The case variable model is put forward by analyzing the system model and the IDEFO model. The component variables of the machining system are classified into four types, I. E uncontrolled variables, process variables,...The case variable model is put forward by analyzing the system model and the IDEFO model. The component variables of the machining system are classified into four types, I. E uncontrolled variables, process variables, controlled variables and output variables. The process of building the case base is given. The high-speedcutting data base system is developed based on the presented variable model.展开更多
The full alumina dissolution process in aluminum electrolysis cells was investigated using an improved computational fluid dynamics(CFD)model based on the previous researches by consideration of agglomerate formation....The full alumina dissolution process in aluminum electrolysis cells was investigated using an improved computational fluid dynamics(CFD)model based on the previous researches by consideration of agglomerate formation.The results show that the total mass of alumina agglomerate and its maximum size are mainly dependent on the feeding amount and increase with increasing it.Higher superheat can effectively inhibit the agglomerate formation and thus promote the full alumina dissolution behavior.The full alumina dissolution process mainly includes a fast stage and a slow stage,with an average dissolution rate of 17.24 kg/min and 1.53 kg/min,respectively.About 50%(mass percentage)of the total alumina particles,almost all of which are the well-dispersed alumina fine grains,dissolve within the fast dissolution stage of about 10 s.The maximum values of the average dissolution rate and final percentage of the cumulative dissolved alumina mass are obtained with a feeding amount of 1.8 kg for a superheat of 12℃.The formation of the alumina agglomerates and slow dissolution characteristics play a dominant role in the full dissolution of alumina particles.展开更多
To dynamically update the shape of orebody according to the knowledge of a structural geologist’s insight,an approach of orebody implicit modeling from raw drillhole data using the generalized radial basis function i...To dynamically update the shape of orebody according to the knowledge of a structural geologist’s insight,an approach of orebody implicit modeling from raw drillhole data using the generalized radial basis function interpolant was presented.A variety of constraint rules,including geology trend line,geology constraint line,geology trend surface,geology constraint surface and anisotropy,which can be converted into interpolation constraints,were developed to dynamically control the geology trends.Combined with the interactive tools of constraint rules,this method can avoid the shortcomings of the explicit modeling method based on the contour stitching,such as poor model quality,and is difficult to update dynamically,and simplify the modeling process of orebody.The results of numerical experiments show that the 3D ore body model can be reconstructed quickly,accurately and dynamically by the implicit modeling method.展开更多
A two-dimensional numerical model is developed to simulate the flow,transport and biodegradation of toluene during bioventing （BV） processes in the unsaturated zones.The simulation for a single well BV system is use...A two-dimensional numerical model is developed to simulate the flow,transport and biodegradation of toluene during bioventing （BV） processes in the unsaturated zones.The simulation for a single well BV system is used to illustrate the effect of air injection rate on remediation efficiency.The air is injected into the vadose zone to create a positive pressure.Simulation results show that air injection rate is a primary parameter governing the dispersal,redistribution and surface loss of contaminant.At injection rates of 81.504 m3·d-1 （Run 1） and 407.52 m3·d-1 （Run 2）,the total removed mass of toluene is 169.14 kg and 170.59 kg respectively.Ratios of volatilization to bio-degradation in Run 1 and Run 2 are 0.57︰1 and 0.89︰1,respectively,indicating that lower air injection rate enhances the biodegradation efficiency greatly.Air injection rate should be optimized to meet oxygen demand and to minimize the operational cost.展开更多
In this paper,numerical modeling and model testing of a complex-shaped remotely-operated vehicle（ROV） were shown.The paper emphasized the systematic modeling of hydrodynamic damping using the computational fluid dyn...In this paper,numerical modeling and model testing of a complex-shaped remotely-operated vehicle（ROV） were shown.The paper emphasized the systematic modeling of hydrodynamic damping using the computational fluid dynamic software ANSYS-CFXTM on the complex-shaped ROV,a practice that is not commonly applied.For initial design and prototype testing during the developmental stage,small-scale testing using a free-decaying experiment was used to verify the theoretical models obtained from ANSYS-CFXTM.Simulation results are shown to coincide with the experimental tests.The proposed method could determine the hydrodynamic damping coefficients of the ROV.展开更多
