应合与变转:李维桢诗学旨义的二重面向

作为明代后七子的新生代成员,李维桢将汉魏、唐代以及明代诗歌树为承继《诗经》传统的三大高峰,显示对诗歌史的明晰勾画与定位,这与他的派别身份和同情七子派而凸显其在有明诗坛历史作用的立场相绾结。但这种诗歌史的勾勒,并不能完全代表李维桢面向不同历史时期诗歌品格所做的审察,包括涉及具体的宗尚目标,情形显得相对复杂,这彰显了他与七子派诸子诗学观念的共识与分异。同时,这种共识与分异又体现在他对于如何合理利用古典资源问题的诠释。除了维护学古习法的正当性或合理性外,又面对诸子从事的复古实践及其发生的负面影响,激发富于针对性和经验性的防范意识,突出了在利用古典资源关键问题上的自我认知。

低技建造背景下的“葡萄架”到“亭”之变迁

通过将两个“葡萄架”改造为“亭”的设计与建造实践,依日常生活需求和行为方式提出设计意象,以低技建造的方式将屋顶、披檐、栈道、飘台、凸窗等构件“应合”于“葡萄架”,使其获得“亭”的意义,形成符合诗意栖居的意义整体。低技建造未必追求建造工艺的精确性,而是建造目的的精确性。

Modeling and characterization on electroplastic effect during dynamic deformation of 5182-O aluminum alloy

The coupling effects of electrical pulse,temperature,strain rate,and strain on the flow behavior and plasticity of 5182-O aluminum alloy were investigated and characterized.The isothermal tensile test and electrically-assisted isothermal tensile test were performed at the same temperature,and three typical models were further embedded in ABAQUS/Explicit for numerical simulation to illustrate the electroplastic effect.The results show that electric pulse reduces the deformation resistance but enhances the elongation greatly.The calibration accuracy of the proposed modified Lim−Huh model for highly nonlinear and coupled dynamic hardening behavior is not much improved compared to the modified Kocks−Mecking model.Moreover,the artificial neural network model is very suitable to describe the macromechenical response of materials under the coupling effect of different variables.

A Dual Source Power Based EV Wireless Charging System

Recently,there has been a huge increase in the usage of fuel resources for automobiles which is severely affecting the climate and causing global warming.The use of electric vehicle(EV)is an effective way to protect the environment and reduce travel costs.However,the EV charging system has a single charging source,and the charging rate is limited.In this paper,an EV wireless charging system based on dual source power supply has been developed.It realizes intelligent switching between 12 V photovoltaic output and 220 V AC dual source power,and has wireless transmission function.Based on the proposed power supply architecture,the micro wireless charging model is built,which enables the EV model to store power and realize static and mobile control through the wireless induction charging system.

Performance of water-coupled charge blasting under different in-situ stresses

Water-coupled charge blasting is a promising technique to efficiently break rock masses.In this study,numerical models of double boreholes with water-coupled charge are established using LS-DYNA and are calibrated by the tests of rock masses subjected to explosion loads to examine its performance.The crack levels of rock mass induced by water-coupled charge blasting and air-coupled charge blasting are first compared.It is found that water-coupled charge blasting is more appropriate to fracture deep rock mass than air-coupled charge blasting.In addition,the effects of rock properties,water-coupled charge coefficients,and borehole connection angles on the performance of water-coupled charge blasting are investigated.The results show that rock properties and water-coupled charge coefficients can greatly influence the crack and fragmentation levels of rock mass induced by water-coupled charge blasting under uniform and non-uniform in-situ stresses.However,changing borehole-connection angles can only affect crack and fragmentation levels of rock mass under non-uniform in-situ stresses but barely affect those under uniform in-situ stresses.A formula is finally proposed by considering the above-mentioned factors to provide the design suggestion of water-coupled charge blasting to fracture rock mass with different in-situ stresses.

Syntheses,crystal structures,and catalytic properties of three zinc(Ⅱ),cobalt(Ⅱ)and nickel(Ⅱ)coordination polymers constructed from 5⁃(4⁃carboxyphenoxy)nicotinic acid

