期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
高强度碳化硅泡沫陶瓷的制备及其抗压强度研究 被引量:7
1
作者 杨莹 陈斐 +1 位作者 沈强 张联盟 《稀有金属材料与工程》 SCIE EI CAS CSCD 北大核心 2011年第S1期7-10,共4页
选用Al2O3、Y2O3作为烧结助剂,通过有机模板复制法及多次浸渍涂覆工艺制备出高强度碳化硅泡沫陶瓷材料。系统地研究了原料组成、烧结温度等工艺参数对制得的碳化硅泡沫陶瓷物相组成、宏观结构、微观结构的影响,同时对陶瓷的气孔率、力... 选用Al2O3、Y2O3作为烧结助剂,通过有机模板复制法及多次浸渍涂覆工艺制备出高强度碳化硅泡沫陶瓷材料。系统地研究了原料组成、烧结温度等工艺参数对制得的碳化硅泡沫陶瓷物相组成、宏观结构、微观结构的影响,同时对陶瓷的气孔率、力学性能等进行了测试。结果表明:通过选取不同PPI值的有机泡沫模板,泡沫陶瓷宏观孔径可控;随着涂覆次数的增加,陶瓷体孔径减小、孔棱直径增加;随着烧结温度的提高,孔棱致密度增加,抗压强度显著提高;在1700℃下获得了20PPI值,气孔率为77%,抗压强度达2.48MPa的碳化硅泡沫陶瓷。 展开更多
关键词 泡沫陶瓷 碳化硅(SiC) 烧结助剂 有机模板复制法 抗压强度
原文传递
Compressive properties of open-cell ceramic foams 被引量:1
2
作者 张俊彦 傅衣铭 曾晓明 《中国有色金属学会会刊:英文版》 CSCD 2006年第B02期453-456,共4页
The compressive experiments of two kinds of ceramic foams were completed. The results show that the behavior of ceramic foams made by organic filling method is anisotropic. The stress-strain responses of ceramic foams... The compressive experiments of two kinds of ceramic foams were completed. The results show that the behavior of ceramic foams made by organic filling method is anisotropic. The stress-strain responses of ceramic foams made by sponge-replication show isotropy and strain rate dependence. The struts brittle breaking of net structure of this ceramic foam arises at the weakest defects of framework or at the part of framework, which causes the initiation and expanding of cracks. The compressive strength of ceramic foam is dependent on the strut size and relative density of foams. 展开更多
关键词 开孔陶瓷泡沫 应力-应变曲线 压缩试验 弹力
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部