According to the characteristics of spiral mining head for deep seabed cobalt-rich crust, the kinematic model, cutting loads model, quantity of cutting picks model of mining head, granularity distribution model and en...According to the characteristics of spiral mining head for deep seabed cobalt-rich crust, the kinematic model, cutting loads model, quantity of cutting picks model of mining head, granularity distribution model and energy consumption model were constructed. Based on these models, computer simulation program of cutting loads was developed with VB software. The mechanical parameters of mining head were obtained in the cutting depth range of 5160 mm. Making use of the simulation results, the effect of cutting depth of spiral mining head on the mining process was studied. The results show that the maximum force of single pick is 4.7051kN, the maximum force and torque of spiral drum of mining head are respectively 34.1668kN and 3.8795kN·m at the cutting depth of 160mm.展开更多
Temporal and spatial scales play important roles in fishery ecology,and an inappropriate spatio-temporal scale may result in large errors in modeling fish distribution.The objective of this study is to evaluate the ro...Temporal and spatial scales play important roles in fishery ecology,and an inappropriate spatio-temporal scale may result in large errors in modeling fish distribution.The objective of this study is to evaluate the roles of spatio-temporal scales in habitat suitability modeling,with the western stock of winter-spring cohort of neon flying squid （Ornmastrephes bartramii） in the northwest Pacific Ocean as an example.In this study,the fishery-dependent data from the Chinese Mainland Squid Jigging Technical Group and sea surface temperature （SST） from remote sensing during August to October of 2003-2008 were used.We evaluated the differences in a habitat suitability index model resulting from aggregating data with 36 different spatial scales with a combination of three latitude scales （0.5°,1 ° and 2°）,four longitude scales （0.5°,1°,2° and 4°）,and three temporal scales （week,fortnight,and month）.The coefficients of variation （CV） of the weekly,biweekly and monthly suitability index （SI） were compared to determine which temporal and spatial scales of SI model are more precise.This study shows that the optimal temporal and spatial scales with the lowest CV are month,and 0.5° latitude and 0.5° longitude for O.bartramii in the northwest Pacific Ocean.This suitability index model developed with an optimal scale can be cost-effective in improving forecasting fishing ground and requires no excessive sampling efforts.We suggest that the uncertainty associated with spatial and temporal scales used in data aggregations needs to be considered in habitat suitability modeling.展开更多
文摘The case variable model is put forward by analyzing the system model and the IDEFO model. The component variables of the machining system are classified into four types, I. E uncontrolled variables, process variables, controlled variables and output variables. The process of building the case base is given. The high-speedcutting data base system is developed based on the presented variable model.
基金financial supports from the National Natural Science Foundation of China (No. 51704126)the Natural Science Foundation of Jiangsu Province, China (No. BK20170551)Jiangsu Planned Projects for Postdoctoral Research Funds, China (No. 2019K046)。
文摘The full alumina dissolution process in aluminum electrolysis cells was investigated using an improved computational fluid dynamics(CFD)model based on the previous researches by consideration of agglomerate formation.The results show that the total mass of alumina agglomerate and its maximum size are mainly dependent on the feeding amount and increase with increasing it.Higher superheat can effectively inhibit the agglomerate formation and thus promote the full alumina dissolution behavior.The full alumina dissolution process mainly includes a fast stage and a slow stage,with an average dissolution rate of 17.24 kg/min and 1.53 kg/min,respectively.About 50%(mass percentage)of the total alumina particles,almost all of which are the well-dispersed alumina fine grains,dissolve within the fast dissolution stage of about 10 s.The maximum values of the average dissolution rate and final percentage of the cumulative dissolved alumina mass are obtained with a feeding amount of 1.8 kg for a superheat of 12℃.The formation of the alumina agglomerates and slow dissolution characteristics play a dominant role in the full dissolution of alumina particles.
文摘To dynamically update the shape of orebody according to the knowledge of a structural geologist’s insight,an approach of orebody implicit modeling from raw drillhole data using the generalized radial basis function interpolant was presented.A variety of constraint rules,including geology trend line,geology constraint line,geology trend surface,geology constraint surface and anisotropy,which can be converted into interpolation constraints,were developed to dynamically control the geology trends.Combined with the interactive tools of constraint rules,this method can avoid the shortcomings of the explicit modeling method based on the contour stitching,such as poor model quality,and is difficult to update dynamically,and simplify the modeling process of orebody.The results of numerical experiments show that the 3D ore body model can be reconstructed quickly,accurately and dynamically by the implicit modeling method.
