基于MATLAB的任意点开采沉陷与移动变形系统实现

文章先介绍了开采沉陷的概率积分法的单元开采积分公式,并给出任意点开采沉陷与移动变形的积分公式表达式,然后利用MATLAB自带GUI界面编辑器编制系统界面,再通过MATLAB编程的强大函数库实现从数据读取到开采沉陷与移动变形的积分计算及最终的数据输出和函数计算整个流程,并在文中展示MATLAB的GUI界面及某矿编程实现的地表下沉和等高线的绘制。通过对程序和概率积分法原理的分析可以得知,通过实例表明,该程序通过简单调整,可以应对多工作面和大多数矿区采煤开采沉陷任意点的移动变形监测。

利用无人机低空数码航测技术监测矿区开采沉陷变形的初步研究

针对我国许多矿区由于过度开采而造成的大量山体滑坡现象,提出了利用无人机低空数码航测技术监测矿区开采沉陷变形的初步研究,来协助解决此类现象。无人机低空数码航测技术的使用过程包括设计无人机航线、调试无人机飞行设备、处理拍摄数据和绘制矿区开采剖面图四个环节,来完成对矿区开采沉陷变形的监测工作;之后通过对比实验证实了无人机低空数码航测技术的准确程度高于传统的监测技术,因此说明无人机低空数码航测技术具有实用价值,应当尽快应用到矿区的监测工作中。

大社矿井下开采对水体拦水坝的破坏机理及治理措施

通过分析开采引起的各种移动变形,对水体拦水坝的破坏机理进行了分析,结合各水体拦水坝的结构特点和所承受的开采变形情况,提出了针对性的井上下治理措施。其中,西佛店、大淑村、南旺和香山圆水体需在开采过程中对拦水坝裂缝进行治理;矸石山水体和香山水体需要在开采前对拦水坝进行工程治理,在开采过程中对坝体裂缝进行治理。

条带开采沉陷预测分析与工程应用

为了合理确定条带开采留宽长度,模拟条带开采引起的地表变形,开挖环境的工程措施要求、保护对象的空间位置和开采岩层的情况,选用相应的条带开采沉陷机理、计算模型和计算方法,用以预测设计开采区的地表变形以及采后数据整理。全部工作是在自行研发的软件包的基础上完成,实现了地表变形计算的可视化分析系统。依据马蹄沟煤矿地面观测资料及采区的地质开采条件为基础,应用该系统,指导该矿成功的在河流及建筑物下开采,做到了准确预测预报。

采矿引发地表变形对建筑物的损坏程度预测评估

以某煤矿为例,经实地野外调查,充分分析了矿区地形地貌、地层岩性、地质构造、工程地质特征等,预测评估了煤矿开采引发地表变形对建筑物的损坏程度,为矿方制定目标、提出决策等提供了科学的理论依据。

Relationship between the rock mass deformation and places of occurrence of seismological events

Static effort of rock mass very rarely causes of rock burst in polish coal mines. Rock bursts with source in the seismic tremor within the roof rock layers are prevailing. A seismic tremor is an effect of rupture or sliding in roof layers above the exploited panel in coal seam, sometime in a distance from actual exploitation. Sliding, as a rule occurs in fault zone and tremors in it are expected, but monolithic layer rupture is very hard to predict. In a past few years a practice of analyzing state of deformation in high energy seismic tremors zones has been employed. It let gathering experience thanks to witch determination of dangerous shape of reformatted roof is possible. In the paper some typical forms of roof rocks deformations leading to seismic tremor occurrence will be presented. In general these are various types of multidirectional rock layers bending. Real examples of seismic events and rock bursts will be shown.

