期刊文献+
共找到8篇文章
< 1 >
每页显示 20 50 100
双重异质结构对AZ91挤压板力学性能的影响 被引量:2
1
作者 刘帅帅 杨邦鹏 +5 位作者 黄光胜 陈先华 汤爱涛 蒋斌 郑开宏 潘复生 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2023年第4期1086-1097,共12页
研究晶粒尺寸和析出相的双重异质结构对小挤压比制备的AZ91挤压板材力学性能的影响。与挤压比(ER)为12.8的样品(即ER12.8样品)相比,ER3.9和ER6.4样品呈现明显的粗细晶粒层和异质分布的细小弥散的析出相。此外,在ER3.9样品的细晶层中还... 研究晶粒尺寸和析出相的双重异质结构对小挤压比制备的AZ91挤压板材力学性能的影响。与挤压比(ER)为12.8的样品(即ER12.8样品)相比,ER3.9和ER6.4样品呈现明显的粗细晶粒层和异质分布的细小弥散的析出相。此外,在ER3.9样品的细晶层中还观察到大量带状析出相。由于异质变形诱导(HDI)力和析出相的平衡,ER6.4样品呈现良好的强度和塑性结合。尽管ER3.9样品表现出最高的HDI力和基面滑移施密特因子,改善了塑性,但更多的带状析出相对恶化其力学性能仍起主导作用。 展开更多
关键词 AZ91合金 双重异质结构 析出相 力学性能 异质变形诱导(HDI)力
下载PDF
层间硬度比对Cu-Be/Cu层状异构复合材料强韧性的影响
2
作者 柳春林 唐延川 +3 位作者 张庆祝 秦新宝 郎鹏江 张欣磊 《有色金属科学与工程》 CAS 北大核心 2024年第1期67-79,共13页
通过真空热压复合、冷轧及热处理的方式制备了具有不同层间硬度比(R_(Cu-Be/Cu)分别为3.0、5.0、7.0)的Cu-Be/Cu层状异构复合材料。研究了层间硬度比R_(Cu-Be/Cu)对复合材料强度-塑性匹配及应变硬化率的影响,探索了不同R_(Cu-Be/Cu)下... 通过真空热压复合、冷轧及热处理的方式制备了具有不同层间硬度比(R_(Cu-Be/Cu)分别为3.0、5.0、7.0)的Cu-Be/Cu层状异构复合材料。研究了层间硬度比R_(Cu-Be/Cu)对复合材料强度-塑性匹配及应变硬化率的影响,探索了不同R_(Cu-Be/Cu)下异质变形诱导强化对复合材料应变硬化行为的影响。研究结果表明,随着R_(Cu-Be/Cu)升高,层状异构复合材料的抗拉强度升高、均匀伸长率降低,但复合材料抗拉强度均高于依据混合定律计算值,且均匀伸长率均高于相应Cu-Be组元,其中R_(Cu-Be/Cu)为5.0的复合材料具有最优强度-塑性匹配。异质变形诱导强化作用可使层状异构复合材料中产生额外应变硬化,但R_(Cu-Be/Cu)为3.0的复合材料中异质变形诱导强化产生的应变硬化作用较弱,而R_(Cu-Be/Cu)为7.0的复合材料中异质变形诱导硬化作用在塑性变形初期就达到饱和状态并迅速降低,R_(Cu-Be/Cu)为5.0的复合材料中异质变形诱导硬化在材料应变硬化过程中占据主导作用,且可在较大应变范围内为材料提供额外应变硬化能力。 展开更多
关键词 层状异构复合材料 层间硬度比 力学性能 应变硬化 异质变形诱导强化
下载PDF
引入梯度双模态组织提升挤压态AZ31棒材的拉伸性能
3
作者 尚琦 吴凡 +5 位作者 陈红兵 张红菊 刘婷婷 郭宁 郭胜锋 宋波 《Transactions of Nonferrous Metals Society of China》 SCIE EI CSCD 2023年第12期3673-3684,共12页
利用350℃下的往复扭转制备具有梯度双模态显微组织的镁合金棒。详细研究双模态显微组织对合金拉伸性能和变形机制的影响。梯度双模态显微组织的形成归因于不完全动态再结晶和扭转变形的特点。双模态结构对屈服强度的影响较小,但极大增... 利用350℃下的往复扭转制备具有梯度双模态显微组织的镁合金棒。详细研究双模态显微组织对合金拉伸性能和变形机制的影响。梯度双模态显微组织的形成归因于不完全动态再结晶和扭转变形的特点。双模态结构对屈服强度的影响较小,但极大增加了峰值应力和拉伸延展性。由梯度双模态显微组织产生的大异质变形诱导的强化是应变硬化能力和拉伸延展性提升的原因。最后,讨论了相关的变形机制。 展开更多
关键词 镁合金 热扭转 双模态显微组织 异质变形 拉伸性能
下载PDF
控制挤压比制备的AZ91异构镁合金的组织与力学性能 被引量:4
4
作者 刘珂 张宝煊 +3 位作者 黄光胜 蒋斌 汤爱涛 潘复生 《材料导报》 EI CAS CSCD 北大核心 2022年第20期191-197,共7页
以商业热轧态AZ91厚板为实验用材料,通过控制挤压比制备了具有异质结构和均匀结构的AZ91棒材,采用光学显微镜(OM)、扫描电子显微镜(SEM)、电子背散射衍射(EBSD)及万能试验机研究了其微观组织与拉伸性能。结果表明:相比于原始热轧态(R)... 以商业热轧态AZ91厚板为实验用材料,通过控制挤压比制备了具有异质结构和均匀结构的AZ91棒材,采用光学显微镜(OM)、扫描电子显微镜(SEM)、电子背散射衍射(EBSD)及万能试验机研究了其微观组织与拉伸性能。结果表明:相比于原始热轧态(R)和轧制退火态(RA),挤压后的合金(AE7、AE11、AE17和AE26,数字为挤压比)的强度和塑性均大幅提高。其中,AE7为晶粒较为细小的均匀组织,并具有最高的抗拉强度及屈服强度,但塑性最差;而AE26则呈现晶粒较为粗大的均匀组织,并具有最佳的塑性,但强度最低;AE11和AE17则呈现粗、细晶混合的异质结构,其中AE11表现最佳的强韧结合,这不仅归因于细晶强化和晶粒的硬取向,而且异质变形诱导(HDI)强化和硬化在变形过程中也扮演了重要角色。 展开更多
关键词 镁合金 微观组织 异质结构 异质变形诱导(HDI)强化 力学性能
下载PDF
Effects of axial cyclic loading at constant confining pressures on deformational characteristics of anisotropic argillite 被引量:2
5
作者 张久长 周苏华 +1 位作者 方理刚 许湘华 《Journal of Central South University》 SCIE EI CAS 2013年第3期799-811,共13页
Triaxial cyclic loading tests have been performed to assess the influence of plastic deformation on inelastic deformational properties of anisotropic argillite with bedding planes which is regarded as a kind of transv... Triaxial cyclic loading tests have been performed to assess the influence of plastic deformation on inelastic deformational properties of anisotropic argillite with bedding planes which is regarded as a kind of transversely isotropic media.Considering argillite's anisotropy and inelastic deformational properties,theoretical formulae for calculating oriented elastic parameters were deduced by the unloading curves,which can be better fitted for the description of its elasticity than loading curves.Test results indicate that with the growth of accumulated plastic,strain,the apparent elastic modulus of argillite decreases in a form of exponential decay function,whereas the apparent Poisson ratio increase in a form of power equation.A ratio of unloading recoverable strain to the total strain increment occurred during a loading cycle is defined to illustrate the characteristic relations between anisotropic coupled elasto-plastic deformation and plastic strain.It is significant to observe that high stress level and plastic history have an inhibiting effect on argillite anisotropy. 展开更多