基金Supported by the National High Technology Research and Development Program("863"Program)of China(2009AA063102,2007AA061202)
文摘A two-dimensional numerical model is developed to simulate the flow,transport and biodegradation of toluene during bioventing （BV） processes in the unsaturated zones.The simulation for a single well BV system is used to illustrate the effect of air injection rate on remediation efficiency.The air is injected into the vadose zone to create a positive pressure.Simulation results show that air injection rate is a primary parameter governing the dispersal,redistribution and surface loss of contaminant.At injection rates of 81.504 m3·d-1 （Run 1） and 407.52 m3·d-1 （Run 2）,the total removed mass of toluene is 169.14 kg and 170.59 kg respectively.Ratios of volatilization to bio-degradation in Run 1 and Run 2 are 0.57︰1 and 0.89︰1,respectively,indicating that lower air injection rate enhances the biodegradation efficiency greatly.Air injection rate should be optimized to meet oxygen demand and to minimize the operational cost.
文摘In this paper,numerical modeling and model testing of a complex-shaped remotely-operated vehicle（ROV） were shown.The paper emphasized the systematic modeling of hydrodynamic damping using the computational fluid dynamic software ANSYS-CFXTM on the complex-shaped ROV,a practice that is not commonly applied.For initial design and prototype testing during the developmental stage,small-scale testing using a free-decaying experiment was used to verify the theoretical models obtained from ANSYS-CFXTM.Simulation results are shown to coincide with the experimental tests.The proposed method could determine the hydrodynamic damping coefficients of the ROV.
基金Project(DY105 03 02 1) supported by the Deep Ocean Technology Development Itemproject(50474052) supportedby the National Natural Science Foundation of China
文摘According to the characteristics of spiral mining head for deep seabed cobalt-rich crust, the kinematic model, cutting loads model, quantity of cutting picks model of mining head, granularity distribution model and energy consumption model were constructed. Based on these models, computer simulation program of cutting loads was developed with VB software. The mechanical parameters of mining head were obtained in the cutting depth range of 5160 mm. Making use of the simulation results, the effect of cutting depth of spiral mining head on the mining process was studied. The results show that the maximum force of single pick is 4.7051kN, the maximum force and torque of spiral drum of mining head are respectively 34.1668kN and 3.8795kN·m at the cutting depth of 160mm.
基金funded by National High Technology Research and Development Program of China (863 Program,2012AA092303)Project of Shanghai Science and Technology Innovation (12231203900)+2 种基金Industrialization Program of National Development and Reform Commission (2159999)National Science and Technology Support Program (2013BAD13B01)Shanghai Leading Academic Discipline Project
文摘Temporal and spatial scales play important roles in fishery ecology,and an inappropriate spatio-temporal scale may result in large errors in modeling fish distribution.The objective of this study is to evaluate the roles of spatio-temporal scales in habitat suitability modeling,with the western stock of winter-spring cohort of neon flying squid （Ornmastrephes bartramii） in the northwest Pacific Ocean as an example.In this study,the fishery-dependent data from the Chinese Mainland Squid Jigging Technical Group and sea surface temperature （SST） from remote sensing during August to October of 2003-2008 were used.We evaluated the differences in a habitat suitability index model resulting from aggregating data with 36 different spatial scales with a combination of three latitude scales （0.5°,1 ° and 2°）,four longitude scales （0.5°,1°,2° and 4°）,and three temporal scales （week,fortnight,and month）.The coefficients of variation （CV） of the weekly,biweekly and monthly suitability index （SI） were compared to determine which temporal and spatial scales of SI model are more precise.This study shows that the optimal temporal and spatial scales with the lowest CV are month,and 0.5° latitude and 0.5° longitude for O.bartramii in the northwest Pacific Ocean.This suitability index model developed with an optimal scale can be cost-effective in improving forecasting fishing ground and requires no excessive sampling efforts.We suggest that the uncertainty associated with spatial and temporal scales used in data aggregations needs to be considered in habitat suitability modeling.
