筐形保持架扩张模的解析设计法

针对作图法设计扩张模的缺点，通过对多种型号模具的测试、分析，归纳出有关参数的合理取值，推导出扩张模的解析法设计用公式。实践表明，解析法设计的扩张模精度高，质量好，而且，设计效率也高。附图３幅。

李珏、张模考辨——关于陈致虚师承的探究之一

本文考察上阳子陈致虚的祖师李珏、张模的相关情况,着重对张模与德兴张氏、张模与《西游证道书》、李珏—陈致虚一系依附全真道等问题进行了辨正,目的在于进一步厘清陈致虚传派的渊源。

虞集《西游记》序言和《西游记》在元代形成的文化背景

日本学者太田辰夫发现《西游记》有不止一首诗词出自元代全真教诗词集《鸣鹤余音》,故对后者与《西》书创作的关系应予注意。从《余音》内容看,它是元代全真人士把自己的教义"嫁接"到"唐僧取经"故事框架上的诗词工具书之一,构成了《西》书创作的一个美学背景。以此为基本前提考虑,由于元代著名文人虞集"学道"诗词是《余音》重点收录对象且虞也曾为它写序,也由于虞集与全真道士的密切关系和对后者遭遇焚经厄运的同情,更由于序文所涉及人物在《余音》中可寻端倪以及时限合理等原因,虞撰全真教《西游记》稿本之序,虽所持"丘处机作者说"不可信,但它对全真教《西游记》书稿创作主旨的揭示应当可信。

Mechanical model for failure modes of rock and soil under compression

The failure modes of rock and soil under compression are complex phenomena that have not been explained in a mechanical perspective. However, large amounts of studies indicate that the failure modes of rock and soil samples can be categorized into eight types. In this work, the inner tensile stress and the dissipation and conversion of energy of rock and soil under compression are analyzed, then the effective conversion coefficient of energy is deduced, thus the tensile failure criterion of rock and soil under compression is established. Combined with the shear strength criterion of Mohr–Coulomb, a tensile joint shear strength criterion for rock and soil under compression is built. Therefore, a mechanical criterion model concerning the failure modes of rock and soil under compression is established and verified by tests. This model easily explains the test results in the existing literature and many natural phenomena, such as collapse.

Making the category of entwined modules into a braided monoidal category

The question of how the category of entwined modules can be made into a braided monoidal category is studied. First, the sufficient and necessary conditions making the category into a monoidal category are obtained by using the fact that if （A, C, ψ） is an entwining structure, then A × C can be made into an entwined module. The conditions are that the algebra and coalgebra in question are both bialgebras with some extra compatibility relations. Then given a monodial category of entwined modules, the braiding is constructed by means of a twisted convolution invertible map Q, and the conditions making the category form into a braided monoidal category are obtained similarly. Finally, the construction is applied to the category of Doi-Hopf modules and （α, β ）-Yetter-Drinfeld modules as examples.

Fuzzy disturbance rejection predictive control of ultra-supercritical once-through boiler-turbine unit

In order to overcome the wide-range load tracking and unknown disturbance issues of an ultra-supercritical boiler- turbine unit, a fuzzy disturbance rejection predictive control approach is proposed using the techniques of fuzzy scheduling, model predictive control and extended state observer. Local state-space models are established on the basis of nonlinearity analysis and subspace identification. To eiJiance thedisturbance rejection capability of the controller, a extended state observer is employed to estimate unnown disturbances and model mismatches. The disturbance estimation ennaced local predictive controllers ae subsequently devised based on the local models, the performance of which is further strengthened by incorporating the fuzzy scheduling technique. The simulation results verify the merits of the proposed strategy in achieving satisfactory wide-range load tracking ad disturbance rejection performance.

一种地形图航片转刺方法——透明纸辐射线交会法

森林资源调查、林区规划设计或者科学研究试验等工作,常常离不开地形图。随着科技的不断发展,航空象片与地形图的结合使用越来越普遍。有的工作布点在地形图上,而存档又需要在航片上;现地工作(检查)找点时常常需要航片配合。

Calculating models on surface tension of RE_2O_3-Mg O-SiO_2(RE=La, Nd, Sm, Gd and Y) melts

A thermodynamic model was developed for determining the surface tension of RE2O3-MgO-SiO2(RE=La, Nd, Sm, Gd and Y) melts considering the ionic radii of the components and Butler's equation. The temperature and composition dependence of the surface tensions in molten RE2O3-MgO-SiO2 slag systems was reproduced by the present model using surface tensions and molar volumes of pure oxides, as well as the anionic and cationic radii of the melt components. The iso-surface tension lines of La2O3-MgO-SiO2 slag melt at 1873 K were calculated and the effects of slag composition on the surface tension were also investigated. The surface tensions of La2O3, Gd2O3, Nd2O3 and Y2O3 at 1873 K were evaluated as 686, 677, 664 and 541 m N/m, respectively. The surface tension of pure rare earth oxide melts linearly decreases with increasing cationic field strength, except for Y2O3 oxide, while Y2O3 has a much weaker surface tension. The evaluated results of the surface tension show good agreements with literature data, and the mean deviation of the present model is found to be 1.05% at 1873 K.