关键词 anisotropic argillite coupled elasto-plasticity cyclic loading tests elastic parameters plastic strain
下载PDF
The role of volatiles and coal structural variation in coal methane adsorption 被引量:3
6
作者 孙文晶 王宁 +1 位作者 储伟 江成发 《Science Bulletin》 SCIE EI CAS CSCD 2015年第5期532-540,共9页
We investigated the role of volatiles in the porous structure of coal samples and the corresponding structural deformations that affect the coals' methane adsorption capacity. For this study, the volatiles in coal we... We investigated the role of volatiles in the porous structure of coal samples and the corresponding structural deformations that affect the coals' methane adsorption capacity. For this study, the volatiles in coal were gradually removed by extraction. Changes in the crystal, textural, and porous structures were identified by means of thermogravimetric analysis, X-ray diffraction, and N2 adsorption/desorption. Changes in the methane adsorption behavior before and after volatile removal were investigated. It was found that changes in methane adsorption could be attributed to volatile-related deformations in the coal's porous structure. Microstructural characterizations indicated that the volatiles could be found in two states within the coal, either trapped in the pores, or cross-linked in the network. The former played an important role in constructing the pore spaces and walls within the coal and affected the accessibility of gases. The latter cross-linked state retained the volatiles within the macromolecular coal structural network. This state affected coal-coal interactions, which was a factor that controlled the crystal structure of coal and contributed to the number of porous deformations. 展开更多
关键词 COAL Volatile components Structural deformations Aggregation state Methane adsorption
原文传递
Structural heterogeneity and deformation rheology in metallic glasses 被引量:2
7
作者 KE HaiBo LIU ChainTsuan YANG Yong 《Science China(Technological Sciences)》 SCIE EI CAS CSCD 2015年第1期47-55,共9页
The atomic structure and associated deformation behavior of metallic glasses(MGs)have been long standing issues.Although recent computational/experimental results indicate that the structure of MGs is heterogeneous at... The atomic structure and associated deformation behavior of metallic glasses(MGs)have been long standing issues.Although recent computational/experimental results indicate that the structure of MGs is heterogeneous at the nano scale,the fundamental knowledge of the atomic basis for such structural heterogeneity and its impact on the overall properties of MGs is still lacking.We reviewed recent research on unraveling the structure heterogeneity in MGs,with emphases on the use of dynamic atomic force microscopy,the characterization of glass anelasticity by nanoindentation,and the establishment of numerous correlations with structural heterogeneity. 展开更多
关键词 bulk metallic glasses RHEOLOGY ANELASTICITY structure heterogeneity amorphous structure
原文传递
Oblate Superdeformed High-K States in Superheavy Nuclei
8
作者 刘红亮 《Communications in Theoretical Physics》 SCIE CAS CSCD 2013年第11期577-580,共4页
Configuration-constrained calculations of potential-energy surfaces for ^292 122 show the occurrence of multiquasiparticle high-K isomeric state at oblate superdeformation. Such state could play a unique role in super... Configuration-constrained calculations of potential-energy surfaces for ^292 122 show the occurrence of multiquasiparticle high-K isomeric state at oblate superdeformation. Such state could play a unique role in superheavy nuclei, with possible long life time from enhanced difficulty in fission due to additional barrier at oblate deformation, retardation in a decay due to unpaired nucleons, and hindrance in γ-ray transition due to K forbiddenness. 展开更多
关键词 oblate deformation SUPERDEFORMATION K isomer superheavy nucleus
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部