The problem of scattering of SH-wave by a circular cavity and an arbitrary beeline crack in right-angle plane was investigated using the methods of Green's function,complex variables and muti-polar coordinates.Fir...The problem of scattering of SH-wave by a circular cavity and an arbitrary beeline crack in right-angle plane was investigated using the methods of Green's function,complex variables and muti-polar coordinates.Firstly,we constructed a suitable Green's function,which is an essential solution to the displacement field for the elastic right-angle plane possessing a circular cavity while bearing out-of-plane harmonic line source load at arbitrary point.Secondly,based on the method of crack-division,integration for solution was established,then expressions of displacement and stress were obtained while crack and circular cavities were both in existence.Finally,the dynamic stress concentration factor around the circular cavity and the dynamic stress intensity factor at crack tip were discussed to the cases of different parameters in numerical examples.Calculation results show that the crack produces adverse engineering influence on both of the dynamic stress concentration factor and the dynamic stress intensity factor.展开更多
Boosting the alkaline hydrogen evolution and oxidation reaction(HER/HOR)kinetics is vital to practicing the renewable hydrogen cycle in alkaline media.Recently,intensive research has demonstrated that interface engine...Boosting the alkaline hydrogen evolution and oxidation reaction(HER/HOR)kinetics is vital to practicing the renewable hydrogen cycle in alkaline media.Recently,intensive research has demonstrated that interface engineering is of critical significance for improving the performance of heterostructured electrocatalysts particularly toward the electrochemical reactions involving multiple reaction intermediates like alkaline hydrogen electrocatalysis,and the research advances also bring substantial non-trivial fundamental insights accordingly.Herein,we review the current status of interface engineering with respect to developing efficient heterostructured electrocatalysts for alkaline HER and HOR.Two major subjects—how interface engineering promotes the reaction kinetics and what fundamental insights interface engineering has brought into alkaline HER and HOR—are discussed.Specifically,heterostructured electrocatalysts with abundant interfaces have shown substantially accelerated alkaline hydrogen electrocatalysis kinetics owing to the synergistic effect from different components,which could balance the adsorption/desorption behaviors of the intermediates at the interfaces.Meanwhile,interface engineering can effectively tune the electronic structures of the active sites via electronic interaction,interfacial bonding,and lattice strain,which would appropriately optimize the binding energy of targeted intermediates like hydrogen.Furthermore,the confinement effect is critical for delivering high durability by sustaining high density of active sites.At last,our own perspectives on the challenges and opportunities toward developing efficient heterostructured electrocatalysts for alkaline hydrogen electrocatalysis are provided.展开更多
We introduce a pre-hydrodynamic correction to the commonly used Glauber model to bring the random scattering information to the initial condition of the hydrodynamic description for the heavy ion collisions.The result...We introduce a pre-hydrodynamic correction to the commonly used Glauber model to bring the random scattering information to the initial condition of the hydrodynamic description for the heavy ion collisions.The results of this correction obviously shrink the value of the elliptic flow in the medium momentum region and move the corresponding momentum of the maximum v 2 forwards to smaller p T value.These fit the experimental data quite well.This correction implies that the quark-gluon plasma(QGP) has reached the thermal equilibrium when the hydrodynamic expansion starts.Such a conclusion of quick-equilibrium confirms the conclusion that QGP is a strongly interacting system.展开更多
The surface of a peach is known to exhibit spe- cial wettability and adhesion behaviors. We disclose that the peach surface is covered with long and short indumentums. The long indumentums are covered mainly with hydr...The surface of a peach is known to exhibit spe- cial wettability and adhesion behaviors. We disclose that the peach surface is covered with long and short indumentums. The long indumentums are covered mainly with hydrophobic wax molecules, while the short indumentums are coated mostly with hydrophilic polysaccharides. Thus, the peach surface exhibits a quasi-superhydrophobic property and high adhesive force. A water droplet on the surface of a peach is a quasi-sphere, which is unable to roll off even when the peach is turned upside down. This is defined as the peach skin effect. We present that the quasi-superhydrophobic state with high adhesive force is attributed to the special coexisting Wenzel＇s and Cassie＇s state for water droplets, thus creating the strong interaction between the water droplet and surface.展开更多
Molecular dynamic simulations are performed to study the nanoscratching behavior of polymers.The effects of scratching depth,scratching velocity and indenter/polymer interaction strength are investigated.It is found t...Molecular dynamic simulations are performed to study the nanoscratching behavior of polymers.The effects of scratching depth,scratching velocity and indenter/polymer interaction strength are investigated.It is found that polymer material in the scratching zone around the indenter can be removed in a ductile manner as the local temperature in the scratching zone exceeds glass transition temperature Tg.The recovery of polymer can be more significant when the temperature approaches or exceeds Tg.The tangential force,normal force and friction coefficient increase as the scratching depth increases.A larger scratching velocity leads to more material deformation and higher pile-up.The tangential force and normal force are larger for a larger scratching velocity whereas the friction coefficient is almost independent of the scratching velocities studied.It is also found that stronger indenter/polymer interaction strength results in a larger tangential force and friction coefficient.展开更多
文摘The problem of scattering of SH-wave by a circular cavity and an arbitrary beeline crack in right-angle plane was investigated using the methods of Green's function,complex variables and muti-polar coordinates.Firstly,we constructed a suitable Green's function,which is an essential solution to the displacement field for the elastic right-angle plane possessing a circular cavity while bearing out-of-plane harmonic line source load at arbitrary point.Secondly,based on the method of crack-division,integration for solution was established,then expressions of displacement and stress were obtained while crack and circular cavities were both in existence.Finally,the dynamic stress concentration factor around the circular cavity and the dynamic stress intensity factor at crack tip were discussed to the cases of different parameters in numerical examples.Calculation results show that the crack produces adverse engineering influence on both of the dynamic stress concentration factor and the dynamic stress intensity factor.