Meta-projective Modules, Tensor Products and Limits

In this paper twe prove that the inverse limit of metra-projective modules (meta-injective modules resp. ) is also meta-projective (meta-injective resp. ). Let K be a field f R1, R2 be K-algebras, we also obtain a sufficient condition for lgldim (R1 R2,)≥lgldim R1+lgldimR2, and wgldim (R1 R2) ≥wgldimR1 +wgldimR2

Acoustic emission activity in directly tensile test on marble specimens and its tensile damage constitutive model

For understanding acoustic emission （AE） activity and accumulation of micro-damage inside rock under pure tensile state, the AE signals has been monitored on the test of directly tension on two kinds of marble specimens. A tensile constitutive model was proposed with the damage factor calculated by AE energy rate. The tensile strength of marble was discrete obviously and was sensitive to the inside microdefects and grain composition. With increasing of loading, the tensile stress-strain curve obviously showed nonlinear with the tensile tangent modulus decreasing. In repeated loading cycle, the tensile elastic modulus was less than that in the previous loading cycle because of the generation of micro damage during the prior loading. It means the linear weakening occurring in the specimens. The AE activity was corresponding with occurrence of nonlinear deformation. In the initial loading stage which only elastic deformation happened on the specimens, there were few AE events occurred; while when the nonlinear deformation happened with increasing of loading, lots of AE events were generated. The quantity and energy of AE events were proportionally related to the variation of tensile tangent modulus. The Kaiser effect of AE activity could be clearly observed in tensile cycle loading. Based on the theory of damage mechanics, the damage factor was defined by AE energy rate and the tensile damage constitutive model was proposed which only needed two property constants. The theoretical stress-strain curve was well fitted with the curve plotted with tested datum and the two property constants were easily gotten by the laboratory testing.

EXPERIMENTAL STUDY ON A DYNAMIC ASYMMETRICAL TYPHOON INITIALIZATION SCHEME BASED ON 4D-VAR

Axisymmetric bogus vortexes at sea level are usually used in the traditional bogus data assimilation （BDA） scheme. In the traditional scheme, the vortex could not accurately describe the specific characteristics of a typhoon, and the evolving real typhoon is forced to unreasonably adapt to this changeless vortex. For this reason, an asymmetrical typhoon bogus method with information blended from the analysis and the observation is put forward in this paper, in which the impact of the Subtropical High is also taken into consideration. With the fifth-generation Penn State/NCAR Mesoscale Model （MM5） and its adjoint model, a four-dimensional variational data assimilation （4D-Var） technique is employed to build a dynamic asymmetrical BDA scheme to assimilate different asymmetrical bogus vortexes at different time. The track and intensity of six surmner typhoons much influenced by the Subtropical High are simulated and the results are compared. It is shown that the improvement in track simulation in the new scheme is more significant than that in the traditional scheme. Moreover, the periods for which the track cannot be simulated well by the traditional scheme can be improved with the new scheme. The results also reveal that although the simulated typhoon intensity in the new scheme is generally weaker than that in the traditional scheme, this trend enables the new scheme to simulate, in the later period, closer-to-observation intensity than the traditional scheme. However, despite the fact that the observed intensity has been largely weakened, the simulated intensity at later periods of the BDA schemes is still very intensive, resulting in overly development of the typhoon during the simulation. The limitation to the simulation effect of the BDA scheme due to this condition needs to be further studied.

A Surface Tension Model for Liquid Mixtures Based on NRTL Equation

A new equation for predicting surface tension is proposed based on the thermodynamic definition of surface tension and the expression of the Gibbs free energy of the system. Using the NRTL equation to represent the excess Gibbs free energy, a two-parameter surface tension equation is derived. The feasibility of the new equation has been tested in terms of 124 binary and 16 multicomponent systems(13-ternary and 3-quaternary) with absolute relative deviations of 0.59% and 1.55% respectively. This model is also predictive for the temperature dependence of surface tension of liquid mixtures. It is shown that, with good accuracy, this equation is simple and reliable for practical use.

Determination of Key Cohesive Zone Model’s Parameters for Orthotropic Paper and Its Static Fracture Simulation

Investigation of paper cutting process is vital for the design of cutting tools,but the fracture mechanism of paper cutting is still unclear.Here,we focus on the cutting process of paper,including the key parameters of cohesive zone model(CZM)for the orthotropic paper,to simulate the shear fracture process.Firstly,the material constants of the orthotropic paper are determined by longitudinal and transverse tensile test.Secondly,based on the tensile stressstrain curves,combined with damage theory and numerical simulations,the key parameters of the CZM for the orthotropic paper are obtained.Finally,a model III fracture is simulated to verify the accuracy of the model.Results show that the load-displacement curves obtained by the simulation is consistent with the test results.