Movement and deformation laws of the overlying strata in paste filling stope

We combined the similar simulation with numerical simulation to analyze the movement and deforma- tion features of overlying strata caused by paste backfill mining, study the movement and deformation laws of the overlying strata in paste backfill mining, structural movement of the stope strata as well as the stope stress distribution laws. Furthermore, authors also explored the key factors to the movement and deformation of the overlying strata in paste backfill mining. The results indicate that a caving zone existed in the bending zone only in the overlying strata of the paste backfill mining. Compared with the roof caving mining, the degree of stress concentration and area of influence in the paste filling stope were apparently smaller. And the degree of destruction and area of the overlying strata decreased prominently. Also, there was no apparent strata behavior in the working face. Lastly, the filling ratio was the key to control the movement and deformation of the overlying strata. Combined with a specific engineering example, the author proved the reliability of the simulation results and provided a theoretical basis for the further extension of the paste backfill mining.

Surface movement and deformation characteristics due to high- intensive coal mining in the windy and sandy region

As China＇s energy strategy moving westward, the surface movement and deformation characteristics due to high-intensive coal mining in the windy and sandy region become a research hotspot. Surface movement observation stations were established to monitor movement and deformation in one super-large working face. Based on field measurements, the surface movement and deformation characteristics were obtained, including angle parameters, subsidence prediction parameters, etc. Besides, the angle and subsidence prediction parameters in similar mining areas are summarized; the mechanism of surface movement and deformation was analyzed with the combination of key stratum theory, mining and geological conditions. The research also indicates that compared with conventional working faces, uniform subsidence area of the subsidence trough in the windy and sandy region is larger, the trough margins are relative steep and deformation values present convergence at the margins, the extent of the trough shrink towards the goaf and the influence time of mining activities lasts shorter; the overlying rock movement and breaking characteristics presents regional particularity in the study area, while the single key stratum, thin bedrock and thick sand that can rapidly propagate movement and deformation are the deep factors, contributing to it.

Experimental study on the bolt–cable combined supporting technology for the extraction roadways in weakly cemented strata

Aiming at the characteristics of the poor steady ability, the short stable time and severe deformation behavior of weakly cemented soft surrounding rock around extraction roadway, a bolt–cable combined supporting technology was proposed. Numerical simulation was performed by using FLAC3 D software to study the effects of different supporting systems. The simulation result proves that those supporting systems have good practical values. Based on real-time monitoring and analysis of the deformation of surrounding rock and the stress of supporting structure, real time information of deformation of surrounding rock and stress state of supporting structure of extraction roadway within weakly cemented strata was obtained. Monitoring results show that large deformation and failure of surrounding rock of extraction roadway within weakly cemented strata can be effectively controlled by the bolt–cable combined supporting technology, which ensures the long-term stability and safety of surrounding rock and supporting structure.

Design concerns of room and pillar retreat panels

Why do some room and pillar retreat panels encounter abnormal conditions？ What factors deserve the most consideration during the planning and execution phases of mining and what can be done to mitigate those abnormal conditions when they are encountered7 To help answer these questions, and to determine some of the relevant factors influencing the conditions of room and pillar （R ＆ P） retreat min- ing entries, four consecutive R ＆ P retreat panels were evaluated. This evaluation was intended to rein- force the influence of topographic changes, depth of cover, multiple-seam interactions, geological conditions, and mining geometry. This paper details observations were made in four consecutive R ＆ P retreat panels and the data were collected from an instrumentation site during retreat mining. The pri- mary focus was on the differences observed among the four panels and within the panels themselves. The instrumentation study was initially planned to evaluate the interactions between primary and secondary support, but produced rather interesting results relating to the loading encountered under the current mining conditions. In addition to the obse^ation and ｜ll^trumentation, numerical modeling was per- formed to evaluate the stress condi~!ons. Both the LaModel 3.0 and Rocscience Phase 2 programs were used to evaluate these four panels, The results of both models indicated a drastic reduction in the vertical stresses experienced in these panels due to the full extraction mining in overlying seams when compared to the full overburden load. Both models showed a higher level of stress associated with the outside entries of the panels. These results agree quite well with the observations and instrumentation studies performed at the mine. These efforts provided two overarching conclusions concerning R ＆ P retreat mine planning and execution. The first was that there are four areas that should not be overlooked during R ＆ P retreat mining： topographic relief, multiple^seaPa stress relief, stress concentrations near the gob edge, and geologic changes in the immediate roof. The second is that in order to successfully retreat an R ＆ P panel, a three-phased approach to the design and analysis of the panel should be conducted： the planning phase, evaluation phase, and monitoring phase.

