The microstructure evolution and mechanical properties of a T8-aged Al-Cu-Li alloy with increased pre-deformation(0-15%) were investigated,revealing the microstructure-strength relationship and the intrinsic strengthe...The microstructure evolution and mechanical properties of a T8-aged Al-Cu-Li alloy with increased pre-deformation(0-15%) were investigated,revealing the microstructure-strength relationship and the intrinsic strengthening mechanism.The results show that increasing the pre-deformation levels remarkably improves the strength of the alloy but deteriorates its ductility.Dislocations introduced by pre-deformation effectively suppress the formation of Guinier-Preston(GP) zones and provide more nucleation sites for T1 precipitates.This leads to more intensive and finer T1 precipitates in the samples with higher pre-deformation levels.Simultaneously,the enhanced precipitation of T1 precipitates and inhibited formation of GP zones cause the decreases in number and sizes of θ′ precipitates.The quantitative descriptions of the strength contributions from different strengthening mechanisms reveal that strengthening contributions from T1 and θ′ precipitates decrease with increasing pre-deformation.The reduced diameters of T1 precipitates are primarily responsible for their weakened strengthening effects.Therefore,the improved strength of the T8-aged Al-Cu-Li alloy is mainly attributed to the stronger strain hardening from the increased pre-deformation levels.展开更多
基于考虑含石量、含水率、块石岩性、初始孔隙比、法向压力5个影响因素的土石混合体室内大型直剪试验,利用剪切面在分形几何学上的统计规律和颗粒流数值模拟方法得到的直剪试验中颗粒的相互作用规律,对土石混合体的抗剪强度产生机制进...基于考虑含石量、含水率、块石岩性、初始孔隙比、法向压力5个影响因素的土石混合体室内大型直剪试验,利用剪切面在分形几何学上的统计规律和颗粒流数值模拟方法得到的直剪试验中颗粒的相互作用规律,对土石混合体的抗剪强度产生机制进行研究。结果表明:(1)土石混合体的剪切面呈不规则的起伏形态与块石的存在关系密切,且具有较好的分形特征,分形维数随着含石量和块石强度的增大、含水率和法向压力的减小均呈增大趋势;(2)含石量高于40%时,黏聚力小于30 k Pa;(3)内摩擦角随着含石量的增大、块石强度的增大、含水率的降低、初始孔隙比的降低、法向压力的降低均呈增大规律,且与分形维数满足正相关函数关系;(4)块石附近应力集中较明显,剪切过程中,颗粒间的接触力主要通过迎着剪切方向的接触面传递,而背着剪切方向的颗粒接触面基本不传递力;(5)内摩擦角φ等于剪切面上与颗粒本身接触性质有关的接触面内摩擦角θ0和与剪切面分形维数有关的接触面倾角θi之和,利用此机制可解释直剪试验中强度参数的变化规律。展开更多
AIM: To investigate the acupuncture-modulated gastric motility and its underlying neural mechanism.METHODS: Intragastric pressure and/or waves of gastric contraction in rats were recorded by intrapyloric balloon and c...AIM: To investigate the acupuncture-modulated gastric motility and its underlying neural mechanism.METHODS: Intragastric pressure and/or waves of gastric contraction in rats were recorded by intrapyloric balloon and changes of gastric motility induced by acupuncture stimulation were compared with the background activity before any stimulation. Gastro-vagal or splanchnic-sympathetic nerves were recorded or cut respectively for investigating the involvement of autonomic nerve pathways. Spinalization experiment was also performed.RESULTS: Acupuncture-stimulation by exciting Aδ and/or C afferent fibers, could only modulate gastric motility. Acupuncture-stimulation on fore- and hind-limbs evoked a moderate gastric motility followed by increased vagus discharges with unchanged sympathetic activity, while the same stimulus to the acupoints in abdomen resulted in reversed effects on gastric motility and autonomic nervous activities. The inhibitory gastric response was completely abolished by splanchnic denervation, but the facilitative gastric response to stimulation of acupoints in limbs was not influenced, which was opposite to the effect when vagotomy was performed. The similar depressive effects were produced by the stimulation at the acupoints homo-segmental to the gastric innervation in the animals with or without spinalization. However, the facilitation induced by the stimulation at the acupoints hetero-segmental to the gastric innervation was not observed in the spinalized animals.CONCLUSION: Facilitative effects of stimulating hetero-segmental acupoints are involved in the intact preparation of vagal nerves and spinal cord, while the inhibitory response induced by stimulating homo-segmental acupoints is involved in the intact preparation of sympathetic nerves. Only the acupuncture-stimulation with intensity over the threshold of Aδ and/or C afferent fibers can markedly modulate gastrointestinal motility.展开更多