Phosphatase and Tension Homolog Overexpression in Insulin Resistant Diabetic Adipose Tissue

Objective To investigate the expression of phosphatase and tension homolog(PTEN) in adipose tissue of KKAy diabetic mice, a mouse model of type 2 diabetes. Methods KKAy diabetic mice were fed with high fat diet for 4 weeks. After blood glucose met the criteria of diabetes(over 16.7 mmol/L), mice were randomly divided into 3 groups: a control group(without any treatment), a rosiglitazone group(treated with rosiglitazone 12.5 mg/kg·d once per day), and a metformin group(treated with metformin 3 g/kg·d twice daily). After 4 weeks, we then determined the expression of PTEN and phosphoserine 473-Akt(pS473-Akt) in the epididymal adipose tissue with Western blots. The mice in each group were further divided into the insulin(-) subgroup and insulin(+) subgroup, which were intraperitoneally injected with saline and insulin(5 mU/g body weight), respectively. Results The expression of PTEN was elevated in the epididymal adipose tissue obtained from KKAy diabetic mice compared with that from the C57BL/6J mice(P<0.001). In accordance with the enhanced expression of PTEN, the level of pS473-Akt stimulated by insulin was decreased in the adipose tissue of KKAy mice compared to the C57BL/6J mice(P<0.001). Treatment with the insulin-sensitizing agents, rosiglitazone and metformin did not inhibit the elevated expression of PTEN in adipose tissue of KKAy diabetic mice. Conclusion PTEN may play an important role in the development of insulin resistance in adipose tissue of type 2 diabetes mice model.

Effect of starch particles on foam stability and dilational viscoelasticity of aqueous-foam

Surface dilational rheological behavior and foam stability of starch/surfactant mixed solutions were studied at different starch concentrations and constant surfactant concentration. The results show that dilational viscoelasticity modulus, dilational elasticity modulus and dilational viscosity modulus increase with the concentration of starch particles. Foam stability increases with dilational viscoelasticity. Foam strength also increases with starch concentration. Starch particles play a positive effect on foam stability and dilational viscoelasticity and the effect becomes more significant as drainage proceeds. Film pictures indicate that the film with 20%(by mass) starch particles is thicker than that without starch. Starch particles gather in Plateau border and resist drainage, making the foam more stable.

Simulation on model predictive control for PMSM drive system based on double extended state observer

A novel double extended state observer(DESO)based on model predictive torque control(MPTC)strategy is developed for three-phase permanent magnet synchronous motor(PMSM)drive system without current sensor.In general,to achieve high-precision control,two-phase current sensors are necessary for successful implementation of MPTC.For this purpose,two ESOs are used to estimate q-axis current and stator resistance respectively,and then based on this,d-axis current is estimated.Moreover,to reduce torque and flux ripple and to improve the performance of the torque and speed,MPTC strategy is designed.The simulation results validate the feasibility and effectiveness of the proposed scheme.

Analysis of Three-dimensional Crack Propagation by Using Displacement Discontinuity Method

A technique for modelling of three-dimensional(3D)quasi-statically propagating cracks in elastic bodies by the displacement discontinuity method(DDM)was described.When the crack is closed,the Mohr-coulomb rule on the two contacted surfaces of the crack must be satisfied.A simple iterative method was adopted in order to consider three different states of cracks.Under the assumption that the advance of the point on the crack front would occur only in the normal plane which is through this edge point,the maximum energy release rate criterion is modified to be used as the criterion for the crack growth.With discretization,the process of crack propagation can be seen as the advance of the vertices of the crack front.The program MCP3D was developed based on these theories to simulate the 3D quasi-static crack propagation.A numerical example of a penny-shaped crack subject to tension and compression in an infinite elastic media was analyzed with MCP3D,and the results in comparison with others' show that the present method for 3D crack propagation is effective.

Models of Presence and Loss of Transcendence in History

The article seeks to elucidate the status of transcendence in the historiography of secularization through the perspective of collective memory. It discusses two typological models dealing with the basic metaphysical problem concerned with the presence and meaning of transcendence in real human existence. According to the first, the historical reality of secularization causes a break from the collective memory whose roots are in religion. In contrast, the second model considers that despite the deep transformations in the status of religion in a reality of secularization, an experience of historical continuity may also occur there. These models denote the two poles in the argument about the meaning and value of history for modem people. The article suggests a phenomenological analysis of the two models and criticizes their deficiencies. Finally, the ＂tension model＂ is outlined as a third alternative that aims at overcoming the binary situation created by the first two in favor of a perspective that necessitates and contains both immanence and transcendence.