The calculation method of sliding ratios for conjugate-curve gear pair, generated based on the theory of conjugate curves,is proposed. The theoretical model of conjugate-curve gear drive is briefly introduced. The gen...The calculation method of sliding ratios for conjugate-curve gear pair, generated based on the theory of conjugate curves,is proposed. The theoretical model of conjugate-curve gear drive is briefly introduced. The general calculation formulas of sliding ratios are developed according to the conjugate curves. The applications to the circular arc gears based on conjugate curves and the novel involute-helix gears are studied. A comparison on the sliding coefficient with the conventional corresponding gear drive is also carried out. The influences of gear parameters such as spiral parameter, gear ratio and modulus on the sliding ratios of gear drive are discussed. Brief description of manufacturing method for conjugate-curve gear pair is given. The research results show that the sliding ratios of gear pair become smaller with the increase of spiral parameter and gear ratio, respectively. And it will be greater with the increase of modulus for the tooth profiles. The meshing characteristics of conjugate-curve gears are further reflected and the optimization design of tooth profiles with high performance may be obtained.展开更多
Work study is an area of construction production rationalization in which with scientific, logical, holistic and system analysis methods of the process we gain optimum in way of work and time of work. Chronometry meth...Work study is an area of construction production rationalization in which with scientific, logical, holistic and system analysis methods of the process we gain optimum in way of work and time of work. Chronometry method is one of the work study methods which is appropriate for recording shorter cyclic processes and is based on statistical sampling theory. Determination of cyclic times and work performances of standard cyclic construction machines （SCCM） is one of key assumptions of dynamic planning of machine work on every construction site. Calculation methods of SCCM work performances arc one of basic research objects in the field of construction organization and technology. Study shows applied chronometry method in work of standard cyclic construction machine. Goal of this study is to accomplish regulation through measured time cycle and compare measured effects with effects obtained with standard methodology of calculating hydraulic excavator practical achievement for gaining regulation in order to determine main reasons which effect work performance on site.展开更多
Tubular flow reactors are mainly used in chemical industry and waste water discharged units. Control of output variables is very difficult because of the existence of high dead-time in these types of reactors. In the ...Tubular flow reactors are mainly used in chemical industry and waste water discharged units. Control of output variables is very difficult because of the existence of high dead-time in these types of reactors. In the present work, sodium hydroxide and acetic acid solutions were sent to the tubular flow reactor. The aim was to control p H at 7 in the nonlinear region. The p H control of a tubular flow reactor with high time delay and a highly nonlinear behavior in p H neutralization reaction was investigated experimentally in the face of the various load and set point changes. Firstly, efficiency of conventional Proportional-Integral-Derivative(PID) algorithm in the experiments was tested. Then self-tuning PID(STPID) control system was applied by using the ARMAX model. The model parameters were calculated from input–output data by using PRBS signal as disturbance and Bierman algorithm. Lastly, the experimental fuzzy control of p H based on fuzzy model was achieved to compare the success of fuzzy approach with the performance of other control cases studied.展开更多
To further improve the boiler ash ratio detection methods and resource utilization, through image processing technology for boiler ash ratio analysis, the article first studied the one-dimensional Otsu algorithm, and ...To further improve the boiler ash ratio detection methods and resource utilization, through image processing technology for boiler ash ratio analysis, the article first studied the one-dimensional Otsu algorithm, and then for the one-dimensional Otsu algorithm, in order to improve the accuracy of the algorithm, then it puts forward a two-dimensional Otsu algorithm. Finally the two-dimensional Otsu algorithm combined with the one-dimensional Otsu algorithm and the improved Otsu algorithm. By analyzing the improved Otsu algorithm, this paper considers the pixel gray value, neighborhood information, excluding light, noise and the relative efficiency of one-dimensional Otsu algorithm higher accuracy. The relative dimensional Otsu algorithm operating efficiency has been greatly improved. Improved Otsu algorithm in dealing with boiler ash ratio detection has played a very good part in the ecological environment, economic development and some other important aspects.展开更多
基金Project(2013BAF01B04) supported by the National Key Technology R&D Program during the Twelfth Five-year Plan of ChinaProject(51205425) supported by the National Natural Science Foundation of China
文摘The calculation method of sliding ratios for conjugate-curve gear pair, generated based on the theory of conjugate curves,is proposed. The theoretical model of conjugate-curve gear drive is briefly introduced. The general calculation formulas of sliding ratios are developed according to the conjugate curves. The applications to the circular arc gears based on conjugate curves and the novel involute-helix gears are studied. A comparison on the sliding coefficient with the conventional corresponding gear drive is also carried out. The influences of gear parameters such as spiral parameter, gear ratio and modulus on the sliding ratios of gear drive are discussed. Brief description of manufacturing method for conjugate-curve gear pair is given. The research results show that the sliding ratios of gear pair become smaller with the increase of spiral parameter and gear ratio, respectively. And it will be greater with the increase of modulus for the tooth profiles. The meshing characteristics of conjugate-curve gears are further reflected and the optimization design of tooth profiles with high performance may be obtained.
文摘Work study is an area of construction production rationalization in which with scientific, logical, holistic and system analysis methods of the process we gain optimum in way of work and time of work. Chronometry method is one of the work study methods which is appropriate for recording shorter cyclic processes and is based on statistical sampling theory. Determination of cyclic times and work performances of standard cyclic construction machines （SCCM） is one of key assumptions of dynamic planning of machine work on every construction site. Calculation methods of SCCM work performances arc one of basic research objects in the field of construction organization and technology. Study shows applied chronometry method in work of standard cyclic construction machine. Goal of this study is to accomplish regulation through measured time cycle and compare measured effects with effects obtained with standard methodology of calculating hydraulic excavator practical achievement for gaining regulation in order to determine main reasons which effect work performance on site.
文摘Tubular flow reactors are mainly used in chemical industry and waste water discharged units. Control of output variables is very difficult because of the existence of high dead-time in these types of reactors. In the present work, sodium hydroxide and acetic acid solutions were sent to the tubular flow reactor. The aim was to control p H at 7 in the nonlinear region. The p H control of a tubular flow reactor with high time delay and a highly nonlinear behavior in p H neutralization reaction was investigated experimentally in the face of the various load and set point changes. Firstly, efficiency of conventional Proportional-Integral-Derivative(PID) algorithm in the experiments was tested. Then self-tuning PID(STPID) control system was applied by using the ARMAX model. The model parameters were calculated from input–output data by using PRBS signal as disturbance and Bierman algorithm. Lastly, the experimental fuzzy control of p H based on fuzzy model was achieved to compare the success of fuzzy approach with the performance of other control cases studied.
文摘To further improve the boiler ash ratio detection methods and resource utilization, through image processing technology for boiler ash ratio analysis, the article first studied the one-dimensional Otsu algorithm, and then for the one-dimensional Otsu algorithm, in order to improve the accuracy of the algorithm, then it puts forward a two-dimensional Otsu algorithm. Finally the two-dimensional Otsu algorithm combined with the one-dimensional Otsu algorithm and the improved Otsu algorithm. By analyzing the improved Otsu algorithm, this paper considers the pixel gray value, neighborhood information, excluding light, noise and the relative efficiency of one-dimensional Otsu algorithm higher accuracy. The relative dimensional Otsu algorithm operating efficiency has been greatly improved. Improved Otsu algorithm in dealing with boiler ash ratio detection has played a very good part in the ecological environment, economic development and some other important aspects.