基金funding support from “Hundred Talents Program” of Zhejiang University, Chinapartially supported by the Australian Research Council (ARC) Discovery Project (DP200100365)
文摘Boosting the alkaline hydrogen evolution and oxidation reaction(HER/HOR)kinetics is vital to practicing the renewable hydrogen cycle in alkaline media.Recently,intensive research has demonstrated that interface engineering is of critical significance for improving the performance of heterostructured electrocatalysts particularly toward the electrochemical reactions involving multiple reaction intermediates like alkaline hydrogen electrocatalysis,and the research advances also bring substantial non-trivial fundamental insights accordingly.Herein,we review the current status of interface engineering with respect to developing efficient heterostructured electrocatalysts for alkaline HER and HOR.Two major subjects—how interface engineering promotes the reaction kinetics and what fundamental insights interface engineering has brought into alkaline HER and HOR—are discussed.Specifically,heterostructured electrocatalysts with abundant interfaces have shown substantially accelerated alkaline hydrogen electrocatalysis kinetics owing to the synergistic effect from different components,which could balance the adsorption/desorption behaviors of the intermediates at the interfaces.Meanwhile,interface engineering can effectively tune the electronic structures of the active sites via electronic interaction,interfacial bonding,and lattice strain,which would appropriately optimize the binding energy of targeted intermediates like hydrogen.Furthermore,the confinement effect is critical for delivering high durability by sustaining high density of active sites.At last,our own perspectives on the challenges and opportunities toward developing efficient heterostructured electrocatalysts for alkaline hydrogen electrocatalysis are provided.
基金supported by the National Natural Science Foundation of China (Grant Nos. 10775069,10935001 and 11075075)the Research Fund for the Doctoral Program of Higher Education (Grant No.200802840009)the Priority Academic Program Development of Jiangsu Higher Education Institution
文摘We introduce a pre-hydrodynamic correction to the commonly used Glauber model to bring the random scattering information to the initial condition of the hydrodynamic description for the heavy ion collisions.The results of this correction obviously shrink the value of the elliptic flow in the medium momentum region and move the corresponding momentum of the maximum v 2 forwards to smaller p T value.These fit the experimental data quite well.This correction implies that the quark-gluon plasma(QGP) has reached the thermal equilibrium when the hydrodynamic expansion starts.Such a conclusion of quick-equilibrium confirms the conclusion that QGP is a strongly interacting system.
基金supported by the National Natural Science Foundation of China(21103006)the Beijing Natural Science Foundation(2132030)+2 种基金the National High Technology Research and Development Program of China(2012AA030305)the Fundamental Research Funds for the Central Universities(YWF-10-01-B16,YWF-11-03-Q-214,YWF-13-DX-XYJL-004)the 111 Project(B14009)
文摘The surface of a peach is known to exhibit spe- cial wettability and adhesion behaviors. We disclose that the peach surface is covered with long and short indumentums. The long indumentums are covered mainly with hydrophobic wax molecules, while the short indumentums are coated mostly with hydrophilic polysaccharides. Thus, the peach surface exhibits a quasi-superhydrophobic property and high adhesive force. A water droplet on the surface of a peach is a quasi-sphere, which is unable to roll off even when the peach is turned upside down. This is defined as the peach skin effect. We present that the quasi-superhydrophobic state with high adhesive force is attributed to the special coexisting Wenzel＇s and Cassie＇s state for water droplets, thus creating the strong interaction between the water droplet and surface.
基金supported by the National Natural Science Foundation of China (Grant No.90923038)the National Basic Research Program of China (Grant No.2011CB706703)+1 种基金"111"project (Grant No.B07014)by the State Administration of Foreign Experts Affairs and the Ministry of Education of China
文摘Molecular dynamic simulations are performed to study the nanoscratching behavior of polymers.The effects of scratching depth,scratching velocity and indenter/polymer interaction strength are investigated.It is found that polymer material in the scratching zone around the indenter can be removed in a ductile manner as the local temperature in the scratching zone exceeds glass transition temperature Tg.The recovery of polymer can be more significant when the temperature approaches or exceeds Tg.The tangential force,normal force and friction coefficient increase as the scratching depth increases.A larger scratching velocity leads to more material deformation and higher pile-up.The tangential force and normal force are larger for a larger scratching velocity whereas the friction coefficient is almost independent of the scratching velocities studied.It is also found that stronger indenter/polymer interaction strength results in a larger tangential force and friction coefficient.
