应用微机对双侧电源变压器纵差保护的优化整定计算

应用微机作变压器纵差保护整定计算,国内刊物上都是针对单侧电源。本文提出的程序不但适用于双侧电源,而且可在众多答案中选出一组灵敏度最高的答案.

浅谈冶炼企业用变压器电能计量装置的选择与应用

随着我国工业的迅速发展,尤其是冶炼企业的不断成熟与壮大,冶炼企业在生产过程中对电能的需求量越来越大,所以在企业生产过程中为一台高压变压器选择适当的电能计量装置以保障企业正常的生产运作是非常重要的。文章对冶炼企业用变压器电能计量装置的选择与应用进行了阐述。

Compressively Strained InGaAs/InGaAsP Quantum Well Distributed Feedback Laser at 1.74μm

The compressively strained InGaAs/InGaAsP quantum well distributed feedback laser with ridge-wave- guide is fabricated at 1.74μm. It is grown by low-pressure metal organic chemical vapor deposition（MOCVD）. A strain buffer layer is used to avoid indium segregation. The threshold current of the device uncoated with length of 300μm is 11.5mA. The maximum output power is 14mW at 100mA. A side mode suppression ratio of 35.5dB is obtained.

Development of Novel Thin-Film SOI High Voltage MOSFET

Two kinds of thin-film SOI high voltage MOSFETs are developed.One is general structure,the other is novel two-drift-region structure.The gate width is 760μm,and the active area is 8.58×10 -2 mm 2.The experiments show that the breakdown voltages of the two-drift-region and general structures are 26V and 17V,respectively,and the on resistances are 65Ω and 80Ω,respectively.

Approximate Well Width and Optical Gain Formulas of 1 .555μm In_(1-x-y )Ga_y Al_x As Compressively Strained Quantum- Well Laser

Using Harrison's model and anisotropic parabolic approximation,the band structure of In1- x- y Gay Alx As compressively strained quantum wells is calculated.To design lasers with1.55μm wavelength,it is necessary to an- alyze the well width,differential gain,transparency carrier density and the characteristic gain for an arbitrary com- position.Some useful empirical formulas are also presented.

Nonlinear static characteristics of piezoelectric unimorph bending micro actuators

The nonlinear static characteristic of a piezoelectric unimorph cantilever micro actuator driven by a strong applied electric field is studied based on the couple stress theory.The cantilever actuator consists of a piezoelectric layer,a passive（elastic）layer and two electrode layers.First,the nonlinear static characteristic of the actuator caused by the electrostriction of the piezoelectric layer under a strong applied electric field is analyzed using the Rayleigh-Ritz method.Secondly,since the thickness of the cantilever beam is in micro scale and there exists a size effect,the size dependence of the deformation behavior is evaluated using the couple stress theory.The results show that the nonlinearities of the beam deflection increase along with the increase of the applied electric field which means that softening of the micro beam rigidity exists when a strong external electric field is applied.Meanwhile,the optimal value of the thickness ratio for the passive layer and the piezoelectric layer is not around 1.0 which is usually adopted by some previous researchers.Since there exists a size effect of the micro beam deflection,the optimal value of this thickness ratio should be greater than 1.0 in micro scale.

Pressure Fluctuation in the Submerged Circulative Impinging Stream Reactor

Pressure fluctuation in the submerged circulative impinging stream reactor （SCISR） is studied by measuring the dynamic pressure with micro pressure sensors of high accuracy, with water as the process material. Experimental results show that the maximum amplitude of fluctuation can be up to about 1.6kPa. On the power spectra the fluctuation is relatively concentrated in the range of 〈1000Hz, with some weak peeks in acoustic wave range. The space profile of intensive fluctuation region in the reactor is determined. The region is found to take the form of a couple truncated cones of empty core, with coincided bottoms, and is symmetrical with respect to the impinging plane and approximately symmetrical about the axis, essentially independent of u0. The integral intensity of fluctuation increases as the impinging velocity, Uo increasing.

Gastric accommodation assessed by ultrasonography

Gastric accommodation is important for the understanding of the pathophysiology in functional dyspepsia and is also relevant for symptom generation in other disorders. The term gastric accommodation has at least three different meanings： The accommodation process, the accommodation reflex, and the accommodation response. The gastric accommodation process is a complex phenomenon that describes how the size of the gastric compartment changes in response to a meal. The electronic barostat is considered the gold standard in assessing gastric accommodation. Imaging methods, including MRI, SPECT, and ultrasonography may also be used, particularly in patients who are stress-responsive, e.g. functional dyspepsia patients, as a non-invasive and less stress-inducing method is favourable. Ultrasonography satisfies these criteria as it does not by itself distort the physiological response in stress-responsive individuals.

