In order to solve the problems of excess ovality and cross-section distortion of longitudinally submerged arc welding pipes after forming,a new three-roller continuous setting round process was proposed.This process c...In order to solve the problems of excess ovality and cross-section distortion of longitudinally submerged arc welding pipes after forming,a new three-roller continuous setting round process was proposed.This process can be divided into three stages:loading stage,roll bending stage and unloading stage.Based on the discretization idea,the mechanical model of the primary statically indeterminate problem of the longitudinally submerged arc welding pipes at the roll bending stage was established,and the deformation response was obtained.The simulation and theoretical results show that there are three positive bending regions and three reverse bending regions along the circumference of the pipe.The loading force of each roller shows growth,stability and downward trend with time.The error between the theoretical fitting curve and the simulated data point is very small,and the simulation results verify the reliability of the theoretical calculation.The experimental results show that the residual ovality decreases with the increase of the reduction,and the reduction of the turning point is the optimum reduction.In addition,the residual ovality of the pipe is less than 0.7%without cross-section distortion,which verifies the feasibility of this process.展开更多
This paper considers a semilinear elliptic equation on a n-dimensional complete noncompact R.iemannian manifold, which is a generalization of the well known Yamabe equation. An existence result is proved.
In order to precisely measure the diameters for obtaining the fineness of rolling raw silk, the physical features of raw silk are analyzed. By means of Fresnel principle, diffractions caused by different transparent r...In order to precisely measure the diameters for obtaining the fineness of rolling raw silk, the physical features of raw silk are analyzed. By means of Fresnel principle, diffractions caused by different transparent raw silk filaments are analyzed and simulated. Image data of raw silk filament measured by digital CMOS camera are analyzed and processed for obtaining the precise diameters of the filamerit with the relative error of less than 1%. On the assumption of appropriate elliptic cross-section of the filament, the cross-section area is calculated as the fineness of the filament. Measurement experiments are carded out. Finally, some suggestions are proposed for photoelectric measuring the fineness of raw silk.展开更多
Anisotropic meshes are known to be well-suited for problems which exhibit anisotropic solution features. Defining an appropriate metric tensor and designing an efficient algorithm for anisotropic mesh gen- eration are...Anisotropic meshes are known to be well-suited for problems which exhibit anisotropic solution features. Defining an appropriate metric tensor and designing an efficient algorithm for anisotropic mesh gen- eration are two important aspects of the anisotropic mesh methodology. In this paper, we are concerned with the natural metric tensor for use in anisotropic mesh generation for anisotropic elliptic problems. We provide an algorithm to generate anisotropic meshes under the given metric tensor. We show that the inverse of the anisotropic diffusion matrix of the anisotropic elliptic problem is a natural metric tensor for the anisotropic mesh generation in three aspects： better discrete algebraic systems, more accurate finite element solution and superconvergence on the mesh nodes. Various numerical examples demonstrating the effectiveness are presented.展开更多
If all prime closed geodesics on(S^n, F) with an irreversible Finsler metric F are irrationally elliptic,there exist either exactly 2 [(n+1)/2] or infinitely many distinct closed geodesics. As an application, we show ...If all prime closed geodesics on(S^n, F) with an irreversible Finsler metric F are irrationally elliptic,there exist either exactly 2 [(n+1)/2] or infinitely many distinct closed geodesics. As an application, we show the existence of three distinct closed geodesics on bumpy Finsler(S^3, F) if any prime closed geodesic has non-zero Morse index.展开更多
This article is devoted to the study of a quasilinear Schrodinger equation coupled with an elliptic equation on the metric g. We first prove that, in this context, the propagation of regularity holds which ensures loc...This article is devoted to the study of a quasilinear Schrodinger equation coupled with an elliptic equation on the metric g. We first prove that, in this context, the propagation of regularity holds which ensures local wellposedness for initial data small enough in H1/2 and belonging to the Besov space B3/2 2,1. In a second step, we establish Strichartz estimates for time dependent rough metrics to obtain a lower bound of the time existence which only involves the B1＋ε 2,∞ norm on the initial data.展开更多
In this paper, we derive W^(1,∞) and piecewise C^(1,α) estimates for solutions, and their t-derivatives, of divergence form parabolic systems with coefficients piecewise H¨older continuous in space variables x ...In this paper, we derive W^(1,∞) and piecewise C^(1,α) estimates for solutions, and their t-derivatives, of divergence form parabolic systems with coefficients piecewise H¨older continuous in space variables x and smooth in t. This is an extension to parabolic systems of results of Li and Nirenberg [Comm Pure Appl Math, 2003, 56:892–925] on elliptic systems. These estimates depend on the shape and the size of the surfaces of discontinuity of the coefficients, but are independent of the distance between these surfaces.展开更多
基金supported by the National Natural Science Foundation of China (Nos. 52005431, 51705449 and 51975509)the Natural Science Foundation of Hebei Province of China (No. E2020203086)the National Major Science and Technology Projects of China (No. 2018ZX04007002)
文摘In order to solve the problems of excess ovality and cross-section distortion of longitudinally submerged arc welding pipes after forming,a new three-roller continuous setting round process was proposed.This process can be divided into three stages:loading stage,roll bending stage and unloading stage.Based on the discretization idea,the mechanical model of the primary statically indeterminate problem of the longitudinally submerged arc welding pipes at the roll bending stage was established,and the deformation response was obtained.The simulation and theoretical results show that there are three positive bending regions and three reverse bending regions along the circumference of the pipe.The loading force of each roller shows growth,stability and downward trend with time.The error between the theoretical fitting curve and the simulated data point is very small,and the simulation results verify the reliability of the theoretical calculation.The experimental results show that the residual ovality decreases with the increase of the reduction,and the reduction of the turning point is the optimum reduction.In addition,the residual ovality of the pipe is less than 0.7%without cross-section distortion,which verifies the feasibility of this process.
