The vector transformation and pole reduction from the total-field anomaly are signifi cant for the interpretation.We examined these industry-standard processing procedures in the Fourier domain.We propose a novel iter...The vector transformation and pole reduction from the total-field anomaly are signifi cant for the interpretation.We examined these industry-standard processing procedures in the Fourier domain.We propose a novel iteration algorithm for regional magnetic anomalies transformations to derive the vertical-component data from the total-field measurements with the variation in the core-fi eld direction over the region.Additionally,we use the same algorithm to convert the calculated vertical-component data into the corresponding data at the pole and realize the processing of diff erential reduction to the pole(DRTP).Unlike Arkani-Hamed’s DRTP method,the two types of iterative algorithms have the same forms,and DRTP is realized by implementing this algorithm twice.The synthetic model’s calculation results show that the method has high accuracy,and the fi eld data processing confi rms its practicality.展开更多
On July 22, 2013, the Minxian-Zhangxian Ms6. 6 earthquake occurred on the east segment of Lintan-Dangchang fault. The analysis of digital elevation and remote sensing imaging shows that the east segment of Lintan-Dang...On July 22, 2013, the Minxian-Zhangxian Ms6. 6 earthquake occurred on the east segment of Lintan-Dangchang fault. The analysis of digital elevation and remote sensing imaging shows that the east segment of Lintan-Dangchang fault is still active and the main thrust feature of the fault switches to left lateral slip. With the field research of intensity and damage, several abnormal areas of degree VIII spread in the isoseismal line of degree VII and some abnormal areas of degree VII spread in the isoseismal line of degree VI. These abnormal areas are distributed along the hanging wall of the fault in a width of 2km. The analysis based on the remote sensing and digital elevation model shows that the segment of the Lintan-Dangchang fault south of Minxian mainly slips in left literal. The fault movement made the soil soft in the fault zone. The earthquake motion propagated along the fault zone. Therefore the strong earthquake motion caused foundation failure in the soft soil along the fault zone and the abnormal intense areas of disaster formed.展开更多
Within the model, a definition of novel saturation and dilution degree is presented. A novel expression of equilibrium constant is derived by including interactions between components to reversible processes running b...Within the model, a definition of novel saturation and dilution degree is presented. A novel expression of equilibrium constant is derived by including interactions between components to reversible processes running between the components particles under a dynamic equilibrium. For partition equilibria, three types of basic processes are proposed and corresponding partition isotherms were derived. The isotherms are applied to the components partition between two phases for main heterogenous systems types. For construction and prediction ternary phase diagrams, a new method, the Component Binding by Saturation Model （CBSM） method, is proposed. Applying the partition isotherms derived, new extraction, evaporation and adsorption isotherms are expressed. Directly, or after an approximation, from the new adsorption isotherms, well-known adsorption isotherms are obtained.展开更多
In order to study the characteristics of crustal deformation around the epicenter before the 2016 M_S6. 4 Menyuan earthquake,the GPS continuous stations of the period from 2010 to 2016 were selected according to the o...In order to study the characteristics of crustal deformation around the epicenter before the 2016 M_S6. 4 Menyuan earthquake,the GPS continuous stations of the period from 2010 to 2016 were selected according to the observation data of the tectonic environment monitoring network in Chinese Mainland. The deformation characteristics of the crust before the earthquake were discussed through inter-station baseline time series analysis and the strain time series analysis in the epicentral region. The results show that a trend turn of the baseline movement state around the epicenter region occurred after 2014,and the movement after 2014 reflects an obvious decreasing trend of compressional deformation.During this period,the stress field energy was in a certain accumulation state. Since the beginning of 2014,the EW-component linear strain and surface strain rate weakened gradually before the earthquake. It shows that there was an obvious deformation deficit at the epicentral area in the past two years,which indicates that the region accumulated a high degree of strain energy before the earthquake. Therefore,there was a significant background change in the area before the earthquake. The results of the study can provide basic research data for understanding the seismogenic process and mechanism of this earthquake.展开更多
The intense deformation zone in the central Indian Ocean, south of Indian continent is one of the most complex regions in terms of its structure and geodynamics. The deformation zone has been studied and debated in 19...The intense deformation zone in the central Indian Ocean, south of Indian continent is one of the most complex regions in terms of its structure and geodynamics. The deformation zone has been studied and debated in 1990s for its genesis. It was argued that deformation is mainly confined to sedimentary and oceanic crustal layers, while the large wave length geoidal anomalies, on which the deformation region lies, called for deeper sources. The inter connection between deeper and the shallower sources is found missing. The current study focuses on the complexities of this region by analyzing OBS （ocean bottom seismometer） data. The data acquired by five OBS systems along a 300 km long south-north profile in the CIOB （central Indian Ocean basin） have been modeled and the crustal and sub-crustal structure has been determined using 2-D tomographic inversion. Four subsurface layers are identified representing the sediment column, upper crustal layer, lower crustal layer and a sub-crustal layer （upper mantle layer）. A considerable variation in thickness as well as velocity at all interfaces from sedimentary column to upper mantle is observed which indicates that the tectonic forces have affected the entire crust and sub-crustal configuration. The sediments are characterized by higher velocities （2.1 kin/s） due to the increased confining pressure. Modeling results indicated that the velocity in upper crust is in the range of 5.7-6.2 km/s and the velocity of the lower crust varies from 7.0-7.6 km/s. The velocity of the sub-crustal layer is in the range of 7.8-8.4 km/s. This high-velocity layer is interpreted as magmatic under-plating with strong lateral variations. The base of the 7.0 km/s layer at 12-15 km depth is interpreted as the Moho.展开更多
基金supported by the National Key R&D Program of China (No. 2017YFC0602000)the China Geological Survey Project (Nos. DD20191001 and DD20189410)。
文摘The vector transformation and pole reduction from the total-field anomaly are signifi cant for the interpretation.We examined these industry-standard processing procedures in the Fourier domain.We propose a novel iteration algorithm for regional magnetic anomalies transformations to derive the vertical-component data from the total-field measurements with the variation in the core-fi eld direction over the region.Additionally,we use the same algorithm to convert the calculated vertical-component data into the corresponding data at the pole and realize the processing of diff erential reduction to the pole(DRTP).Unlike Arkani-Hamed’s DRTP method,the two types of iterative algorithms have the same forms,and DRTP is realized by implementing this algorithm twice.The synthetic model’s calculation results show that the method has high accuracy,and the fi eld data processing confi rms its practicality.