The General Design and Technology Innovations of CAP1400

A historical review of in-vessel melt retention （IVR） is given, which is a severe accident mitigation mea- sure extensively applied in Generation III pressurized water reactors （PWRs）. The idea of IVR actually originated from the back-fitting of the Generation 11 reactor Loviisa WER-440 in order to cope with the core-melt risk. It was then employed in the new deigns such as Westinghouse APIO00, the Korean APR1400 as well as Chinese advanced PWR designs HPRIO00 and CAP1400. The most influential phe- nomena on the IVR strategy are in-vessel core melt evolution, the heat fluxes imposed on the vessel by the molten core, and the external cooling of the reactor pressure vessel （RPV）. For in-vessel melt evolution, past focus has only been placed on the melt pool convection in the lower plenum of the RPV; however, through our review and analysis, we believe that other in-vessel phenomena, including core degradation and relocation, debris formation, and coolability and melt pool formation, may all contrib- ute to the final state of the melt pool and its thermal loads on the lower head. By looking into previous research on relevant topics, we aim to identify the missing pieces in the picture. Based on the state of the art, we conclude by proposing future research needs.

Application of adaptive fuzzy control technology to pressure control of a pressurizer

A pressurizer is one of important equipment in a pressurized water reactor plant. It is used to maintain the pressure of primary coolant within allowed range because the sharp change of coolant pressure affects the security of reactor, therefor, the study of pressurizer’s pressure control methods is very important. In this paper, an adaptive fuzzy controller is presented for pressure control of a presurizer in a nuclear power plant. The controller can on-line tune fuzzy control rules and parameters by self-learning in the actual control process, which possesses the way of thinking like human to make a decision. The simulation results for a pressurized water reactor plant show that the adaptive fuzzy controller has optimum and intelligent characteristics, which prove the controller is effective.

Low voltage n-type OFET based on double insulators

A top contact n-type organic field-effect transistor with low operating voltage was fabricated by employing Ta2O5/PMMA as the double insulators and PTCDI-Cl2 as the semiconductor active layer. The Ta2O5 layer was prepared by using simple economical anodization technique and the PMMA layer was prepared by using the spin-coating method. Compared with the OFET with single Ta2O5 insulator, the device with double insulators shows obviously better electrical performance. It has a field effect electron mobility of 0.063 cm^2/Vs, an on/off ratio of 1.7 × 10^4 and a threshold voltage of 2.3 V.

A Controlled Study on Comparing Differences in CT Perfusion Imaging between Rabbits inoculated with VX2 Lung Tumor and Patients with Squamous Cell Carcinoma of the Lung