文摘This paper considers a semilinear elliptic equation on a n-dimensional complete noncompact R.iemannian manifold, which is a generalization of the well known Yamabe equation. An existence result is proved.
文摘In order to precisely measure the diameters for obtaining the fineness of rolling raw silk, the physical features of raw silk are analyzed. By means of Fresnel principle, diffractions caused by different transparent raw silk filaments are analyzed and simulated. Image data of raw silk filament measured by digital CMOS camera are analyzed and processed for obtaining the precise diameters of the filamerit with the relative error of less than 1%. On the assumption of appropriate elliptic cross-section of the filament, the cross-section area is calculated as the fineness of the filament. Measurement experiments are carded out. Finally, some suggestions are proposed for photoelectric measuring the fineness of raw silk.
基金supported by National Natural Science Foundation of China(Grant Nos.11031006 and 11201397)Program for Changjiang Scholars and Innovative Research Team in University(Grant No.IRT1179)+2 种基金International Science and Technology Cooperation Program of China(Grant No.2010DFR00700)Hunan Education Department Project(Grant No.12B127)Hunan Provincial National Science Foundation Project(Grant No.12JJ4004)
文摘Anisotropic meshes are known to be well-suited for problems which exhibit anisotropic solution features. Defining an appropriate metric tensor and designing an efficient algorithm for anisotropic mesh gen- eration are two important aspects of the anisotropic mesh methodology. In this paper, we are concerned with the natural metric tensor for use in anisotropic mesh generation for anisotropic elliptic problems. We provide an algorithm to generate anisotropic meshes under the given metric tensor. We show that the inverse of the anisotropic diffusion matrix of the anisotropic elliptic problem is a natural metric tensor for the anisotropic mesh generation in three aspects： better discrete algebraic systems, more accurate finite element solution and superconvergence on the mesh nodes. Various numerical examples demonstrating the effectiveness are presented.
基金National Natural Science Foundation of China (Grant Nos. 11131004, 11471169 and 11401555)the Key Laboratory of Pure Mathematics and Combinatorics of Ministry of Education of China and Nankai University, China Postdoctoral Science Foundation (Grant No. 2014T70589)Chinese Universities Scientific Fund (Grant No. WK0010000037)
文摘If all prime closed geodesics on(S^n, F) with an irreversible Finsler metric F are irrationally elliptic,there exist either exactly 2 [(n+1)/2] or infinitely many distinct closed geodesics. As an application, we show the existence of three distinct closed geodesics on bumpy Finsler(S^3, F) if any prime closed geodesic has non-zero Morse index.
文摘This article is devoted to the study of a quasilinear Schrodinger equation coupled with an elliptic equation on the metric g. We first prove that, in this context, the propagation of regularity holds which ensures local wellposedness for initial data small enough in H1/2 and belonging to the Besov space B3/2 2,1. In a second step, we establish Strichartz estimates for time dependent rough metrics to obtain a lower bound of the time existence which only involves the B1＋ε 2,∞ norm on the initial data.
基金supported by National Natural Science Foundation of China (Grant Nos. 11571042, 11371060 and 11631002)Fok Ying Tung Education Foundation (Grant No. 151003)National Science Foundation of USA (Grant No. DMS-0701545)
文摘In this paper, we derive W^(1,∞) and piecewise C^(1,α) estimates for solutions, and their t-derivatives, of divergence form parabolic systems with coefficients piecewise H¨older continuous in space variables x and smooth in t. This is an extension to parabolic systems of results of Li and Nirenberg [Comm Pure Appl Math, 2003, 56:892–925] on elliptic systems. These estimates depend on the shape and the size of the surfaces of discontinuity of the coefficients, but are independent of the distance between these surfaces.