Numerical simulation and experimental research of surrounding rock deformation of floor roadway under short-distance coal seam group combined mining

According to the influence of the combination of short-distance coal seam group on mining roadway, using numerical simulation software FLAG2D to draw the abutment pressure distribution ahead the working face and the area of influence in fully-mechanized mining conditions, the variation rules of surrounding rock supporting pressure of floor roadway and the deformation rules were summarized. GYS-300 anchor dynamometer was used to measure the roadway surface displacement, and the conclusions of numerical simulation were verified.

Numerical simulation study of the influence on stability of slope by underground mining under opencast coal mine slope

In view of the study on mining transferred from open-pit to underground, the research on the problem of the stabil- ity of slope is less. This article combined the actual situation of the Gaohai Coal Mine in Fuxin City and set up a three-dimensional model of the part of Huizhou open-pit slope by the finite difference software. Through the three-dimensional numerical simulation study of the influence on the stability of slope by underground mining, the basic characteristics of the open-pit slope deformation and the situation of basic stability were discussed. The simulation results of the mining slope of the displacement and deformation analysis of the state for mining provide a reference to the slope stability research.

Deformation effect of lateral roof roadway in close coal seams after repeated mining

This paper analyzed the deformation mechanism in lateral roof roadway of the Ding Wu-3 roadway which was disturbed by repeated mining of close coal seams Wu-8 and Wu-10 in Pingdingshan No. 1 Mine. To determine the strata disturbance scope, the strata displacement angle was used to calculate the protection pillar width. A numerical model was built considering the field geological conditions. In simulation, the mining stress borderline was defined as the contour where the induced stress is 1.5 times of the original stress. Simulation results show the mining stress borderline of the lateral roadway extended 91.7 m outward after repeated mining. Then the original stress increased, deforming the road- way of interest. This deformation agreed with the in situ observations. Moreover, the strata displacement angle changed due to repeated mining. Therefore, reselection of the displacement angle was required to design the protective pillar width. Since a constant strata displacement angle was used in traditional design, the orooosed method was beneficial in field cases.

Roadway deformation during riding mining in soft rock

"Riding mining" is a form of mining where the working face is located above the roadway and advances parallel to it.Riding mining in deep soft rock creates a particular set of problems in the roadway that include high stresses,large deformations,and support difficulties.Herein we describe a study of the rock deformation mechanism of a roadway as observed during riding mining in deep soft rock.Theoretical analysis,numerical simulations,and on site monitoring were used to examine this problem.The stress in the rock and the visco-elastic behavior of the rock are considered.Real time data,recorded over a period of 240 days,were taken from a 750 transportation roadway.Stress distributions in the rock surrounding the roadway were studied by comparing simulations to observations from the mine.The rock stress shows dynamic behavior as the working face advances.The pressure increases and then drops after peaking as the face advances.Both elastic and plastic deformation of the surrounding rock occurs.Plastic deformation provides a mechanism by which stress in the rock relaxes due to material flow.A way to rehabilitate the roadway is suggested that will help ensure mine safety.