Three zinc(Ⅱ),cobalt(Ⅱ),and nickel(Ⅱ)coordination polymers,namely[Zn(μ^(3-)cpna)(μ-dpea)_(0.5)]_(n)(1),[Co(μ^(3-)cpna)(μ-dpey)_(0.5)]_(n)(2),and[Ni(μ^(3-)cpna)(μ-dpey)_(0.5)(H_(2)O)]_(n)(3),have been constructed hydrothermally using H_(2)cpna(5-(4-carboxyphenoxy)nicotinic acid),dpea(1,2-di(4-pyridyl)ethane),dpey(1,2-di(4-pyridyl)ethylene),and zinc,cobalt,and nickel chlorides at 160℃.The products were isolated as stable crystalline solids and were characterized by IR spectra,elemental analyses,thermogravimetric analyses,and single-crystal X-ray diffraction analyses.Single-crystal X-ray diffraction analyses revealed that three compounds crystallize in the triclinic system,space group P1.Compounds 1-3 show 2D layer structures.The catalytic activities in the Knoevenagel condensation reaction of these compounds were investigated.Compounds 1 and 2 exhibit effective catalytic activities in the Knoevenagel condensa-tion reaction at room temperature.For this reaction,various parameters were optimized,followed by the investiga-tion of the substrate scope.CCDC:2335676,1;2335677,2;2335678,3.

Responses of soil enzyme and microbial community under co-loading of different microplastics and sulfamethoxazole

Polyamide/polyethylene(PA/PE)microplastics were injected into soil containing sulfamethoxazole(SMX)to investigate their combined effects on SMX removal,soil enzyme activity,and microbial communities.The results show that both PA and PE transiently increase SMX removal and inhibite the stimulation of microbial species diversity by SMX.The effect of PE is more significant.Meanwhile,PE combined with SMX increases the relative abundances of Actinobacteria and Pseudomonas,while PA combined with SMX decreases the relative abundances of Nocardioides and Streptomyces.In addition,PA/PE combined with SMX can increase dehydrogenase,urease,ammonia monooxygenase,and nitrate reductase activities in the soil while inhibiting the activity of laccase.Compared with PA combined with SMX,the activities of dehydrogenase,urease,ammonia monooxygenase,and laccase of PE combined with SMX increase by 9.82%,10.41%,8.07%,and 5.47%,while the activities of nitrate reductase and neutral phosphatase decrease by 1.47%and 6.78%.

Hydrogen production performance of the non⁃platinum⁃based MoS_(2)/CuS cathode in microbial electrolytic cells

MoS_(2)/CuS composite catalysts were successfully synthesized using a one-step hydrothermal method with sodium molybdate dihydrate,thiourea,oxalic acid,and copper nitrate trihydrate as raw materials.The hydrogen pro-duction performance of MoS_(2)/CuS prepared with different molar ratios of Mo to Cu precursors(n_(Mo)∶n_(Cu))as cathodic catalysts was investigated in the two-chamber microbial electrolytic cell(MEC).X-ray diffraction(XRD),X-ray pho-toelectron spectroscopy(XPS),scanning electron microscopy(SEM),transmission electron microscope(TEM),linear scanning voltammetry(LSV),electrochemical impedance analysis(EIS),and cyclic voltammetry(CV)were used to characterize the synthesized catalysts for testing and analyzing the hydrogen-producing performance.The results showed that the hydrogen evolution performance of MoS_(2)/CuS-20%(nMo∶nCu=5∶1)was better than that of platinum(Pt)mesh,and the hydrogen production rate of MoS_(2)/CuS-20%as a cathode in MEC was(0.2031±0.0237)m^(3)_(H_(2))·m^(-3)·d^(-1) for 72 h at an applied voltage of 0.8 V,which was slightly higher than that of Pt mesh of(0.1886±0.0134)m^(3)_(H_(2))·m^(-3)·d^(-1).The addition of a certain amount of CuS not only regulates the electron transfer ability of MoS_(2) but also increases the density of active sites.

Effect of quenching cooling rate on residual stress and microstructure evolution of 6061 aluminum alloy

In this study,the cooling rate was manipulated by quenching with water of different temperatures(30,60 and 100℃).Surface and internal residual stresses in the quenched 6061 aluminum alloy samples were measured using hole-drilling and crack compliance methods,respectively.Then,the processability of the quenched samples was evaluated at cryogenic temperatures.The mechanical properties of the as-aged samples were assessed,and microstructure evolution was analyzed.The surface residual stresses of samples W30℃,W60℃and W100℃is−178.7,−161.7 and−117.2 MPa,respectively along x-direction,respectively;and−191.2,−172.1 and−126.2 MPa,respectively along y-direction.The sample quenched in boiling water displaying the lowest residual stress(~34%and~60%reduction in the surface and core).The generation and distribution of quenching residual stress could be attributed to the lattice distortion gradient.Desirable plasticity was also exhibited in the samples with relatively low quenching cooling rates at cryogenic temperatures.The strengthes of the as-aged samples are 291.2 to 270.1 MPa as the quenching water temperature increase from 30℃to 100℃.Fine and homogeneous β"phases were observed in the as-aged sample quenched with boiling water due to the clusters and Guinier-Preston zones(GP zones)premature precipitated during quenching process.