Traditional mechanical rock breaking method is labor-intensive and low-efficient,which restrictes the development of deep resources and deep space.As a new rock-breakage technology,microwave irradiation is expected to...Traditional mechanical rock breaking method is labor-intensive and low-efficient,which restrictes the development of deep resources and deep space.As a new rock-breakage technology,microwave irradiation is expected to overcome these problems.This study examines the failure characteristics,weakening law,and breakdown mechanism of deep sandstone(depth=1050 m)samples in a microwave field.The macroscopic and microscopic properties were determined via mechanical tests,mesoscopic tests,and numerical simulations.Microwave application at 1000 W for 60 s reduced the uniaxial compressive strength of the sandstone by 50%.Thermal stress of the sandstone was enhanced by uneven expansion of minerals at the microscale.Moreover,the melting of some minerals in the high-temperature environment changed the pore structure,sharply reducing the macroscopic strength.The temperature remained high in the lower midsection of the sample,and the stress was concentrated at the bottom of the sample and along its axis.These results are expected to improve the efficiency of deep rock breaking,provide theoretical and technical support for similar rock-breakage projects,and accelerate advances in deep-Earth science.展开更多
The effects of Si content on the microstructure and yield strength of Al-(1.44-12.40)Si-0.7 Mg(wt.%)alloy sheets under the T4 condition were systematically studied via laser scanning confocal microscopy(LSCM),DSC,TEM ...The effects of Si content on the microstructure and yield strength of Al-(1.44-12.40)Si-0.7 Mg(wt.%)alloy sheets under the T4 condition were systematically studied via laser scanning confocal microscopy(LSCM),DSC,TEM and tensile tests.The results show that the recrystallization grain of the alloy sheets becomes more refined with an increase in Si content.When the Si content increases from 1.44 to 12.4 wt.%,the grain size of the alloy sheets decreases from approximately 47 to 10μm.Further,with an increase in Si content,the volume fraction of the GP zones in the matrix increases slightly.Based on the existing model,a yield strength model for alloy sheets was proposed.The predicted results are in good agreement with the actual experimental results and reveal the strengthening mechanisms of the Al-(1.44-12.40)Si-0.7 Mg alloy sheets under the T4 condition and how they are influenced by the Si content.展开更多
The growth and evolution of the knowledge network in supply chain can be characterized by dynamic growth clustering and non-homogeneous degree distribution.The networks with the above characteristics are also known as...The growth and evolution of the knowledge network in supply chain can be characterized by dynamic growth clustering and non-homogeneous degree distribution.The networks with the above characteristics are also known as scale-free networks.In this paper,the knowledge network model in supply chain is established,in which the preferential attachment mechanism based on the node strength is adopted to simulate the growth and evolution of the network.The nodes in the network have a certain preference in the choice of a knowledge partner.On the basis of the network model,the robustness of the three network models based on different preferential attachment strategies is investigated.The robustness is also referred to as tolerances when the nodes are subjected to random destruction and malicious damage.The simulation results of this study show that the improved network has higher connectivity and stability.展开更多
基金supported by the Natural Science Foundation of Hunan Province, China (No. 2023JJ30678)。
文摘The microstructure evolution and mechanical properties of a T8-aged Al-Cu-Li alloy with increased pre-deformation(0-15%) were investigated,revealing the microstructure-strength relationship and the intrinsic strengthening mechanism.The results show that increasing the pre-deformation levels remarkably improves the strength of the alloy but deteriorates its ductility.Dislocations introduced by pre-deformation effectively suppress the formation of Guinier-Preston(GP) zones and provide more nucleation sites for T1 precipitates.This leads to more intensive and finer T1 precipitates in the samples with higher pre-deformation levels.Simultaneously,the enhanced precipitation of T1 precipitates and inhibited formation of GP zones cause the decreases in number and sizes of θ′ precipitates.The quantitative descriptions of the strength contributions from different strengthening mechanisms reveal that strengthening contributions from T1 and θ′ precipitates decrease with increasing pre-deformation.The reduced diameters of T1 precipitates are primarily responsible for their weakened strengthening effects.Therefore,the improved strength of the T8-aged Al-Cu-Li alloy is mainly attributed to the stronger strain hardening from the increased pre-deformation levels.