OBJECTIVE By analysis and evaluation of the perfusion images and perfusion parameters of the rabbits with VX2 lung tumor, the association between the perfusion parameters and tumor angiogenesis of patients with squamous cell carcinoma of the lung has been studied in order to establish a non-invasive and effective way to detect tumor blood supply, which is be able to exhibit hemodynamic data in tumors during cancer treatments. METHODS Fifteen Netherlands rabbits inoculated with VX2 lung tumor （rabbit group） and 25 patients with squamous cell carcinoma of the lung （patient group） received a multi-slice spiral CT perfusion imaging test using the Netherlands PHILIPS Brilliance 16-slice spiral CT and a U.S. MEDRAD binocular highpressure syringe. Image postprocessing was done using the special perfusion software and EBW 4.0 Workstation. Perfusion volume （PV）, peak enhanced increment （PEI）, transit time peak （TTP）, and blood volume （BV） were measured and analyzed. RESULTS In the rabbit group, the values of the PV, PEI, TTP, and BV of the tumor margin were （53.89 ± 13.38） mL/（min.mL）, （45.71 ± 15.52） Hu, （39.29 ± 10.10） sec, and （31.45 ± 18.19） mL/100 g, respectively; these values of the tumor center were （36.57 ± 14.17） mL/（min.mL）, （28.64 ± 11.74） Hu, （39.00 ＋ 9.78） sec, and （19.76 ± 13.95） mL/100 g, respectively; the values of the muscles were （12.45± 4.38） mL/（min.mL）, （10.98 ± 5.03） Hu, （38.86 ± 10.04） sec, and （5.38 ±2.87） mL/100 g, respectively. The values of the relative perfusion volume （RPV）, relative peak enhanced increment （RPEI）, and relative blood volume （RBV） of the tumor margin were 4.38 ± 1.45, 3.96± 1.45, 9.99 ± 11.7, respectively; these values of the tumor center were 2.14 ± 1.08, 1.83±1.45, 4.17 ±3.39, respectively. The values of the PV, PEL BV of the tumor margin vs. the values of the muscles developed t-values, which were 15.028, 10.79, and 5.88, respectively （P ≤ 0.01）, with statistical significance; the values of the PV, PEI, BV of the tumor center vs. the values of the muscles produced t-values, which were 8.67, 7.49, and 4.55, respectively （P 〈 0.01）, with statistical significance. The values of the TTP of the tumor margin vs. TTP values of the muscles, and the TTP values of the tumor center vs. TTP values of the muscles developed t-values, which were 1.7 and 0.806, respectively （P ≥ 0.05）, without statistical significance. In the patient group, the values of the PV, PE, TTP, and BV of the tumor margin were （88.95 ± 30.89） mL/（min.mL）, （61.87 ± 27.31） Hu, （37.72 ± 12.53） sec, and （18.38 ± 7.2） mL/100 g, respectively; these values of the tumor center were （39.77 ± 18.29） mL/（min.mL）, （14.57 ± 8.1） Hu, （35.64 ± 12.41） sec, and （11.22 ± 6.02） mL/100 g, respectively; these values of the muscles were （12.45 ± 6.5） mL/（min.mL）, （6.14 ± 2.66） Hu, （35.68± 12.35） sec, and （2.23 ± 1.11） mL/100 g, respectively. The values of the RPV, RPEI, and RBV of the tumor margin were 8.05 ± 5.04, 8.87 ± 4.32, and 12.16 ± 8.49, respectively; these values of the tumor center were 2.39 ± 1.68, 2.97 ± 2.1, 3.53 ± 2.82, respectively. The values of the PV, PEI, BV of the tumor margin in the patient group vs. the values of the muscles produced t-values, which were 13.8, 10.85, and 12.22, respectively （P 〈 0.01）, with significant differences; these values of the tumor center vs. the values of the muscles developed t-values, which were 9.158, 6.26, 8.654, respectively （P 〈 0.01）, with significant differences. The TTP value of the tumor margin vs. that of the muscles produced t-value, which was 0.371, and the TTP value of the tumor center vs. that of the muscles developed t-value, which was 1 （P 〉 0.05）, without statistical difference. CONCLUSION CT perfusion imaging technics demonstrates directly dynamic changes of blood flow to tumors, which assists in identifying tumor growth and necrosis, therefore, this research provides an evidence-based guidelines for the treatment of human lung squamous cell carcinoma and has far-reaching clinical significance.

Application of fuzzy analytic hierarchy process and neural network in power transformer risk assessment

In operation,risk arising from power transformer faults is of much uncertainty and complicacy.To timely and objectively control the risks,a transformer risk assessment method based on fuzzy analytic hierarchy process(FAHP) and artificial neural network(ANN) from the perspective of accuracy and quickness is proposed.An analytic hierarchy process model for the transformer risk assessment is built by analysis of the risk factors affecting the transformer risk level and the weight relation of each risk factor in transformer risk calculation is analyzed by application of fuzzy consistency judgment matrix;with utilization of adaptive ability and nonlinear mapping ability of the ANN,the risk factors with large weights are used as input of neutral network,and thus intelligent quantitative assessment of transformer risk is realized.The simulation result shows that the proposed method increases the speed and accuracy of the risk assessment and can provide feasible decision basis for the transformer risk management and maintenance decisions.

Technical modifications & management innovations in exporting nuclear reactor projects

As a main channel for the foreign economic cooperation of China nuclear industry,China Zhongyuan Engineering Corporation (CZEC) has been constantly engaged in technical modifications and management innovations in its exporting nuclear reactor projects.In the implementation of heavy water research reactor contract in Algeria,CZEC had established a complete and adequate design standards system in compliance with the international standards,and made significant modifications to the reference reactor in the aspects of reactor power and reactor safety,solved quite some technical issues which affected the reactor technical performance.The modifications and improvements enabled the technical parameters,safety features,reactor multipurpose application to attain to the advanced level in the world.In the 300 MWe PWR NPPs in Pakistan,safety features had been updated in line with upgrading regulatory requisites.The design philosophy and technology application demonstrated CZEC's creation and innovation on basis of constant safety enhancement of nuclear power projects.Efforts had also been made by CZEC in promoting China made equipment items and components exportation.