The Lone Pair Electrons in Post-Transition Metal and Their Contribution to Optical Response

The stereochemically active lone pairs around post-transition metal atoms play an important role in determining distorted lattice structure and optical response.The lone pair electrons are characterized by crystal orbitals,electron localization function(ELF)and partial density of states(PDOS).Birefringence is evaluated by means of a Born effective charge approach based on modern polarization theory.The origin of the different responses of birefringence and second-harmonic generation(SHG)is explored,as well as the effect of spin-orbit coupling(SOC)on the band structure and optical properties is explored.The study of this paper can help to deeply understand the lone pairs and their contribution to optical property.

Microstructure and ablation behavior of Zr-based ultra-high-temperature gradient composites

To obtain high-performance Zr-based ultra-high-temperature composites,Zr-based ultra-high-temperature gradient composites were prepared by changing the laying method of the infiltrant via reactive melt infiltration.The effects of different infiltrant laying methods on the microstructure and ablative properties of Zr-based ultrahigh-temperature gradient composites were investigated.The results showed that the gradient structure of the Zr-based ultrahigh-temperature gradient composites differed when the composition ratio of the infiltrant was changed.When the thicknesses of the Zr/Mo/Si layers were 6/4/12 mm and 8/2/12 mm,the SiMoZrC solid solution content in the samples increased and decreased along the infiltration direction,respectively.The gradient samples were ablated in an oxyacetylene flame at 3000°C for 40 s.The ablation resistance of the sample was the highest when the infiltrant was a powder and the thickness of the Zr/Mo/Si layer was 6/4/12 mm.

试论50～70年代主流小说“革命的古典主义特征”

50～70年代的小说创作贯穿着两个基本原则：一是社会主义现实主义,1958年后是“两结合”。无论是社会主义现实主义还是“两结合”实际上都是新古典主义的中国形式。这一时期主流小说的古典主义特征突出地表现为“革命的古典主义”,带有浓厚的革命色彩。本文主要从50～70年代的文学环境和主流小说的创作实践入手,阐明这一时期主流小说“顺应政治意识形态、崇尚理性、规约性强”的古典主义色彩以及“革命的古典主义”特征。

Effect of NiAl content on phases and microstructures of TiC-TiB_2-NiAl composites fabricated by reaction synthesis

TiC-TiB2-NiAl composites were fabricated by self-propagating high temperature reaction synthesis（SHS） with Ti, B4C, Ni and Al powders as raw materials. The effects of NiAl content on phase constituents and microstructures were investigated. The results show that the reaction products are composed of TiB2, TiC and NiAl. The content of NiAl increases with the adding of Ni＋Al in green compacts. TiB2, TiC and NiAl grains present in different shapes in the matrix, TiB2 being in hexagonal or rectangular shapes, TiC in spherical shapes, and NiAl squeezed into the gaps of TiC and TiB2 grains. With the increase of NiAl content, the grains of TiC-TiB2-NiAl composites are refined, their density and compressive strength are improved, and the shapes of TiC grains become spherical instead of irregular ones. Finally, the fracture mechanism of the composites transforms from intergranular fracture mode to the compounded fracture mode of intergranular fracture and transgranular fracture.

Extraction of cable forces due to dead load in cable-stayed bridges under random vehicle loads

To extract the cable forces due to dead load in cable-stayed bridges from the monitoring data,the effects of various factors are eliminated step by step by different statistical methods.The information of cable tension sensors recorded by the health monitoring system of Nanjing No.3 Yangtze River Bridge is taken as an example. Temperature effects are eliminated by linear fitting analysis;a 5-level wavelet de-noising method is applied to eliminate the noise signal by the wavelet basis function of DB8.The rest cable force data is tested by the method of extreme-value type-Ⅲ distribution, and the fitted location parameter is selected as the cable force due to dead load.The results show that the cable force has a linear relationship with temperature. Sometimes, the temperature effect is significant.Noise effect accounts for a small percentage,and the vehicle loads effect has twice the temperature effect on the traffic volume in 2007. The calculation results of other stay cables verify the reliability and validity of the proposed method.

