By using LS-DYNA simulation software,the influences of some structure parameters,such as top cone angle,wall thickness,liner height and height ratio of top cone,of double-angle liner on the jet formation were studied ...By using LS-DYNA simulation software,the influences of some structure parameters,such as top cone angle,wall thickness,liner height and height ratio of top cone,of double-angle liner on the jet formation were studied respectively.Their influences on jet tip velocity,tail velocity and penetration depth were revealed.The simulation results show that the formation is better if the top cone angle is selected as 28°,the wall is 2.6mm,the liner height is 140mm,and the height ratio of top cone is 60%.In large stand-off distance,the jet has a higher tip velocity,and the tip does not break.With the stand-off distance of 8 times of the charge diameter,the experiment penetrating steel target was carried out.The experiment and simulation results are in good agreement.展开更多
For shaped charges,LS-DYNA software was adopted to explore the influence of number of initiation points on the penetrator formation numerically.Changed the number of initiation points from 4 to 36,the performance of p...For shaped charges,LS-DYNA software was adopted to explore the influence of number of initiation points on the penetrator formation numerically.Changed the number of initiation points from 4 to 36,the performance of penetrator under four different kinds of typical charge diameter was analyzed,and the effect of detonation wave pressure on the liner was discussed.The minimum number of initiation points to substitute for annular initiation was obtained for each of four warheads with different charge diameters,and the curve representing the relation between the number of initiation points and charge diameter was found out also by using polynomial fitting.The simulation result provides a reference for the design of multimode warhead.展开更多
文摘By using LS-DYNA simulation software,the influences of some structure parameters,such as top cone angle,wall thickness,liner height and height ratio of top cone,of double-angle liner on the jet formation were studied respectively.Their influences on jet tip velocity,tail velocity and penetration depth were revealed.The simulation results show that the formation is better if the top cone angle is selected as 28°,the wall is 2.6mm,the liner height is 140mm,and the height ratio of top cone is 60%.In large stand-off distance,the jet has a higher tip velocity,and the tip does not break.With the stand-off distance of 8 times of the charge diameter,the experiment penetrating steel target was carried out.The experiment and simulation results are in good agreement.
文摘For shaped charges,LS-DYNA software was adopted to explore the influence of number of initiation points on the penetrator formation numerically.Changed the number of initiation points from 4 to 36,the performance of penetrator under four different kinds of typical charge diameter was analyzed,and the effect of detonation wave pressure on the liner was discussed.The minimum number of initiation points to substitute for annular initiation was obtained for each of four warheads with different charge diameters,and the curve representing the relation between the number of initiation points and charge diameter was found out also by using polynomial fitting.The simulation result provides a reference for the design of multimode warhead.
