期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
有载分接开关强制分流的应用 被引量:6
1
作者 黄宝新 张栋 黄英晓 《变压器》 北大核心 2020年第3期65-67,72,共4页
介绍了两个单相有载分接开关并联、一个两相或三相有载分接开关相间并联使用时,通过各个切换开关电流的分配,分析了电流分配不均的原因,并介绍了两种强制电流分配的方法。
关键词 有载分接开关 强制分流 切换开关
下载PDF
电力变压器的强制分流措施研究
2
作者 张计英 《变压器》 北大核心 2019年第3期11-13,共3页
分析了调压电流大的变压器设计时,有载开关的并联方式,探讨了并联支路内环流的大小及其影响因素,最后给出了变压器实现强制分流的措施。
关键词 电力变压器 有载分接开关 环流 强制分流 磁耦合
下载PDF
教育分流与职业学校升学政策的冲突与协调 被引量:3
3
作者 李红卫 《教育与职业》 北大核心 2012年第11期5-8,共4页
职校生直接升学受限与教育分流政策有一定的关系。发展职业教育、减缓高考压力是分流政策的两个目的。据此,分流与升学政策在理论层面存在冲突,但在实践层面,冲突与否,冲突大小,不同时期有着不同的情况。文章对教育分流与职业学校升学... 职校生直接升学受限与教育分流政策有一定的关系。发展职业教育、减缓高考压力是分流政策的两个目的。据此,分流与升学政策在理论层面存在冲突,但在实践层面,冲突与否,冲突大小,不同时期有着不同的情况。文章对教育分流与职业学校升学政策的提出、两者存在的冲突以及两者冲突的历史演变进行了分析,对未来教育分流与升学政策冲突的协调提出了自己的见解:未来,随着社会与经济发展对中职的需求变小,高考压力的变小,教育分流的强制性会变小,分流与升学政策的冲突会逐步消解。 展开更多
关键词 教育分流职校生升学强制 冲突协调
下载PDF
轴向分裂变压器电流分配仿真分析及改进措施 被引量:6
4
作者 王仁 李正绪 +2 位作者 杨家辉 李林达 邓如应 《变压器》 北大核心 2020年第7期35-39,共5页
对一台轴向分裂发电机变压器在半穿越运行工况下的电流分配进行了理论计算,通过3D有限元仿真分析验证了变压器在不对称运行条件下端部调压区域存在电流过流的情况,并提出了改善措施。
关键词 轴向分裂变压器 电流分配 半穿越 强制分流
下载PDF
浅谈重庆渝合高速某桥斜拉索更换施工过程中交通组织
5
作者 晏国泰 洪德红 +1 位作者 向世奎 程建明 《交通节能与环保》 2015年第1期71-75,共5页
斜拉桥换索工程日益增多,换索施工与交通保畅相互制约。本文结合重庆渝合高速某桥斜拉索工程的实例,对该桥的交通组织方案进行了阐述,重点介绍了分流引导方案、强制分流点的设置方案、交通组织措施、应急预案等,特别是强制分流点的设置... 斜拉桥换索工程日益增多,换索施工与交通保畅相互制约。本文结合重庆渝合高速某桥斜拉索工程的实例,对该桥的交通组织方案进行了阐述,重点介绍了分流引导方案、强制分流点的设置方案、交通组织措施、应急预案等,特别是强制分流点的设置方案对限制超载超高车辆进入施工现场比较可行。为以后类似工程提供参考。 展开更多
关键词 斜拉索 交通组织 强制分流 应急预案
下载PDF
Semi-analytical solution for fully developed forced convection in metal-foam filled tube with uniform wall temperature 被引量:1
6
作者 ZHANG Jia Jie QU Zhi Guo +1 位作者 XU Hui Jin TAO Wen Quan 《Science China(Technological Sciences)》 SCIE EI CAS 2014年第12期2487-2499,共13页
Fully developed flow and heat transfer in metal-foam filled tube with uniform wall temperature(UWT) is semi-analytically investigated based on the Brinkman–Darcy model and the two-equation model, in which the inertia... Fully developed flow and heat transfer in metal-foam filled tube with uniform wall temperature(UWT) is semi-analytically investigated based on the Brinkman–Darcy model and the two-equation model, in which the inertia term, axial conduction, and thermal dispersion are ignored. A two-dimensional numerical simulation that adopts the full governing equations is also conducted to analyze the effects of neglected terms on flow and thermal transport performance by comparing with the semi-analytical solution. The effects of the relevant parameters and thermal boundary conditions including UWT and uniform heat flux(UHF) on the heat transfer characteristics are discussed based on the semi-analytical solution. The results show that the inertia term has a significant effect on the prediction of pressure drop, but has a relatively mild effect on Nusselt number. The axial conduction has significant effect on the Nusselt number at lower Reynolds number, and the effects of thermal dispersion can be neglected when the thermal conductivity ratio between fluid and solid is remarkably smaller for air/metal foam as example(kf/ks<3×10-3). The predicted Nusselt number of the semi-analytical solution is about 8% to 15% lower than that of the numerical solution with full model in the range of 4×10-5<kf/ks<3×10-3. Moreover, the temperature profile of solid is more sensitive to pore density and porosity than that of fluid under UWT condition. The Nusselt number under UWT is about 7% to 25% lower than that under UHF, and the difference is mainly determined by interfacial convection rather than solid conduction. 展开更多
关键词 metal foams SEMI-ANALYTICAL uniform wall temperature numerical simulation heat transfer
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部