Elemental titanium(Ti)and nickel(Ni)powders were consolidated by spark plasma sintering(SPS)to fabricate Ti-51%Ni(mole fraction)shape-memory alloys(SMAs).The objective of this study is to enhance the superelasticity o...Elemental titanium(Ti)and nickel(Ni)powders were consolidated by spark plasma sintering(SPS)to fabricate Ti-51%Ni(mole fraction)shape-memory alloys(SMAs).The objective of this study is to enhance the superelasticity of SPS produced Ti-Ni alloy using free forging as a secondary process.Products from two processes(with and without free forging)were compared in terms of microstructure,transformation temperature and superelasticity.The results showed that,free forging effectively improved the tensile and shape-memory properties.Ductility increased from 6.8%to 9.2%after forging.The maximum strain during superelasticity increased from 5%to 7.5%and the strain recovery rate increased from 72%to 92%.The microstructure of produced Ti-51%Ni SMA consists of the cubic austenite(B2)matrix,monoclinic martensite(B19′),secondary phases(Ti3Ni4,Ti2Ni and TiNi3)and oxides(Ti4Ni2O and Ti3O5).There was a shift towards higher temperatures in the martensitic transformation of free forged specimen(aged at 500°C)due to the decrease in Ni content of B2 matrix.This is related to the presence of Ti3Ni4 precipitates,which were observed using transmission electron microscope(TEM).In conclusion,free forging could improve superelasticity and mechanical properties of Ti-51%Ni SMA.展开更多
The purposes of this work were to obtain the accurate elastic modulus of the nanocrystalline WC-Co cemented carbides, and to propose the mechanism for the difference of elastic modulus between the nanocrystalline and ...The purposes of this work were to obtain the accurate elastic modulus of the nanocrystalline WC-Co cemented carbides, and to propose the mechanism for the difference of elastic modulus between the nanocrystalline and conventional polycrystalline cemented carbides. The nanocrystalline cemented carbide was prepared by spark plasma sintering（SPS） technique. The conventional polycrystalline cemented carbides were prepared by SPS and sinter-HIP techniques as references, respectively. The sintered cemented carbides were characterized by X-ray diffractometry, scanning electron microscopy and the transmission electron microscopy with precession electron diffraction technology. The elastic modulus was obtained by averaging the values measured with the continuous stiffness measurement method of the nanoindentation technology. The results show that the nanocrystalline cemented carbide has a relatively low modulus, which could be attributed to the more interface area and higher fraction ratio of the hcp cobalt phase caused by the rapid heating and cooling process during SPS.展开更多
China＇s energy carbon emissions are projected to peak in 2030 with approximately 110% of its 2020 level under the following conditions： 1） China＇s gross primary energy consumption is 5 Gtce in 2020 and 6 Gtce in 2...China＇s energy carbon emissions are projected to peak in 2030 with approximately 110% of its 2020 level under the following conditions： 1） China＇s gross primary energy consumption is 5 Gtce in 2020 and 6 Gtce in 2030; 2） coal＇s share of the energy consumption is 61% in 2020 and 55% in 2030; 3） non-fossil energy＇s share increases from 15% in 2020 to 20% in 2030; 4） through 2030, China＇s GDP grows at an average annual rate of 6%; 5） the annual energy consumption elasticity coefficient is 0.30 in average; and 6） the annual growth rate of energy consumption steadily reduces to within 1%. China＇s electricity generating capacity would be 1,990 GW, with 8,600 TW h of power generation output in 2020. Of that output 66% would be from coal, 5% from gas, and 29% from non-fossil energy. By 2030, electricity generating capacity would reach 3,170 GW with 11,900 TW h of power generation output. Of that output, 56% would be from coal, 6% from gas, and 37% from non-fossil energy. From 2020 to 2030, CO2 emissions from electric power would relatively fall by 0.2 Gt due to lower coal consumption, and rela- tively fall by nearly 0.3 Gt with the installation of more coal-fired cogeneration units. During 2020--2030, the portion of carbon emissions from electric power in China＇s energy consumption is projected to increase by 3.4 percentage points. Although the carbon emissions from electric power would keep increasing to 118% of the 2020 level in 2030, the electric power industry would continue to play a decisive role in achieving the goal of increase in non-fossil energy use. This study proposes countermeasures and recommendations to control carbon emissions peak, including energy system optimization, green-coal-fired electricity generation, and demand side management.展开更多
