One of the challenges for bimetal manufacturing is the joining process.Hence,transient liquid phase(TLP)bonding was performed between 304L stainless steel and Cp-Ti using an Ag-Cu interlayer with a thickness of 75μm ...One of the challenges for bimetal manufacturing is the joining process.Hence,transient liquid phase(TLP)bonding was performed between 304L stainless steel and Cp-Ti using an Ag-Cu interlayer with a thickness of 75μm for bonding time of 20,40,60,and 90 min.The bonding temperature of 860℃ was considered,which is under the β transus temperature of Cp-Ti.During TLP bonding,various intermetallic compounds(IMCs),including Ti_(5)Cr_(7)Fe_(17),(Cr,Fe)_(2)Ti,Ti(Cu,Fe),Ti_(2)(Cu,Ag),and Ti_(2)Cu from 304L toward Cp-Ti formed in the joint.Also,on the one side,with the increase in time,further diffusion of elements decreases the blocky IMCs such as Ti_(5)Cr_(7)Fe_(17),(Cr,Fe)_(2)Ti,Ti(Cu,Fe)in the 304L diffusion-affected zone(DAZ)and reaction zone,and on the other side,Ti_(2)(Cu,Ag)IMC transformed into fine morphology toward Cp-Ti DAZ.The microhardness test also demonstrated that the(Cr,Fe)_(2)Ti+Ti_(5)Cr_(7)Fe_(17) IMCs in the DAZ on the side of 304L have a hardness value of HV 564,making it the hardest phase.The maximum and minimum shear strength values are equal to 78.84 and 29.0 MPa,respectively.The cleavage pattern dominated fracture surfaces due to the formation of brittle phases in dissimilar joints.展开更多
Heterogeneous-structured Cu samples composed of coarse-grained(CG) and ultrafine-grained(UFG) domains with a transitional interface were fabricated by friction stir processing, in order to investigate the effect of in...Heterogeneous-structured Cu samples composed of coarse-grained(CG) and ultrafine-grained(UFG) domains with a transitional interface were fabricated by friction stir processing, in order to investigate the effect of interface constraint on the yielding and fracture behaviors. Tensile test revealed that the synergetic strengthening induced by elastic/plastic interaction between incompatible domains increases with increasing the area of constraint interface. The strain distribution near interface and the fracture morphology were characterized using digital image correlation technique and scanning electron microscopy, respectively. Fracture dimples preferentially formed at the interface, possibly due to extremely high triaxial stress and strain accumulation near the interface. Surprisingly, the CG domain was fractured by pure shear instead of the expected voids growth caused by tensile stress.展开更多
The representation method of heterogeneous material information is one of the key technologies of heterogeneous object modeling, but almost all the existing methods cannot represent non-uniform rational B-spline （NU...The representation method of heterogeneous material information is one of the key technologies of heterogeneous object modeling, but almost all the existing methods cannot represent non-uniform rational B-spline （NURBS） entity. According to the characteristics of NURBS, a novel data structure, named NURBS material data structure, is proposed, in which the geometrical coordinates, weights and material coordinates of NURBS heterogene- ous objects can be represented simultaneously. Based on this data structure, both direct representation method and inverse construction method of heterogeneous NURBS objects are introduced. In the direct representation method, three forms of NURBS heterogeneous objects are introduced by giving the geometry and material information of con- trol points, among which the homogeneous coordinates form is employed for its brevity and easy programming. In the inverse construction method, continuous heterogeneous curves and surfaces can he obtained by interpolating discrete points and curves with specified material information. Some examples are given to show the effectiveness of the pro- posed methods.展开更多
This paper describes the analysis of the thermal stress concentration and the effects of geometrical shape in the interfacial edge by FEM. It is shown that the elevated stress in a dissim...This paper describes the analysis of the thermal stress concentration and the effects of geometrical shape in the interfacial edge by FEM. It is shown that the elevated stress in a dissimilar material caused by temperature is only restricted in a minor region of the interfacial edge, where the stress peak value and and the stress gradient are high. It is also found that narrowing the boundary angle can effectively reduce the peak value of stress components on the interfacial layer, especially the peeling stress σ y , which is a condition of the debonding failure in the interface.θ=60, an obvious variation, proves that selecting a reasonable edge geometrical shape helps to reduce the value of the maximum stress. At last the methods of relaxing stress concentration and effects of the geometric blunt are also discussed.展开更多
The steady two-dimensional flow of Powell-Eyring fluid is investigated. The flow is caused by a stretching surface with homogeneous-heterogeneous reactions. The governing nonlinear differential equations are reduced t...The steady two-dimensional flow of Powell-Eyring fluid is investigated. The flow is caused by a stretching surface with homogeneous-heterogeneous reactions. The governing nonlinear differential equations are reduced to the ordinary differential equations by similarity transformations. The analytic solutions are presented in series forms by homotopy analysis method(HAM). Convergence of the obtained series solutions is explicitly discussed. The physical significance of different parameters on the velocity and concentration profiles is discussed through graphical illustrations. It is noticed that the boundary layer thickness increases by increasing the Powell-Eyring fluid material parameter(ε) whereas it decreases by increasing the fluid material parameter(δ). Further, the concentration profile increases when Powell-Eyring fluid material parameters increase. The concentration is also an increasing function of Schmidt number and decreasing function of strength of homogeneous reaction. Also mass transfer rate increases for larger rate of heterogeneous reaction.展开更多