基金supported by basic scientific research operating expenses of Institute of Earthquake Science,China Earthquake Administration(2012IES010202)
文摘On July 22, 2013, the Minxian-Zhangxian Ms6. 6 earthquake occurred on the east segment of Lintan-Dangchang fault. The analysis of digital elevation and remote sensing imaging shows that the east segment of Lintan-Dangchang fault is still active and the main thrust feature of the fault switches to left lateral slip. With the field research of intensity and damage, several abnormal areas of degree VIII spread in the isoseismal line of degree VII and some abnormal areas of degree VII spread in the isoseismal line of degree VI. These abnormal areas are distributed along the hanging wall of the fault in a width of 2km. The analysis based on the remote sensing and digital elevation model shows that the segment of the Lintan-Dangchang fault south of Minxian mainly slips in left literal. The fault movement made the soil soft in the fault zone. The earthquake motion propagated along the fault zone. Therefore the strong earthquake motion caused foundation failure in the soft soil along the fault zone and the abnormal intense areas of disaster formed.
文摘Within the model, a definition of novel saturation and dilution degree is presented. A novel expression of equilibrium constant is derived by including interactions between components to reversible processes running between the components particles under a dynamic equilibrium. For partition equilibria, three types of basic processes are proposed and corresponding partition isotherms were derived. The isotherms are applied to the components partition between two phases for main heterogenous systems types. For construction and prediction ternary phase diagrams, a new method, the Component Binding by Saturation Model （CBSM） method, is proposed. Applying the partition isotherms derived, new extraction, evaporation and adsorption isotherms are expressed. Directly, or after an approximation, from the new adsorption isotherms, well-known adsorption isotherms are obtained.
基金funded by the Earthquake Science and Technology Development Fund of GEA(Grant No.2016M02,2016Y02)the Earthquake Tracking Task of CEA(2017010221)+1 种基金the Fund of Science for Earthquake Resilience,CEA,(XH16038Y,XH14049)Grant of National Natural Science Foundation of China(51408567,41304048)
文摘In order to study the characteristics of crustal deformation around the epicenter before the 2016 M_S6. 4 Menyuan earthquake,the GPS continuous stations of the period from 2010 to 2016 were selected according to the observation data of the tectonic environment monitoring network in Chinese Mainland. The deformation characteristics of the crust before the earthquake were discussed through inter-station baseline time series analysis and the strain time series analysis in the epicentral region. The results show that a trend turn of the baseline movement state around the epicenter region occurred after 2014,and the movement after 2014 reflects an obvious decreasing trend of compressional deformation.During this period,the stress field energy was in a certain accumulation state. Since the beginning of 2014,the EW-component linear strain and surface strain rate weakened gradually before the earthquake. It shows that there was an obvious deformation deficit at the epicentral area in the past two years,which indicates that the region accumulated a high degree of strain energy before the earthquake. Therefore,there was a significant background change in the area before the earthquake. The results of the study can provide basic research data for understanding the seismogenic process and mechanism of this earthquake.
文摘The intense deformation zone in the central Indian Ocean, south of Indian continent is one of the most complex regions in terms of its structure and geodynamics. The deformation zone has been studied and debated in 1990s for its genesis. It was argued that deformation is mainly confined to sedimentary and oceanic crustal layers, while the large wave length geoidal anomalies, on which the deformation region lies, called for deeper sources. The inter connection between deeper and the shallower sources is found missing. The current study focuses on the complexities of this region by analyzing OBS （ocean bottom seismometer） data. The data acquired by five OBS systems along a 300 km long south-north profile in the CIOB （central Indian Ocean basin） have been modeled and the crustal and sub-crustal structure has been determined using 2-D tomographic inversion. Four subsurface layers are identified representing the sediment column, upper crustal layer, lower crustal layer and a sub-crustal layer （upper mantle layer）. A considerable variation in thickness as well as velocity at all interfaces from sedimentary column to upper mantle is observed which indicates that the tectonic forces have affected the entire crust and sub-crustal configuration. The sediments are characterized by higher velocities （2.1 kin/s） due to the increased confining pressure. Modeling results indicated that the velocity in upper crust is in the range of 5.7-6.2 km/s and the velocity of the lower crust varies from 7.0-7.6 km/s. The velocity of the sub-crustal layer is in the range of 7.8-8.4 km/s. This high-velocity layer is interpreted as magmatic under-plating with strong lateral variations. The base of the 7.0 km/s layer at 12-15 km depth is interpreted as the Moho.
