Materials with the same elastic modulus E and representative stress and strain （σr,εr） present similar indentation-loading curves, whatever the value of strain hardening exponent n. Based on this definition, a goo...Materials with the same elastic modulus E and representative stress and strain （σr,εr） present similar indentation-loading curves, whatever the value of strain hardening exponent n. Based on this definition, a good approach was proposed to extract the plastic properties or constitutive equations of metals from nanoindentation test combining finite element simulation. Firstly, without consideration of strain hardening, the representative stress was determined by varying assumed representative stress over a wide range until a good agreement was reached between the computed and experimental loading curves. Similarly, the corresponding representative strain was determined with different hypothetical values of strain hardening exponent in the range of 0-0.6. Through modulating assumed strain hardening exponent values to make the computed unloading curve coincide with that of the experiment, the real strain hardening exponent was acquired. Once the strain hardening exponent was determined, the initial yield stress ay of metals could be obtained by the power law constitution. The validity of the proposed methodology was verified by three real metals： AISI 304 steel, Fe andA1 alloy.展开更多
Particle breakage has a significant influence on the stress-strain and strength behavior of rockfill material.A breakage critical state theory(BCST)was proposed to describe the evolution of particle breakage.The break...Particle breakage has a significant influence on the stress-strain and strength behavior of rockfill material.A breakage critical state theory(BCST)was proposed to describe the evolution of particle breakage.The breakage critical state line in the breakage critical state theory was correlated with the breakage factor,which was fundamentally different from that of the original critical state theory.A simple elastoplastic constitutive model was developed for rockfill in the frame of BCST.An associated flow rule was adopted in this model.Isotropic,contractive and distortional hardening rules were suggested in view of the particle breakage.It was observed that the proposed model could well represent the complex deformation behaviors of rockfill material,such as the strain hardening,post-peak strain softening,volumetric contraction,volumetric expansion,and particle breakage under different initial confining pressures.展开更多
基金Project （51171125） supported by the National Natural Science Foundation of China Project （20110321051 ） supported by the Science and Technology Key Project of Shanxi Province, China
文摘Materials with the same elastic modulus E and representative stress and strain （σr,εr） present similar indentation-loading curves, whatever the value of strain hardening exponent n. Based on this definition, a good approach was proposed to extract the plastic properties or constitutive equations of metals from nanoindentation test combining finite element simulation. Firstly, without consideration of strain hardening, the representative stress was determined by varying assumed representative stress over a wide range until a good agreement was reached between the computed and experimental loading curves. Similarly, the corresponding representative strain was determined with different hypothetical values of strain hardening exponent in the range of 0-0.6. Through modulating assumed strain hardening exponent values to make the computed unloading curve coincide with that of the experiment, the real strain hardening exponent was acquired. Once the strain hardening exponent was determined, the initial yield stress ay of metals could be obtained by the power law constitution. The validity of the proposed methodology was verified by three real metals： AISI 304 steel, Fe andA1 alloy.
基金supported by the Fundamental Research Funds for the Central Universities(Grant No.106112015CDJXY200008)China Scholarship Council(Grant No.201306710022)
文摘Particle breakage has a significant influence on the stress-strain and strength behavior of rockfill material.A breakage critical state theory(BCST)was proposed to describe the evolution of particle breakage.The breakage critical state line in the breakage critical state theory was correlated with the breakage factor,which was fundamentally different from that of the original critical state theory.A simple elastoplastic constitutive model was developed for rockfill in the frame of BCST.An associated flow rule was adopted in this model.Isotropic,contractive and distortional hardening rules were suggested in view of the particle breakage.It was observed that the proposed model could well represent the complex deformation behaviors of rockfill material,such as the strain hardening,post-peak strain softening,volumetric contraction,volumetric expansion,and particle breakage under different initial confining pressures.
