Micrometer-scale macroporous aluminosilicate catalyst was prepared via the sol-gel process. Results of catalytic cracking of 1, 3, 5-triisopropylbenzene showed that the synthesized aluminosilicate catalyst exhibited m...Micrometer-scale macroporous aluminosilicate catalyst was prepared via the sol-gel process. Results of catalytic cracking of 1, 3, 5-triisopropylbenzene showed that the synthesized aluminosilicate catalyst exhibited much higher activity than traditional ZSM-5 zeolite under the same condition. It is worth mentioning that the polymer product selectivity of aluminosilicate was much lower than that of ZSM-5, which might be useful for implementing the catalytic cracking process. The unique structure of macroporous aluminosilicate with interconnected-macropores and continuous skeletons was believed to be responsible for its excellent catalytic activity and low polymer product selectivity. Detailed discussion on the reaction pathway was also conducted.展开更多
Contrastive research was carried out to study the thermal properties of open-celled aluminum foams prepared by counter-gravity infiltration casting system and the traditional process respectively.The experimental resu...Contrastive research was carried out to study the thermal properties of open-celled aluminum foams prepared by counter-gravity infiltration casting system and the traditional process respectively.The experimental results show that the thermal conductivity coefficients of aluminum foams prepared by two different infiltration methods have similar increasing trend with the increase of particle size;along with the reducing porosity,the thermal conductivity coefficients will be enhanced oppositely.However,with the same particle size,the open-celled aluminum foam prepared by the former method has a higher thermal conductivity coefficient obviously.It is largely because that the sample prepared by counter-gravity infiltration casting has a lower void content and better dense crystallization of metal-matrix after the constant pressure process.展开更多
Semi open-cell aluminum foams having channels between individual cells were produced using low cost CaCO3foamingagent and applying the powder compact melting process.To this end,the aluminum and CaCO3powder mixtures w...Semi open-cell aluminum foams having channels between individual cells were produced using low cost CaCO3foamingagent and applying the powder compact melting process.To this end,the aluminum and CaCO3powder mixtures were coldcompacted into dense cylindrical precursors for foaming at specific temperatures under air atmosphere.The effects of severalparameters including precursor compaction pressure,foaming agent content as well as temperature and time of the foaming processon the cell microstructure,linear expansion,relative density and compressive properties were investigated.A uniform distribution ofcells with sizes less than100μm,which form semi open-cell structures with relative densities in the range of55.4%-84.4%,wasobtained.The elevation of compaction pressure between127-318MPa and blowing agent up to15%(mass fraction)led to anincrease in the linear expansion,compressive strength and densification strain.By varying the foaming temperature from800to1000°C,all of the investigated parameters increased except compressive strength and relative density.The results indicated theoptimal foaming temperature and time as900°C and10-25min,respectively.展开更多
Porous g-C3N4samples were obtained by simply calcining bulk g-C3N4in static air in a muffle oven.The photocatalytic performance of these samples was evaluated through the removal of aqueous organic dyes（methylene blu...Porous g-C3N4samples were obtained by simply calcining bulk g-C3N4in static air in a muffle oven.The photocatalytic performance of these samples was evaluated through the removal of aqueous organic dyes（methylene blue and methyl orange）and tetracycline hydrochloride under visible-light irradiation（λ〉420 nm）.Compared to bulk g-C3N4,porous g-C3N4exhibited much better capability for removing these contaminants,especially under visible-light irradiation,due to the enlarged specific surface area and more efficient separation of photogenerated charge carries.In particular,porous g-C3N4obtained by calcining bulk g-C3N4in air at 525℃ showed the highest visible-light-driven catalytic activity among these samples.Superoxide radical anions（·O2^-）were found to be the primary active species responsible for photodegradation.展开更多
The nonlinear Hoek-Brown failure criterion was introduced to limit analysis by applying the tangent method. Based on the failure mechanism of double-logarithmic spiral curves on the face of deep rock tunnels, the anal...The nonlinear Hoek-Brown failure criterion was introduced to limit analysis by applying the tangent method. Based on the failure mechanism of double-logarithmic spiral curves on the face of deep rock tunnels, the analytical solutions of collapse pressure were derived through utilizing the virtual power principle in the case of pore water, and the optimal solutions of collapse pressure were obtained by using the optimization programs of mathematical model with regard of a maximum problem. In comparison with existing research with the same parameters, the consistency of change rule shows the validity of the proposed method. Moreover, parametric study indicates that nonlinear Hoek-Brown failure criterion and pore water pressure have great influence on collapse pressure and failure shape of tunnel faces in deep rock masses, particularly when the surrounding rock is too weak or under the condition of great disturbance and abundant ground water, and in this case, supporting measures should be intensified so as to prevent the occurrence of collapse.展开更多
This paper report the synthesis and properties of a series of composite polymer electrolytes formed by dispersion of a non-ionic organic plastic material SN （succinonitrile） into poly（vinyl alcohol） complexed with...This paper report the synthesis and properties of a series of composite polymer electrolytes formed by dispersion of a non-ionic organic plastic material SN （succinonitrile） into poly（vinyl alcohol） complexed with magnesium acid salt. SEM （scanning electron microscope） images of different SN concentrations of films revealed that large open pore structure were also frequently present, when SN content increase up to 7.5 wt%. The addition of SN greatly enhances ionic conductivities of the electrolytes which is due to the high polarity and diffusivity of SN. The Mg2~ （magnesium ion） ion conduction is confirmed from impedance spectroscopy and transport number measurements. The highest conducting sample in the plasticized system was used to fabricate Mg （magnesium） battery with configuration Mg/SPE/TiO2. The discharge capacity of the fabricated battery was 17.5 mAh/gm.展开更多
基金Financial supports from the National Natural Science Foundation of China(No.20973022)
文摘Micrometer-scale macroporous aluminosilicate catalyst was prepared via the sol-gel process. Results of catalytic cracking of 1, 3, 5-triisopropylbenzene showed that the synthesized aluminosilicate catalyst exhibited much higher activity than traditional ZSM-5 zeolite under the same condition. It is worth mentioning that the polymer product selectivity of aluminosilicate was much lower than that of ZSM-5, which might be useful for implementing the catalytic cracking process. The unique structure of macroporous aluminosilicate with interconnected-macropores and continuous skeletons was believed to be responsible for its excellent catalytic activity and low polymer product selectivity. Detailed discussion on the reaction pathway was also conducted.
