Materials with the same elastic modulus E and representative stress and strain （σr,εr） present similar indentation-loading curves, whatever the value of strain hardening exponent n. Based on this definition, a goo...Materials with the same elastic modulus E and representative stress and strain （σr,εr） present similar indentation-loading curves, whatever the value of strain hardening exponent n. Based on this definition, a good approach was proposed to extract the plastic properties or constitutive equations of metals from nanoindentation test combining finite element simulation. Firstly, without consideration of strain hardening, the representative stress was determined by varying assumed representative stress over a wide range until a good agreement was reached between the computed and experimental loading curves. Similarly, the corresponding representative strain was determined with different hypothetical values of strain hardening exponent in the range of 0-0.6. Through modulating assumed strain hardening exponent values to make the computed unloading curve coincide with that of the experiment, the real strain hardening exponent was acquired. Once the strain hardening exponent was determined, the initial yield stress ay of metals could be obtained by the power law constitution. The validity of the proposed methodology was verified by three real metals： AISI 304 steel, Fe andA1 alloy.展开更多
This paper describes a general model for the mechanical behavior studying of general wire rope strand. An exact solution of the deformation characteristics was given when the strands is under tensile and torsional loa...This paper describes a general model for the mechanical behavior studying of general wire rope strand. An exact solution of the deformation characteristics was given when the strands is under tensile and torsional loads. The theoretical results are useful in evaluating the extensional and torsional moduli of rigidity for the strands. Finally, a simple design criterion is establised for the nonrotating ropes.展开更多
基金Project （51171125） supported by the National Natural Science Foundation of China Project （20110321051 ） supported by the Science and Technology Key Project of Shanxi Province, China
文摘Materials with the same elastic modulus E and representative stress and strain （σr,εr） present similar indentation-loading curves, whatever the value of strain hardening exponent n. Based on this definition, a good approach was proposed to extract the plastic properties or constitutive equations of metals from nanoindentation test combining finite element simulation. Firstly, without consideration of strain hardening, the representative stress was determined by varying assumed representative stress over a wide range until a good agreement was reached between the computed and experimental loading curves. Similarly, the corresponding representative strain was determined with different hypothetical values of strain hardening exponent in the range of 0-0.6. Through modulating assumed strain hardening exponent values to make the computed unloading curve coincide with that of the experiment, the real strain hardening exponent was acquired. Once the strain hardening exponent was determined, the initial yield stress ay of metals could be obtained by the power law constitution. The validity of the proposed methodology was verified by three real metals： AISI 304 steel, Fe andA1 alloy.
文摘This paper describes a general model for the mechanical behavior studying of general wire rope strand. An exact solution of the deformation characteristics was given when the strands is under tensile and torsional loads. The theoretical results are useful in evaluating the extensional and torsional moduli of rigidity for the strands. Finally, a simple design criterion is establised for the nonrotating ropes.
