The cohesion weakening and friction strengthening(CWFS)model for rock reveals the strength components mobilization process during progressive brittle failure process of rock,which is very helpful in understanding mech...The cohesion weakening and friction strengthening(CWFS)model for rock reveals the strength components mobilization process during progressive brittle failure process of rock,which is very helpful in understanding mechanical properties of rock.However,the used incremental cyclic loading−unloading compression test for the determination of strength components is very complicated,which limits the application of CWFS model.In this paper,incremental cyclic loading−unloading compression test was firstly carried out to study the evolution of deformation and the strength properties of Beishan granite after various temperatures treated under different confining pressures.We found the axial and lateral unloading modulus are closely related to the applied stress and damage state of rock.Based on these findings,we can accurately determine the plastic strain during the entire failure process using conventional tri-axial compression test data.Furthermore,a strength component(cohesive and frictional strength)determination method was developed using conventional triaxial compression test.Using this method,we analyzed the variation of strength mobilization and deformation properties of Beishan granite after various temperatures treated.At last,a non-simultaneous strength mobilization model for thermally treated granite was obtained and verified by numerical simulation,which demonstrated the effectiveness of the proposed strength determination method.展开更多
Based on gradient control of carbon partitioning between martensite and austenite during heat treatment of steels,a stepping-quenching-partitioning(S-Q-P) process is developed for high strength steels.The S-Q-P proces...Based on gradient control of carbon partitioning between martensite and austenite during heat treatment of steels,a stepping-quenching-partitioning(S-Q-P) process is developed for high strength steels.The S-Q-P process involves several quenching processes at progressively lower temperatures between martensite-start(Ms) and martensite-finish(Mf) temperatures,each followed by a partitioning treatment at either the initial quenching temperature or above that temperature.A novel microstructure is designed based on the S-Q-P process.Sizes and distributions of retained austenite and high-carbon martensite surrounded by martensite laths can be manipulated by the partitioning duration and temperature,and quenching temperature of the S-Q-P process.Alloying element Si is employed in the S-Q-P steel to suppress formation of carbides and create suitable amount of retained austenite.A steel of 0.39C-1.22Mn-1.12Si-0.23Cr(wt.%) treated by the S-Q-P process is endowed with some special microstructural characteristics:some strips of retained austenite located at edges of martensite blocks with high density of dislocations and between martensite laths,some small blocks of twinned martensites distributed among bundles of the low-carbon martensite lath.The mechanical properties of the medium carbon steel after the S-Q-P process can reach ultimate tensile strength(Rm) of 1240 MPa,total elongation(EI) of 25%,and product of strength and ductility(PSD) of 31.2 GPa% that are much more improved than those after the conventional quenching-tempering(Q-T) and currently prevailing quenching-partitioning(Q-P) treatments.The PSD of the tested steel after the S-Q-P process increases by 67% and 32% as compared with those after the Q-T and Q-P processes,respectively.展开更多
Because texture images cannot be directly processed by the gray level information of individual pixel,we propose a new texture descriptor which reflects the intensity distribution of the patch centered at each pixel.T...Because texture images cannot be directly processed by the gray level information of individual pixel,we propose a new texture descriptor which reflects the intensity distribution of the patch centered at each pixel.Then the general multiphase image segmentation model of Potts model is extended for texture segmentation by adding the region information of the texture descriptor.A fast numerical scheme based on the split Bregman method is designed to speed up the computational process.The algorithm is efficient,and both the texture descriptor and the characteristic functions can be implemented easily.Experiments using synthetic texture images,real natural scene images and synthetic aperture radar images are presented to give qualitative comparisons between our method and other state-of-the-art techniques.The results show that our method can accurately segment object regions and is competitive compared with other methods especially in segmenting natural images.展开更多
基金Project(41902301)supported by the National Natural Science Foundation of ChinaProject(20201Y185)supported by the Science and Technology Foundation of Guizhou Province,China+2 种基金Project(Z018023)supported by the Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering,IRSM,CASProject(201822)supported by the Foundation for Young Talents of Guizhou University,ChinaProject(2017-5402)supported by the Mountain Geohazard Prevention R&D Center of Guizhou Province,China。
文摘The cohesion weakening and friction strengthening(CWFS)model for rock reveals the strength components mobilization process during progressive brittle failure process of rock,which is very helpful in understanding mechanical properties of rock.However,the used incremental cyclic loading−unloading compression test for the determination of strength components is very complicated,which limits the application of CWFS model.In this paper,incremental cyclic loading−unloading compression test was firstly carried out to study the evolution of deformation and the strength properties of Beishan granite after various temperatures treated under different confining pressures.We found the axial and lateral unloading modulus are closely related to the applied stress and damage state of rock.Based on these findings,we can accurately determine the plastic strain during the entire failure process using conventional tri-axial compression test data.Furthermore,a strength component(cohesive and frictional strength)determination method was developed using conventional triaxial compression test.Using this method,we analyzed the variation of strength mobilization and deformation properties of Beishan granite after various temperatures treated.At last,a non-simultaneous strength mobilization model for thermally treated granite was obtained and verified by numerical simulation,which demonstrated the effectiveness of the proposed strength determination method.
基金supported by the National Basic Research Program of China (973 program) (Grant No. 2010CB630805)
文摘Based on gradient control of carbon partitioning between martensite and austenite during heat treatment of steels,a stepping-quenching-partitioning(S-Q-P) process is developed for high strength steels.The S-Q-P process involves several quenching processes at progressively lower temperatures between martensite-start(Ms) and martensite-finish(Mf) temperatures,each followed by a partitioning treatment at either the initial quenching temperature or above that temperature.A novel microstructure is designed based on the S-Q-P process.Sizes and distributions of retained austenite and high-carbon martensite surrounded by martensite laths can be manipulated by the partitioning duration and temperature,and quenching temperature of the S-Q-P process.Alloying element Si is employed in the S-Q-P steel to suppress formation of carbides and create suitable amount of retained austenite.A steel of 0.39C-1.22Mn-1.12Si-0.23Cr(wt.%) treated by the S-Q-P process is endowed with some special microstructural characteristics:some strips of retained austenite located at edges of martensite blocks with high density of dislocations and between martensite laths,some small blocks of twinned martensites distributed among bundles of the low-carbon martensite lath.The mechanical properties of the medium carbon steel after the S-Q-P process can reach ultimate tensile strength(Rm) of 1240 MPa,total elongation(EI) of 25%,and product of strength and ductility(PSD) of 31.2 GPa% that are much more improved than those after the conventional quenching-tempering(Q-T) and currently prevailing quenching-partitioning(Q-P) treatments.The PSD of the tested steel after the S-Q-P process increases by 67% and 32% as compared with those after the Q-T and Q-P processes,respectively.
基金supported by the National Natural Science Foundation of China(No.61170106)
文摘Because texture images cannot be directly processed by the gray level information of individual pixel,we propose a new texture descriptor which reflects the intensity distribution of the patch centered at each pixel.Then the general multiphase image segmentation model of Potts model is extended for texture segmentation by adding the region information of the texture descriptor.A fast numerical scheme based on the split Bregman method is designed to speed up the computational process.The algorithm is efficient,and both the texture descriptor and the characteristic functions can be implemented easily.Experiments using synthetic texture images,real natural scene images and synthetic aperture radar images are presented to give qualitative comparisons between our method and other state-of-the-art techniques.The results show that our method can accurately segment object regions and is competitive compared with other methods especially in segmenting natural images.