Gateside packwall design in solid backfill mining-A case study

Based upon characteristic movement features of the overlying strata in solid backfill mining and in-situ observations,an associated model representing a roadway support system has been developed.Based on the Winkler foundation and beam model,the current study presents a static analysis of the model,thus permitting acquisition of a theoretical formula pertaining to roof convergence.Through use of working face 6304-1(Jisan Colliery) as the research setting,the association between roof convergence magnitude and both packwall strength and width have been elucidated.Based upon observed conditions at the working face,realistic packwall parameters have been formulated,with numerical simulation results and field application results indicating that design parameters garnered from the developed formula successfully adapted to local geological movement and deformation.Accordingly,roadway deformation was shown to be within the permissible range,thus satisfying mine production requirements.The proposed method in the current study may give a design basis for pack design in the context of SBM under similar conditions.

bStudy on constitutive relationship of coal based on conventional triaxial compression test

Constitutive relationship of coal under triaxial compression must be determined during solving the theoretical calculation and numerical simulation about coal body failure. This paper carried out conventional triaxial compression test on No.3 coal of Baodian Colliery using MTS815.03 servo-controlled rock mechanical test system. The results indicate that the failure process of coal can be divided into 5 stages： densification stage, apparent linear elastic deformation stage, accelerated inelastic deformation stage, fracture and developing stage and plasticity flow stage. Combined with the test results, the constitutive relationship model of coal can be simplified as the four segments of straight line model of elastic-plastic hardening-plastic softening-residual perfectly plastic. Through fitting calculation of test data, the segmented constitutive equation of coal can be obtained.

Analytical and numerical method assessing the risk of sinkholes formation in mining areas

Voids, which have not been liquidated and associated with shallow mining excavations, pose a serious threat of potential formation of sinkholes. This threat is connected with the loss of stability of voids that had been formed as a result of mining operations in the deeper strata. Taking into account the impact of lower coal seams mining on shallow excavations and based on the example of a region that had been intensely exploited, this paper proposes a methodology for analysing the stability of shallow mine voids in the rock mass. Deformations in the excavation region were calculated by using FLAC2D computer pro- gram and assigning the Coulomb-Mohr model to the rock mass. Based on the numerical analysis, this paper evaluated the stability of the void in the event of a roof support fall. The results indicate the like- lihood of void formation. Based on the Budryk-Knotbe theory, the deformations of rock mass and sand- stone strata in the roof of the void, which had been caused by mining exploitation in consecutive years, were calculated. The results of numerical calculations and analyses were compared with the limit defor- mations values of sandstone in tension. It is concluded that the exploitations cause the void to break down. The proposed method can forecast the discontinuous deformations threats in the areas that have undergone shallow undermining exploitation and the areas of underground urban.

Mountain ground movement prediction caused by mining based on BP-neural network

Six main influencing factors： slope, aspect, distance, angle, angle of coal seam, and the ratio of depth and thickness, were selected by Grey correlation theory and Grey relational analysis procedure programmed by the MATLAB software package to select the surface movement and deformation parameters. On this basis, the paper built a BP neural network model that takes the six main influencing factors as input data and corresponding value of ground subsidence as output data. Ground subsidence of the 3406 mining face in Haoyu Coal was predicted by the trained BP neural network. By comparing the prediction and the practices, the research shows that it is feasible to use the 13P neural network to predict mountain mining subsidence.

采动区建筑物抗变形隔震装置的力学性能分析

介绍了采动区建筑物抗变形隔震装置的基本构成,并基于地震工程学和开采沉陷学的原理对抗变形隔震支座进行了理论分析,通过实验对采动区抗变形隔震支座在低周反复荷载作用下的滞回耗能特性进行了分析。结果显示,在低周循环荷载作用下采动区抗变形隔震支座的滞回耗能曲线饱满,表明其良好的自复位、耗能能力和变形能力大、稳定的滞回性能等特点,说明抗变形隔震支座的传力机制明确、构造比较合理。隔震支座充分利用了铅芯橡胶、粘滞阻尼器和蝶形弹簧三种不同的耗能材料和耗能机制,其适宜的水平隔震刚度和阻尼耗能性能、竖向能够抵抗不均匀沉降,充分体现了其良好的整体稳定性。该抗变形隔震支座有效的改善了采动区建筑抵抗煤矿采动损害和震害的能力,为采动区建筑物保护提供科学方法和依据。