基金Project(51304254) supported by the National Natural Science Foundation of ChinaProject(2013GK4064) supported by the Strategic Emerging Industry Program of the Ministry of Science and Technology of Hunan Province,China
文摘Contrastive research was carried out to study the thermal properties of open-celled aluminum foams prepared by counter-gravity infiltration casting system and the traditional process respectively.The experimental results show that the thermal conductivity coefficients of aluminum foams prepared by two different infiltration methods have similar increasing trend with the increase of particle size;along with the reducing porosity,the thermal conductivity coefficients will be enhanced oppositely.However,with the same particle size,the open-celled aluminum foam prepared by the former method has a higher thermal conductivity coefficient obviously.It is largely because that the sample prepared by counter-gravity infiltration casting has a lower void content and better dense crystallization of metal-matrix after the constant pressure process.
文摘Semi open-cell aluminum foams having channels between individual cells were produced using low cost CaCO3foamingagent and applying the powder compact melting process.To this end,the aluminum and CaCO3powder mixtures were coldcompacted into dense cylindrical precursors for foaming at specific temperatures under air atmosphere.The effects of severalparameters including precursor compaction pressure,foaming agent content as well as temperature and time of the foaming processon the cell microstructure,linear expansion,relative density and compressive properties were investigated.A uniform distribution ofcells with sizes less than100μm,which form semi open-cell structures with relative densities in the range of55.4%-84.4%,wasobtained.The elevation of compaction pressure between127-318MPa and blowing agent up to15%(mass fraction)led to anincrease in the linear expansion,compressive strength and densification strain.By varying the foaming temperature from800to1000°C,all of the investigated parameters increased except compressive strength and relative density.The results indicated theoptimal foaming temperature and time as900°C and10-25min,respectively.
基金Supported by the National Natural Science Foundation of China(Grant No.21477022)
文摘Porous g-C3N4samples were obtained by simply calcining bulk g-C3N4in static air in a muffle oven.The photocatalytic performance of these samples was evaluated through the removal of aqueous organic dyes（methylene blue and methyl orange）and tetracycline hydrochloride under visible-light irradiation（λ〉420 nm）.Compared to bulk g-C3N4,porous g-C3N4exhibited much better capability for removing these contaminants,especially under visible-light irradiation,due to the enlarged specific surface area and more efficient separation of photogenerated charge carries.In particular,porous g-C3N4obtained by calcining bulk g-C3N4in air at 525℃ showed the highest visible-light-driven catalytic activity among these samples.Superoxide radical anions（·O2^-）were found to be the primary active species responsible for photodegradation.
基金Project(2013CB036004)supported by National Basic Research Program of ChinaProjects(51178468,51378510)supported by National Natural Science Foundation of ChinaProject(CX2013B077)supported by Hunan Provincial Innovation Foundation for Postgraduate,China
文摘The nonlinear Hoek-Brown failure criterion was introduced to limit analysis by applying the tangent method. Based on the failure mechanism of double-logarithmic spiral curves on the face of deep rock tunnels, the analytical solutions of collapse pressure were derived through utilizing the virtual power principle in the case of pore water, and the optimal solutions of collapse pressure were obtained by using the optimization programs of mathematical model with regard of a maximum problem. In comparison with existing research with the same parameters, the consistency of change rule shows the validity of the proposed method. Moreover, parametric study indicates that nonlinear Hoek-Brown failure criterion and pore water pressure have great influence on collapse pressure and failure shape of tunnel faces in deep rock masses, particularly when the surrounding rock is too weak or under the condition of great disturbance and abundant ground water, and in this case, supporting measures should be intensified so as to prevent the occurrence of collapse.
文摘This paper report the synthesis and properties of a series of composite polymer electrolytes formed by dispersion of a non-ionic organic plastic material SN （succinonitrile） into poly（vinyl alcohol） complexed with magnesium acid salt. SEM （scanning electron microscope） images of different SN concentrations of films revealed that large open pore structure were also frequently present, when SN content increase up to 7.5 wt%. The addition of SN greatly enhances ionic conductivities of the electrolytes which is due to the high polarity and diffusivity of SN. The Mg2~ （magnesium ion） ion conduction is confirmed from impedance spectroscopy and transport number measurements. The highest conducting sample in the plasticized system was used to fabricate Mg （magnesium） battery with configuration Mg/SPE/TiO2. The discharge capacity of the fabricated battery was 17.5 mAh/gm.