文摘基于考虑含石量、含水率、块石岩性、初始孔隙比、法向压力5个影响因素的土石混合体室内大型直剪试验,利用剪切面在分形几何学上的统计规律和颗粒流数值模拟方法得到的直剪试验中颗粒的相互作用规律,对土石混合体的抗剪强度产生机制进行研究。结果表明:(1)土石混合体的剪切面呈不规则的起伏形态与块石的存在关系密切,且具有较好的分形特征,分形维数随着含石量和块石强度的增大、含水率和法向压力的减小均呈增大趋势;(2)含石量高于40%时,黏聚力小于30 k Pa;(3)内摩擦角随着含石量的增大、块石强度的增大、含水率的降低、初始孔隙比的降低、法向压力的降低均呈增大规律,且与分形维数满足正相关函数关系;(4)块石附近应力集中较明显,剪切过程中,颗粒间的接触力主要通过迎着剪切方向的接触面传递,而背着剪切方向的颗粒接触面基本不传递力;(5)内摩擦角φ等于剪切面上与颗粒本身接触性质有关的接触面内摩擦角θ0和与剪切面分形维数有关的接触面倾角θi之和,利用此机制可解释直剪试验中强度参数的变化规律。
基金Supported by National Natural Science Foundation of China, No. C30100245 National Basic Research 973 Program, No. 2005CB523308
文摘AIM: To investigate the acupuncture-modulated gastric motility and its underlying neural mechanism.METHODS: Intragastric pressure and/or waves of gastric contraction in rats were recorded by intrapyloric balloon and changes of gastric motility induced by acupuncture stimulation were compared with the background activity before any stimulation. Gastro-vagal or splanchnic-sympathetic nerves were recorded or cut respectively for investigating the involvement of autonomic nerve pathways. Spinalization experiment was also performed.RESULTS: Acupuncture-stimulation by exciting Aδ and/or C afferent fibers, could only modulate gastric motility. Acupuncture-stimulation on fore- and hind-limbs evoked a moderate gastric motility followed by increased vagus discharges with unchanged sympathetic activity, while the same stimulus to the acupoints in abdomen resulted in reversed effects on gastric motility and autonomic nervous activities. The inhibitory gastric response was completely abolished by splanchnic denervation, but the facilitative gastric response to stimulation of acupoints in limbs was not influenced, which was opposite to the effect when vagotomy was performed. The similar depressive effects were produced by the stimulation at the acupoints homo-segmental to the gastric innervation in the animals with or without spinalization. However, the facilitation induced by the stimulation at the acupoints hetero-segmental to the gastric innervation was not observed in the spinalized animals.CONCLUSION: Facilitative effects of stimulating hetero-segmental acupoints are involved in the intact preparation of vagal nerves and spinal cord, while the inhibitory response induced by stimulating homo-segmental acupoints is involved in the intact preparation of sympathetic nerves. Only the acupuncture-stimulation with intensity over the threshold of Aδ and/or C afferent fibers can markedly modulate gastrointestinal motility.
基金Projects(51822403,51827901)supported by the National Natural Science Foundation of ChinaProject(2018HH0159)supported by the Sichuan International Technological Innovation Cooperation,China。
文摘Traditional mechanical rock breaking method is labor-intensive and low-efficient,which restrictes the development of deep resources and deep space.As a new rock-breakage technology,microwave irradiation is expected to overcome these problems.This study examines the failure characteristics,weakening law,and breakdown mechanism of deep sandstone(depth=1050 m)samples in a microwave field.The macroscopic and microscopic properties were determined via mechanical tests,mesoscopic tests,and numerical simulations.Microwave application at 1000 W for 60 s reduced the uniaxial compressive strength of the sandstone by 50%.Thermal stress of the sandstone was enhanced by uneven expansion of minerals at the microscale.Moreover,the melting of some minerals in the high-temperature environment changed the pore structure,sharply reducing the macroscopic strength.The temperature remained high in the lower midsection of the sample,and the stress was concentrated at the bottom of the sample and along its axis.These results are expected to improve the efficiency of deep rock breaking,provide theoretical and technical support for similar rock-breakage projects,and accelerate advances in deep-Earth science.
基金Project(2016YFB0300801)supported by the National Key Research and Development Program of ChinaProject(51871043)supported by the National Natural Science Foundation of ChinaProject(N180212010)supported by the Fundamental Research Funds for the Central Universities of China。
文摘The effects of Si content on the microstructure and yield strength of Al-(1.44-12.40)Si-0.7 Mg(wt.%)alloy sheets under the T4 condition were systematically studied via laser scanning confocal microscopy(LSCM),DSC,TEM and tensile tests.The results show that the recrystallization grain of the alloy sheets becomes more refined with an increase in Si content.When the Si content increases from 1.44 to 12.4 wt.%,the grain size of the alloy sheets decreases from approximately 47 to 10μm.Further,with an increase in Si content,the volume fraction of the GP zones in the matrix increases slightly.Based on the existing model,a yield strength model for alloy sheets was proposed.The predicted results are in good agreement with the actual experimental results and reveal the strengthening mechanisms of the Al-(1.44-12.40)Si-0.7 Mg alloy sheets under the T4 condition and how they are influenced by the Si content.
基金Supported by the National Natural Science Foundation of China(No.71172169)
文摘The growth and evolution of the knowledge network in supply chain can be characterized by dynamic growth clustering and non-homogeneous degree distribution.The networks with the above characteristics are also known as scale-free networks.In this paper,the knowledge network model in supply chain is established,in which the preferential attachment mechanism based on the node strength is adopted to simulate the growth and evolution of the network.The nodes in the network have a certain preference in the choice of a knowledge partner.On the basis of the network model,the robustness of the three network models based on different preferential attachment strategies is investigated.The robustness is also referred to as tolerances when the nodes are subjected to random destruction and malicious damage.The simulation results of this study show that the improved network has higher connectivity and stability.
