For the battery only power system is hard to meet the energy and power requirements reasonably, a hybrid power system with uhracapacitor and battery is studied. A Topology structure is analyzed that the uhracapacitor ...For the battery only power system is hard to meet the energy and power requirements reasonably, a hybrid power system with uhracapacitor and battery is studied. A Topology structure is analyzed that the uhracapacitor system is connected with battery pack parallel after a bidirectional DC/DC converter. The ultracapacitor, battery and the hybrid power system are modeled. For the plug-in hybrid electric vehicle （PHEV） application, the control target and control strategy of the hybrid power system are put forward. From the simulation results based on the Chinese urban driving cycle, the hybrid power system could meet the peak power requirements reasonably while the battery pack＇ s current is controlled in a reasonable limit which will be helpful to optimize the battery pack＇ s working conditions to get long cycling life and high efficiency.展开更多
This paper presents a comprehensive overview of the different requirements for applications of solar cells in the built environment, particularly for the MENA （Middle East and North Africa） region. The authors empha...This paper presents a comprehensive overview of the different requirements for applications of solar cells in the built environment, particularly for the MENA （Middle East and North Africa） region. The authors emphasize the assessment of parameters additional to the cost and efficiency of the cells to make a more informed choice of the PV technology to use in specific buildings. They also emphasize the need for the wide use ofphotovoltaics in the built environment to produce electricity in the GCC （Gulf Cooperation Council） region and briefly mention the efforts being made in this regard.展开更多
Windbelt generators have been proposed as small, green power sources for battery charging applications. Some of the reported results lack detailed information about how key parameters influence the output power of the...Windbelt generators have been proposed as small, green power sources for battery charging applications. Some of the reported results lack detailed information about how key parameters influence the output power of the generator. In this work, we built prototypes with different architectures to study the voltage generation and power delivery as functions of belt tension, length, and electrical load at various wind speeds. We also studied the maximum power delivery conditions before the breakdown of the belt oscillation occurs. Our results are obtained from windbelt generators with two types of architectures： a conventional design with an adjustable belt that uses weight for tension control, and a revised design with a belt oscillation perpendicular to the coil axis. We have concluded that the breakdown of the belt oscillation at lower output resistances is a primary bottleneck that will limit windbelt systems to only very low power applications.展开更多
Polymer light-emitting electrochemical cells (PLECs) employ a thin layer of a luminescent conjugated polymer admixed with an ionic source and an ionic conductor for the in-situ formation of p-i-n junction and subseque...Polymer light-emitting electrochemical cells (PLECs) employ a thin layer of a luminescent conjugated polymer admixed with an ionic source and an ionic conductor for the in-situ formation of p-i-n junction and subsequent efficient injections of both electrons and holes.The junction formation enables the use of air-stable conductors as the cathode and a relatively thick emissive polymer layer that is more compatible with low-cost solution-based processes.This paper overviews the operation mechanism of the PLECs,the properties and drawbacks of the devices.The employment of crosslinkable ionic conductors to stabilize the p-i-n junction is reviewed.The resulting static junction electroluminesces light at high brightness,high efficiency,and prolonged lifetime.Silver paste and carbon nanotubes can be used as the cathode,thus,PLECs were fabricated by lamination.Using single wall carbon nanotubes coated elastic substrate as both anode and cathode,the PLECs can be made highly stretchable.展开更多
文摘For the battery only power system is hard to meet the energy and power requirements reasonably, a hybrid power system with uhracapacitor and battery is studied. A Topology structure is analyzed that the uhracapacitor system is connected with battery pack parallel after a bidirectional DC/DC converter. The ultracapacitor, battery and the hybrid power system are modeled. For the plug-in hybrid electric vehicle （PHEV） application, the control target and control strategy of the hybrid power system are put forward. From the simulation results based on the Chinese urban driving cycle, the hybrid power system could meet the peak power requirements reasonably while the battery pack＇ s current is controlled in a reasonable limit which will be helpful to optimize the battery pack＇ s working conditions to get long cycling life and high efficiency.
文摘This paper presents a comprehensive overview of the different requirements for applications of solar cells in the built environment, particularly for the MENA （Middle East and North Africa） region. The authors emphasize the assessment of parameters additional to the cost and efficiency of the cells to make a more informed choice of the PV technology to use in specific buildings. They also emphasize the need for the wide use ofphotovoltaics in the built environment to produce electricity in the GCC （Gulf Cooperation Council） region and briefly mention the efforts being made in this regard.
文摘Windbelt generators have been proposed as small, green power sources for battery charging applications. Some of the reported results lack detailed information about how key parameters influence the output power of the generator. In this work, we built prototypes with different architectures to study the voltage generation and power delivery as functions of belt tension, length, and electrical load at various wind speeds. We also studied the maximum power delivery conditions before the breakdown of the belt oscillation occurs. Our results are obtained from windbelt generators with two types of architectures： a conventional design with an adjustable belt that uses weight for tension control, and a revised design with a belt oscillation perpendicular to the coil axis. We have concluded that the breakdown of the belt oscillation at lower output resistances is a primary bottleneck that will limit windbelt systems to only very low power applications.
基金supported by the National Science Foundation (ECCS1028412)
文摘Polymer light-emitting electrochemical cells (PLECs) employ a thin layer of a luminescent conjugated polymer admixed with an ionic source and an ionic conductor for the in-situ formation of p-i-n junction and subsequent efficient injections of both electrons and holes.The junction formation enables the use of air-stable conductors as the cathode and a relatively thick emissive polymer layer that is more compatible with low-cost solution-based processes.This paper overviews the operation mechanism of the PLECs,the properties and drawbacks of the devices.The employment of crosslinkable ionic conductors to stabilize the p-i-n junction is reviewed.The resulting static junction electroluminesces light at high brightness,high efficiency,and prolonged lifetime.Silver paste and carbon nanotubes can be used as the cathode,thus,PLECs were fabricated by lamination.Using single wall carbon nanotubes coated elastic substrate as both anode and cathode,the PLECs can be made highly stretchable.
