The thermal-environment characteristics of the existing forced-convection cooling system were compared with those of the convective cooling system, which combined the radiant-floor cooling system using floor-heating p...The thermal-environment characteristics of the existing forced-convection cooling system were compared with those of the convective cooling system, which combined the radiant-floor cooling system using floor-heating panel typically applied to apartments in South Korea with the forced-convection cooling system using improved fan coil unit. The subjective warm/cool-feeling responses to the combined radiant-floor and convective cooling system in the questionnaire survey conducted among the test subjects were analyzed to establish the basic data for the combined cooling system. The results show that in the thermal-equilibrium condition, the vertical air temperature difference in the model living room is larger in the forced-convection-cooling condition. Most of the subjects feel a proper warm/cool feeling on their entire body, but they feel colder on the foot and lower body in the combined-cooling condition.展开更多
CFRP （carbon fiber reinforced plastic）, which is composed of carbon fibers in a resin matrix, is an extremely strong and light composite material that has found use in the aerospace and automotive industries. CFRP b...CFRP （carbon fiber reinforced plastic）, which is composed of carbon fibers in a resin matrix, is an extremely strong and light composite material that has found use in the aerospace and automotive industries. CFRP boards are very difficult to machine using common machining processes. Various machining artifacts, such as burrs and delamination, occur frequently when machining CFRP. Adequate techniques for machining CFRP have not yet been established. Recently, electroplated diamond wire machining technology has found use in cutting hard, brittle materials such as silicon and sapphire. In this study, we used an electroplated diamond wire saw to cut a CFRP workpiece. We quantified the cutting forces imposed on the workpiece and observed the surface state of the workpiece after cutting. We demonstrated that an electroplated diamond wire tool is suitable for the high-quality machining of CFRP boards.展开更多
By using the data of 1949 – 2001 (53 years) of Tropical Cyclone (TC) Yearbooks, statistical analyses are performed to study the climatic features of TCs making landfall and then passing through lakes (hereafter refer...By using the data of 1949 – 2001 (53 years) of Tropical Cyclone (TC) Yearbooks, statistical analyses are performed to study the climatic features of TCs making landfall and then passing through lakes (hereafter referred to as "L-TCs") in China. Results show that L-TCs can sustain a long time over land and the intensity is very strong during the course of landfall. Lakes can noticeably slow down the reduction of TC intensity, with the minimum pressure mostly maintained or decreased and the maximum velocity increased. The middle reach of the Yangtze River has the biggest TC dissipating rate as compared with the other areas where the TC is active.展开更多
With the point source dislocation model and the velocity structure of a layered medium,focal mechanisms of small earthquakes are calculated using the maximum amplitude of the direct P- and S-waves in the vertical comp...With the point source dislocation model and the velocity structure of a layered medium,focal mechanisms of small earthquakes are calculated using the maximum amplitude of the direct P- and S-waves in the vertical component. By system clustering,and using the vector synthesis method,the average focal mechanism solution is obtained. Using the above method,this paper analyzes the variation characteristics of the source ruptures and the P-axis azimuths of small earthquakes around the seismic zones before four strong earthquakes occurring since 2003 in the western part of north Tianshan and the middle part of Tianshan. The result shows that 2 ~ 3 years before the strong earthquakes,the focal mechanism types of small earthquakes are distributed randomly, and obvious dominant distributions are observed one year before the strong earthquakes. There are obvious changes in the P-axis azimuth.展开更多
基金Project(NRF-2013RIA2A1A01014020)supported by the National Research Foundation of Korea
文摘The thermal-environment characteristics of the existing forced-convection cooling system were compared with those of the convective cooling system, which combined the radiant-floor cooling system using floor-heating panel typically applied to apartments in South Korea with the forced-convection cooling system using improved fan coil unit. The subjective warm/cool-feeling responses to the combined radiant-floor and convective cooling system in the questionnaire survey conducted among the test subjects were analyzed to establish the basic data for the combined cooling system. The results show that in the thermal-equilibrium condition, the vertical air temperature difference in the model living room is larger in the forced-convection-cooling condition. Most of the subjects feel a proper warm/cool feeling on their entire body, but they feel colder on the foot and lower body in the combined-cooling condition.
文摘CFRP （carbon fiber reinforced plastic）, which is composed of carbon fibers in a resin matrix, is an extremely strong and light composite material that has found use in the aerospace and automotive industries. CFRP boards are very difficult to machine using common machining processes. Various machining artifacts, such as burrs and delamination, occur frequently when machining CFRP. Adequate techniques for machining CFRP have not yet been established. Recently, electroplated diamond wire machining technology has found use in cutting hard, brittle materials such as silicon and sapphire. In this study, we used an electroplated diamond wire saw to cut a CFRP workpiece. We quantified the cutting forces imposed on the workpiece and observed the surface state of the workpiece after cutting. We demonstrated that an electroplated diamond wire tool is suitable for the high-quality machining of CFRP boards.
基金Open Foundation for Wuhan Institute of Heavy Rain, CMA (IHR2006G09)a Natural Science Foundation of China project (40575029)
文摘By using the data of 1949 – 2001 (53 years) of Tropical Cyclone (TC) Yearbooks, statistical analyses are performed to study the climatic features of TCs making landfall and then passing through lakes (hereafter referred to as "L-TCs") in China. Results show that L-TCs can sustain a long time over land and the intensity is very strong during the course of landfall. Lakes can noticeably slow down the reduction of TC intensity, with the minimum pressure mostly maintained or decreased and the maximum velocity increased. The middle reach of the Yangtze River has the biggest TC dissipating rate as compared with the other areas where the TC is active.
基金funded as a sub-project under the National Science and Technology Pillar Program of China(2006BAC01B03-04-02)
文摘With the point source dislocation model and the velocity structure of a layered medium,focal mechanisms of small earthquakes are calculated using the maximum amplitude of the direct P- and S-waves in the vertical component. By system clustering,and using the vector synthesis method,the average focal mechanism solution is obtained. Using the above method,this paper analyzes the variation characteristics of the source ruptures and the P-axis azimuths of small earthquakes around the seismic zones before four strong earthquakes occurring since 2003 in the western part of north Tianshan and the middle part of Tianshan. The result shows that 2 ~ 3 years before the strong earthquakes,the focal mechanism types of small earthquakes are distributed randomly, and obvious dominant distributions are observed one year before the strong earthquakes. There are obvious changes in the P-axis azimuth.