文摘One of the challenges for bimetal manufacturing is the joining process.Hence,transient liquid phase(TLP)bonding was performed between 304L stainless steel and Cp-Ti using an Ag-Cu interlayer with a thickness of 75μm for bonding time of 20,40,60,and 90 min.The bonding temperature of 860℃ was considered,which is under the β transus temperature of Cp-Ti.During TLP bonding,various intermetallic compounds(IMCs),including Ti_(5)Cr_(7)Fe_(17),(Cr,Fe)_(2)Ti,Ti(Cu,Fe),Ti_(2)(Cu,Ag),and Ti_(2)Cu from 304L toward Cp-Ti formed in the joint.Also,on the one side,with the increase in time,further diffusion of elements decreases the blocky IMCs such as Ti_(5)Cr_(7)Fe_(17),(Cr,Fe)_(2)Ti,Ti(Cu,Fe)in the 304L diffusion-affected zone(DAZ)and reaction zone,and on the other side,Ti_(2)(Cu,Ag)IMC transformed into fine morphology toward Cp-Ti DAZ.The microhardness test also demonstrated that the(Cr,Fe)_(2)Ti+Ti_(5)Cr_(7)Fe_(17) IMCs in the DAZ on the side of 304L have a hardness value of HV 564,making it the hardest phase.The maximum and minimum shear strength values are equal to 78.84 and 29.0 MPa,respectively.The cleavage pattern dominated fracture surfaces due to the formation of brittle phases in dissimilar joints.
基金Projects(11672195,51301092) supported by the National Natural Science Foundation of ChinaProject(2016JQ0047) supported by Sichuan Youth Science and Technology Foundation,China
文摘Heterogeneous-structured Cu samples composed of coarse-grained(CG) and ultrafine-grained(UFG) domains with a transitional interface were fabricated by friction stir processing, in order to investigate the effect of interface constraint on the yielding and fracture behaviors. Tensile test revealed that the synergetic strengthening induced by elastic/plastic interaction between incompatible domains increases with increasing the area of constraint interface. The strain distribution near interface and the fracture morphology were characterized using digital image correlation technique and scanning electron microscopy, respectively. Fracture dimples preferentially formed at the interface, possibly due to extremely high triaxial stress and strain accumulation near the interface. Surprisingly, the CG domain was fractured by pure shear instead of the expected voids growth caused by tensile stress.
基金Supported by National Natural Science Foundation of China (No. 60973079)Natural Science Foundation of Hebei Province (No. E2006000039)
文摘The representation method of heterogeneous material information is one of the key technologies of heterogeneous object modeling, but almost all the existing methods cannot represent non-uniform rational B-spline （NURBS） entity. According to the characteristics of NURBS, a novel data structure, named NURBS material data structure, is proposed, in which the geometrical coordinates, weights and material coordinates of NURBS heterogene- ous objects can be represented simultaneously. Based on this data structure, both direct representation method and inverse construction method of heterogeneous NURBS objects are introduced. In the direct representation method, three forms of NURBS heterogeneous objects are introduced by giving the geometry and material information of con- trol points, among which the homogeneous coordinates form is employed for its brevity and easy programming. In the inverse construction method, continuous heterogeneous curves and surfaces can he obtained by interpolating discrete points and curves with specified material information. Some examples are given to show the effectiveness of the pro- posed methods.
文摘This paper describes the analysis of the thermal stress concentration and the effects of geometrical shape in the interfacial edge by FEM. It is shown that the elevated stress in a dissimilar material caused by temperature is only restricted in a minor region of the interfacial edge, where the stress peak value and and the stress gradient are high. It is also found that narrowing the boundary angle can effectively reduce the peak value of stress components on the interfacial layer, especially the peeling stress σ y , which is a condition of the debonding failure in the interface.θ=60, an obvious variation, proves that selecting a reasonable edge geometrical shape helps to reduce the value of the maximum stress. At last the methods of relaxing stress concentration and effects of the geometric blunt are also discussed.
文摘The steady two-dimensional flow of Powell-Eyring fluid is investigated. The flow is caused by a stretching surface with homogeneous-heterogeneous reactions. The governing nonlinear differential equations are reduced to the ordinary differential equations by similarity transformations. The analytic solutions are presented in series forms by homotopy analysis method(HAM). Convergence of the obtained series solutions is explicitly discussed. The physical significance of different parameters on the velocity and concentration profiles is discussed through graphical illustrations. It is noticed that the boundary layer thickness increases by increasing the Powell-Eyring fluid material parameter(ε) whereas it decreases by increasing the fluid material parameter(δ). Further, the concentration profile increases when Powell-Eyring fluid material parameters increase. The concentration is also an increasing function of Schmidt number and decreasing function of strength of homogeneous reaction. Also mass transfer rate increases for larger rate of heterogeneous reaction.