The present paper analyzes historically the relationship between carbon emission and economic development by different stages through adopting elastic decoupling methods and Tapio evaluation criteria along with a comp...The present paper analyzes historically the relationship between carbon emission and economic development by different stages through adopting elastic decoupling methods and Tapio evaluation criteria along with a comparison with the national Five Year Plans. The analysis shows that the influencing factors to the relationship between carbon emission and economy in China are different, and economic development and carbon emission have less connection in the recent 30 years of reform and opening-up in China. It is a difficult task to realize the promise that we will reduce carbon emission by 40%-50% in 2020 based on the data from historical experience and different expectations for economic development from economists. Through constructing the calcula- tion model of carbon emission intensity gap according to different development scenarios, the analysis shows that economic growth, infrastructure investment and further development of industrial-ization are the main drivers to the increase of carbon emission, technological progress, and particularly, the reduction of energy consumption is the primary means to reduce carbon emission in China. It is imperative to transform the economic growth pattern, and it is a grand task to perform and there is a long way to go for China to maintain economic growth and reduce carbon intensity.展开更多
Tetraphenylethene (TPE) is a popular luminogen characterized by aggregation-induced emission and has been widely used to construct solid-state emissive materials. In this work, two thermally stable polymers (P1 and P2...Tetraphenylethene (TPE) is a popular luminogen characterized by aggregation-induced emission and has been widely used to construct solid-state emissive materials. In this work, two thermally stable polymers (P1 and P2) consisting of TPE conjugated to the 2,7-positions of fluorene and carbazole, respectively, are synthesized and characterized. Both polymers are weakly fluorescent in solutions but show greatly enhanced emission as the aggregate formation, presenting an aggregation-enhanced emission feature. Two kinds of polymer light-emitting diodes are fabricated utilizing P1 and P2 as emitters (EML) (device I: ITO/PEDOT:PSS (45 nm)/PVK:EML (1:1 wt%, 55 nm)/TPBI (38 nm)/Ca:Ag; device II: ITO/PEDOT:PSS (45 nm)/ PVK:OXD-7:EML (3:1:3 wt%, 55 nm)/TPBI (38 nm)/Ca:Ag). The device II of P2 shows the best performances, affording a maximum luminance of 6500 cd/m 2 and a high peak efficiency of 2.11 cd/A.展开更多
Monitoring telomerase activity with high sensitive and reliable is of great importance to cancer analysis. In this paper, we report a sensitive and facile method to detect telomerase activity using AIEgens mod- ified ...Monitoring telomerase activity with high sensitive and reliable is of great importance to cancer analysis. In this paper, we report a sensitive and facile method to detect telomerase activity using AIEgens mod- ified probe （TPE-Py-DNA） as a fluorescence reporter and exonuclease llI （Exo lIl） as a signal amplifier. With the aid of telomerase, repeat units （TrAGGG）n are extended from the end of template substrate oligonucleotides （TS primer） that form duplex DNAs with TPE-Py-DNA. Then, Exo llI catalyzes the diges- tion of duplex DNAs, liberating elongation product and releasing hydrophobic TPE-Py. The released hydrophobic TPE-Py aggregate together and produce a telomerase-activity-related fluorescence signal. The liberated product hybridizes with another TPE-Py-DNA probe, starting the second cycle. Finally, we obtain the target-to-signal amplification ratio of 1 ：N2. This strategy exhibits good performance for detecting clinical urine samples （distinguishing 15 cancer patients＇ samples from 8 healthy ones） and checking intracellular telomerase activity （differentiating cell lines including HeLa, MDA-MB-231, MCF-7, A375, HLF and MRC-5 from the cells pretreated with telomerase-related drug）, which shows its potential in clinical diagnosis as well as therapeutic monitoring of cancer.展开更多
