provide practical reference for the dam during construction safety filling stress and deformation analysis and real-time monitoring.展开更多
In order to obtain the performance of the offshore wind turbine tripod foundation, a tripod foundation model was built by ANSYS. The static analysis, modal analysis and the transient dynamic analysis were run. Differe...In order to obtain the performance of the offshore wind turbine tripod foundation, a tripod foundation model was built by ANSYS. The static analysis, modal analysis and the transient dynamic analysis were run. Different parameters such as displacement, velocity, acceleration, stress were obtained and by analyzing these data, it is reasonable to draw a conclusion that the tripod foundation has a good performance used on the offshore wind turbine.展开更多
A 3-D modeling of FEA （finite element analysis） design provides for high-speed synchronous with PMs （permanent magnets） applied in aerospace application will be examined under design considerations ofn = 12,000 rp...A 3-D modeling of FEA （finite element analysis） design provides for high-speed synchronous with PMs （permanent magnets） applied in aerospace application will be examined under design considerations ofn = 12,000 rpm, short-duty operation, and etc. for an ARWM （aerospace retraction wheel motor）. First, lumped-elements will be fine-tuned following numerical method results is reported steady-state and transient solutions. Besides, the equations of thermal modeling such as Re, N,,, G,. and Pr numbers in order to calculate heat-transfer coefficient of convection on the rotor and stator surfaces in the air-gap have calculated. This section illustrates the temperature distribution of each point in a clear view. By CFD （fluid dynamic analysis） analysis, the fluid dynamics were modeled, pressure and velocity streamlines of cooling-flow have analyzed. An optimization algorithm was derived in order to have optimized number of water-channels as well. Second, calculation of nodal and tangential forces which deal with mechanical stresses of the ARWM have represented. The paper discusses an accurate magnetic-field analysis that addresses equivalent stress distribution in the magnetic core through using the transient FEA to estimate motor characteristics. The whole model shear and normal mechanical stresses and total deformation oftbe ARWM has been investigated by transient FEA. The end-winding effects were included by the authors.展开更多
基金financially supported by Offshore Engineering Equipment Scientific Research Project--Topic on Subsea Production System DesignKey Equipment Research & Development from Ministry of Industry and Information Technology of the People's Republic of China E-0813C003
文摘Thesubsea dynamic riser base （SDRB） is an important piece of equipment for the floating production platform mooring system.One end is connected to the rigid pipeline, carrying a rigid pipeline thermal expansion load and the other end is connected to a flexible riser, carrying the dynamic load of the flexible riser, so its function is a transition connection between the flexible riser and the rigid pipeline which fixes the flexible riser on the seabed. On the other hand. as a typical subsea product, the design will satisfythe requirements of the standards for subsea products. By studying the stress analysisphilosophy of the topside piping and subsea pipeline, a physical model and procedure for piping stress analysis of the SDRB have been established.The conditions of the adverse design load have been considered, and a combination of the static load from the rigid pipeline and the dynamic load flexibility has also been optimized. And a comparative analysis between the AMSE, DNV and API standards for piping stress with the checking rules has been done.Because theSDRB belongs to the subsea pipeline terminal product, the use of DNV standards to check its process piping stress is recommended. Finally, the process piping stress of the SDRB has been calculated, and the results show that the jacket pipe and the carrier pipe stress of the SDRB process piping satisfy the DNV standards as a whole.The bulkhead cannot be accurately simulated by the AutoPIPE software which uses the FEA software ANSYS inthe detailed analysis, but the checking results will still meet the requirements of the DNV standards.
基金Project supported by the Special Scholar Grant of Zhejiang Ocean University (No. 20051217), and Education Department of Zhejiang Province (No. 20061137), China
文摘Ceramic materials are notable for their rigidity, insulation and resistance to hostile environment, Nevertheless, if a stressed ceramic component is exposed to chemical attack, it may suffer from a form of delayed fracture known as static fatigue. From the point of view of a designer, it is clearly desirable to determine the behavior of sub-critical crack growth; the crack path and crack growth rate, as a function of material properties and loading conditions are of particular interest. This paper presents a review of advances in stress assisted corrosion problem in history and its corresponding numerical approaches in the last decades, and finally, comes uo with consideration and crucial suggestions for future work.
文摘Based on the APDL （ANSYS Parametric Design Language） and combined with the actual project related to parameters of filling material, imported Duncan-Chang constitutive model which has been widely applied in soil mass and rock-fill in the ANSYS software. With the three-dimensional nonlinear finite element analysis by the mid-point incremental method, what have been computed are the deformation and stress analysis ofNa Ba reservoir CFRD （Concrete Face Rock-fill Dam） in filling period. The calculation results provide practical reference for the dam during construction safety filling stress and deformation analysis and real-time monitoring.
文摘In order to obtain the performance of the offshore wind turbine tripod foundation, a tripod foundation model was built by ANSYS. The static analysis, modal analysis and the transient dynamic analysis were run. Different parameters such as displacement, velocity, acceleration, stress were obtained and by analyzing these data, it is reasonable to draw a conclusion that the tripod foundation has a good performance used on the offshore wind turbine.
文摘A 3-D modeling of FEA （finite element analysis） design provides for high-speed synchronous with PMs （permanent magnets） applied in aerospace application will be examined under design considerations ofn = 12,000 rpm, short-duty operation, and etc. for an ARWM （aerospace retraction wheel motor）. First, lumped-elements will be fine-tuned following numerical method results is reported steady-state and transient solutions. Besides, the equations of thermal modeling such as Re, N,,, G,. and Pr numbers in order to calculate heat-transfer coefficient of convection on the rotor and stator surfaces in the air-gap have calculated. This section illustrates the temperature distribution of each point in a clear view. By CFD （fluid dynamic analysis） analysis, the fluid dynamics were modeled, pressure and velocity streamlines of cooling-flow have analyzed. An optimization algorithm was derived in order to have optimized number of water-channels as well. Second, calculation of nodal and tangential forces which deal with mechanical stresses of the ARWM have represented. The paper discusses an accurate magnetic-field analysis that addresses equivalent stress distribution in the magnetic core through using the transient FEA to estimate motor characteristics. The whole model shear and normal mechanical stresses and total deformation oftbe ARWM has been investigated by transient FEA. The end-winding effects were included by the authors.