Finite element analysis of strain distribution in ZK60 Mg alloy during cyclic extrusion and compression

Finite element method was used to study the strain distribution in ZK60 Mg alloy during multi-pass cyclic extrusion and compression （CEC）. In order to optimize the CEC processing, the effects of friction condition and die geometry on the distribution of total equivalent plastic strain were investigated. The results show that the strain distributions in the workpieces are inhomogeneous after CEC deformation. The strains of the both ends of the workpieces are lower than that of the center region. The process parameters have significant effects on the strain distribution. The friction between die and workpiece is detrimental to strain homogeneity, thus the friction should be decreased. In order to improve the strain homogeneity, a large corner radius and a low extrusion angle should be used.

Review on corrosion-wear resistance performance of materials in molten aluminum and its alloys

The failure caused by the corrosion-wear of molten aluminum and its alloys is one of the main problems in aluminum industry. In this work, the resistance behavior of various materials, including Fe-based alloys, ceramics and corresponding high apparatus of corrosion-wear in molten aluminum and its alloys, were reviewed. The synergistic effect of corrosion and wear was discussed based on corrosion and wear mechanics. The effects of dynamic agitation due to rotating of friction pairs, physical property of liquid metal and size of grain etc., on the corrosion-wear resistance performance were investigated. In addition, the characteristics of corrosion-wear resistance performance of materials in molten aluminum and its alloy were summarized. According to our recent progress referred to kinds of materials, especially a TiA13/Ti3A1C2/A1203 composite, the ceramics/metal composites with a co-continuous structure will be of great advantage in the field of corrosion-wear environment of molten aluminum and its alloys.

Heterosis Analysis and Utilization of Agronomic Traits of Rice Male Sterile Line Jiazhe 91A

[Objective]Provide a theoretical basis for the popularization and application of Jiazhe 91A through the research and analysis on the advantages and characteristics of F1 generation of Jiazhe 91A combinations. [Method]The mid-parent heterosis,heterobeltiosis,competitive advantage and average dominance of the F1 generation of the three combinations configured by Jiazhe 91A were analyzed by the comparison and appraisal test of combinations configured by Jiazhe 91A. [Result]the panicle shape of the F1 generation of the three combinations configured by Jiazhe 91A was larger,and the panicles number was greater than its parents,the growing period was shorter than that of Shanyou 63,while the spikelets per panicle,seed setting rate and yield were higher than the control Shanyou 63,and the yield was 2.7% to 12.1% higher than Shanyou 63. [Conclusion]The sterility of Jiazhe 91A sterility was stable,and had a strong restoring ability,so it had widespread application prospects.

Influence of strain rate on microstructure and formability of AZ31B magnesium alloy sheets

The effects of strain rate on microstructure and formability of AZ31B magnesium alloy sheets were investigated through uniaxial tensile tests and hemispherical punch tests with strain rates of 10^-4, 10^-3, 10^-2, 10^-1 s^-1 at 200℃. The results show that the volume fraction of dynamic recrystallization grains increases and the original grains are gradually replaced by recrystallization grains with the strain rate decreasing. A larger elongation and a smaller r-value are obtained at a lower strain rate, moreover the erichsen values become larger with the strain rate reducing, so the formability improves. This problem arises in part from the enhanced softening and the coordination of recrystallization grains during deformation.

Trust and relationship commitment on cooperative performance of supply chain

Creating and sustaining trust in cooperative performances of the supply chain constitute critical strategic components.To study the influences of organizational and individual trust on the quality of commitment and cooperative performance,the relationships among organizational trust,individual trust,commitment and cooperative performances of the supply chain are discussed by case analysis.Questionnaire investigation is used to study the trust and relationship commitment among supply chain partnerships on cooperative performance.Results show that both organizational and individual trust are positively correlated with cooperative performance.The indirect effects of organizational trust on cooperative performance through relationship commitment is significantly greater than its direct effects.However,the indirect effects of individual trust on cooperative performance through relationship commitment is significantly less than its direct effects.It provides all essential basis for enterprises to establish and develop stable supply chain partnerships and to enhance competitive advantages.

Microwave direct synthesis and thermoelectric properties of Mg_(2)Si by solid-state reaction

In order to reduce the oxidation and volatilization caused by Mg element in the traditional methods for synthesizing Mg2Si compounds,Mg2Si thermoelectric materials were prepared by solid state reaction and microwave radiation techniques.Structure and phase composition of the materials were investigated by X-ray diffraction.The electrical conductivity,Seebeck coefficient and thermal conductivity were measured as a function of temperature from 300 to 700 K.It is found that high purity Mg2Si powders can be obtained with excessive content of 8% Mg from the stoichiometric Mg2Si at 853 K and 2.5 kW for 30 min.A maximum dimensionless figure of merit,ZT,of about 0.13 was obtained for Mg2Si at 600 K.