基金the Ministry of Higher Education of Malaysia for the Malaysian International Scholarship and research funding under FRGS vote No. R.J13000.7824.4F810
文摘Elemental titanium(Ti)and nickel(Ni)powders were consolidated by spark plasma sintering(SPS)to fabricate Ti-51%Ni(mole fraction)shape-memory alloys(SMAs).The objective of this study is to enhance the superelasticity of SPS produced Ti-Ni alloy using free forging as a secondary process.Products from two processes(with and without free forging)were compared in terms of microstructure,transformation temperature and superelasticity.The results showed that,free forging effectively improved the tensile and shape-memory properties.Ductility increased from 6.8%to 9.2%after forging.The maximum strain during superelasticity increased from 5%to 7.5%and the strain recovery rate increased from 72%to 92%.The microstructure of produced Ti-51%Ni SMA consists of the cubic austenite(B2)matrix,monoclinic martensite(B19′),secondary phases(Ti3Ni4,Ti2Ni and TiNi3)and oxides(Ti4Ni2O and Ti3O5).There was a shift towards higher temperatures in the martensitic transformation of free forged specimen(aged at 500°C)due to the decrease in Ni content of B2 matrix.This is related to the presence of Ti3Ni4 precipitates,which were observed using transmission electron microscope(TEM).In conclusion,free forging could improve superelasticity and mechanical properties of Ti-51%Ni SMA.
基金Projects(51425101,51631002)supported by the National Natural Science Foundation of China
文摘The purposes of this work were to obtain the accurate elastic modulus of the nanocrystalline WC-Co cemented carbides, and to propose the mechanism for the difference of elastic modulus between the nanocrystalline and conventional polycrystalline cemented carbides. The nanocrystalline cemented carbide was prepared by spark plasma sintering（SPS） technique. The conventional polycrystalline cemented carbides were prepared by SPS and sinter-HIP techniques as references, respectively. The sintered cemented carbides were characterized by X-ray diffractometry, scanning electron microscopy and the transmission electron microscopy with precession electron diffraction technology. The elastic modulus was obtained by averaging the values measured with the continuous stiffness measurement method of the nanoindentation technology. The results show that the nanocrystalline cemented carbide has a relatively low modulus, which could be attributed to the more interface area and higher fraction ratio of the hcp cobalt phase caused by the rapid heating and cooling process during SPS.
文摘China＇s energy carbon emissions are projected to peak in 2030 with approximately 110% of its 2020 level under the following conditions： 1） China＇s gross primary energy consumption is 5 Gtce in 2020 and 6 Gtce in 2030; 2） coal＇s share of the energy consumption is 61% in 2020 and 55% in 2030; 3） non-fossil energy＇s share increases from 15% in 2020 to 20% in 2030; 4） through 2030, China＇s GDP grows at an average annual rate of 6%; 5） the annual energy consumption elasticity coefficient is 0.30 in average; and 6） the annual growth rate of energy consumption steadily reduces to within 1%. China＇s electricity generating capacity would be 1,990 GW, with 8,600 TW h of power generation output in 2020. Of that output 66% would be from coal, 5% from gas, and 29% from non-fossil energy. By 2030, electricity generating capacity would reach 3,170 GW with 11,900 TW h of power generation output. Of that output, 56% would be from coal, 6% from gas, and 37% from non-fossil energy. From 2020 to 2030, CO2 emissions from electric power would relatively fall by 0.2 Gt due to lower coal consumption, and rela- tively fall by nearly 0.3 Gt with the installation of more coal-fired cogeneration units. During 2020--2030, the portion of carbon emissions from electric power in China＇s energy consumption is projected to increase by 3.4 percentage points. Although the carbon emissions from electric power would keep increasing to 118% of the 2020 level in 2030, the electric power industry would continue to play a decisive role in achieving the goal of increase in non-fossil energy use. This study proposes countermeasures and recommendations to control carbon emissions peak, including energy system optimization, green-coal-fired electricity generation, and demand side management.