Acceleration sensing based on piezoresistive effect of carbon nanotube films

Based on piezoresistive effect, the acceleration sensitivity of multi-walled canbon nanotube (MWNT) films was investigated. A three-point bending technique was presented to measure the piezoresistivity, which used a bending stress applied to the samples while making MWNT films wheeling with a rotational machine. The experimental results showed that the fractional increase in resistance increases linearly versus the increase of centripetal acceleration, and there is a linear relationship between the acceleration and the strain. These shed light on using carbon nanotube films as acceleration sensors for many potential applications.

High Voltage High Frequency Power Transformer for Pulsed Power Applications

This paper presents a new topology for a High Voltage （HV） 50 kV, High Frequency （HF） 20 kHz, multi-cored transformer suitable for use in pulsed power application systems. The main requirements are： high voltage capability, small size and weight. The HV, HF transformer is the main critical block of a high frequency power converter system. The transformer must have high electrical efficiency and in the proposed approach has to be optimized by the number of the cores. The transformer concept has been investigated analytically and through software simulations and experiments. This paper introduces the transformer topology and discusses the design procedure. Experimental measurements to predict core losses are also presented. The losses of epoxy coated nanocrystalline are compared to the losses in a new uncoated core.

Review on development progress of automatic manual transmissions control

In recent years, the sustainable development of automatic manual transmissions (AMTs) control in vehicles is conspicuous. The control applications have grown fast and steadily due to the tremendous progress in power electronics components and the control software that enhance the requirements for delivering higher vehicles performance. AMTs control strategies achieve a reduction in the driveline dynamic oscillations behavior during gear shifting and clutch starting up processes. AMTs future expectations are an increase of torque capacity, more speed ratios and the development of advanced and efficient electronic control systems. This paper concerns with the progressing view of AMTs in the past, today and future, gives an overview of the potential dynamic problems concerned with AMTs and some control strategies used to solve those problems.

Theoretical Investigation on Internal Leakage and Its Effect on the Efficiency of Fluid Switcher-Energy Recovery Device for Reverse Osmosis Desalting Plant

This work is focused on the theoretical investigation of internal leakage of a newly developed pi lotscale fluid switcherenergy recovery device （FSERD） for reverse osmosis （RO） system. For the purpose of in creasing FSERD efficiency and reducing the operating cost of RO, it is required to control the internal leakage in a low level. In this work, the internal leakage rates at different leakage gaps and retentate brine pressures are investigated by computational fluid dynamics （CFD） method and validating experiments. It is found that the internal leak age has a linear relationship with the retentate brine pressure and a polynomial relationship with the scale of leakage gap. The results of the present work imply that low internal leakage and high retentate brine pressure bring benefits to achieve high FSRD efficiency.

Seismic Isolation of Reactor Assembly for a Fixed Base Accelerator Driven System Reactor Building

In the SILER （Seismic-Initiated events risk mitigation in LEad-cooled Reactors） Project, it is interesting to apply seismic isolation technology for the reactor assembly of the fixed base reactor building for ADS （Acceleration Driven System） heavy liquid reactor MYRRHA （Multipurpose Hybrid Research Reactor for High-Tech Application） which contains the most critical safety related components, such as reactor vessel, safe shutdown and control rod mechanisms, primary heat exchangers, primary pumps, spoliation target assembly and fuel assemblies, etc. The purpose of this paper is to investigate the possibility of an application of a partial seismic isolation to the safety critical components only, here, the reactor assembly. This paper presents the preliminary analysis results of the isolated reactor assembly and compares these with those of seismic isolated ADS reactor building. The analysis results show the reduction of the seismic acceleration response but the increase of the relative displacement for the reactor assembly. Some safety issues, especially, coolant＇s incapable covering the reactor core make difficult to apply for the partial seismic isolation of the ADS reactor assembly due to large relative displacement occurring the partial isolation system. Further study on the partial seismic isolation application of the critical safety components are also discussed.

Gas-Liquid Mass Transfer in a Slurry Bubble Column Reactor under High Temperature and High Pressure

The gas-liquid mass transfer of H2 and CO in a high temperature and high-pressure three-phase slurry bubble column reactor is studied. The gas-liquid volumetric mass transfer coefficients kLa are obtained by measuring the dissolution rate of H2 and CO. The influences of the main operation conditions, such as temperature, pressure, superficial gas velocity and solid concentration, are studied systematically. Two empirical correlations are proposed to predict kLa values for H2 and CO in liquid paraffin/solid particles slurry bubble column reactors.