文摘The present paper analyzes historically the relationship between carbon emission and economic development by different stages through adopting elastic decoupling methods and Tapio evaluation criteria along with a comparison with the national Five Year Plans. The analysis shows that the influencing factors to the relationship between carbon emission and economy in China are different, and economic development and carbon emission have less connection in the recent 30 years of reform and opening-up in China. It is a difficult task to realize the promise that we will reduce carbon emission by 40%-50% in 2020 based on the data from historical experience and different expectations for economic development from economists. Through constructing the calcula- tion model of carbon emission intensity gap according to different development scenarios, the analysis shows that economic growth, infrastructure investment and further development of industrial-ization are the main drivers to the increase of carbon emission, technological progress, and particularly, the reduction of energy consumption is the primary means to reduce carbon emission in China. It is imperative to transform the economic growth pattern, and it is a grand task to perform and there is a long way to go for China to maintain economic growth and reduce carbon intensity.
基金the National Natural Science Foundation of China (51273053, 21104012, 21284034 and 61106017)the Natural Science Foundation of Zhejiang Province (Y4110331)+1 种基金the Program for Changjiang Scholars and Innovative Research Teams in Chinese Universities (IRT 1231)the Project of Zhejiang Key Scientific and Technological Innovation Team (2010R50017)
文摘Tetraphenylethene (TPE) is a popular luminogen characterized by aggregation-induced emission and has been widely used to construct solid-state emissive materials. In this work, two thermally stable polymers (P1 and P2) consisting of TPE conjugated to the 2,7-positions of fluorene and carbazole, respectively, are synthesized and characterized. Both polymers are weakly fluorescent in solutions but show greatly enhanced emission as the aggregate formation, presenting an aggregation-enhanced emission feature. Two kinds of polymer light-emitting diodes are fabricated utilizing P1 and P2 as emitters (EML) (device I: ITO/PEDOT:PSS (45 nm)/PVK:EML (1:1 wt%, 55 nm)/TPBI (38 nm)/Ca:Ag; device II: ITO/PEDOT:PSS (45 nm)/ PVK:OXD-7:EML (3:1:3 wt%, 55 nm)/TPBI (38 nm)/Ca:Ag). The device II of P2 shows the best performances, affording a maximum luminance of 6500 cd/m 2 and a high peak efficiency of 2.11 cd/A.
基金supported by the National Natural Science Foundation of China(21375042,21405054,21525523,21574048,and21404028)the National Basic Research Program of China(2015CB932600,2013CB933000,and 2016YFF0100800)+1 种基金the Special Fund for Strategic New Industry Development of Shenzhen,China(JCYJ20150616144425376)1000 Young Talent Program(to F.Xia)
文摘Monitoring telomerase activity with high sensitive and reliable is of great importance to cancer analysis. In this paper, we report a sensitive and facile method to detect telomerase activity using AIEgens mod- ified probe （TPE-Py-DNA） as a fluorescence reporter and exonuclease llI （Exo lIl） as a signal amplifier. With the aid of telomerase, repeat units （TrAGGG）n are extended from the end of template substrate oligonucleotides （TS primer） that form duplex DNAs with TPE-Py-DNA. Then, Exo llI catalyzes the diges- tion of duplex DNAs, liberating elongation product and releasing hydrophobic TPE-Py. The released hydrophobic TPE-Py aggregate together and produce a telomerase-activity-related fluorescence signal. The liberated product hybridizes with another TPE-Py-DNA probe, starting the second cycle. Finally, we obtain the target-to-signal amplification ratio of 1 ：N2. This strategy exhibits good performance for detecting clinical urine samples （distinguishing 15 cancer patients＇ samples from 8 healthy ones） and checking intracellular telomerase activity （differentiating cell lines including HeLa, MDA-MB-231, MCF-7, A375, HLF and MRC-5 from the cells pretreated with telomerase-related drug）, which shows its potential in clinical diagnosis as well as therapeutic monitoring of cancer.
