“强规制型”科研诚信治理的特征及启示：以挪威经验为例

本文总结了近年来挪威更新科研诚信法律制度体系、完善科研诚信多元共治体系、建立分级调查处理程序、开展科研诚信跟踪调查、建立期刊评价信息系统等多项改革举措,分析了挪威“强规制型”科研诚信建设的特点和经验,结合我国实际,提出以治理理论为指导,建立“正向激励”加“不端惩戒”的科研诚信双向治理模式,并从治理制度、治理机构、信息系统、国际合作等方面提出建议。

高层住宅防火、节能、舒适度建筑设计要点探讨

通过对高层住宅建筑设计的要点分析,提出了高层住宅建筑设计专业容易忽视的一些问题,希望对从业者提供设计中思考的切入点,为施工图设计更加完善提供好的参考。

A new nonlinear empirical strength criterion for rocks under conventional triaxial compression

The failure criterion of rocks is a critical factor involved in reliability design and stability analysis of geotechnical engineering.In order to accurately evaluate the triaxial compressive strength of rocks under different confining pressures,a nonlinear empirical strength criterion based on Mohr-Coulomb criterion was proposed in this paper.Through the analysis of triaxial test strength of 11 types of rock materials,the feasibility and validity of proposed criterion was discussed.For a further verification,six typical strength criteria were selected,and the prediction results of each criterion and test results were statistically analyzed.The comparative comparison results show that the prediction results obtained by applying this new criterion to 97 conventional triaxial compression tests of 11 different rock materials are highly consistent with the experimental data.Statistical analysis was executed to assess the application of the new criterion and other classical criteria in predicting the failure behavior of rock.This proposed empirical criterion provides a new reference and method for the determination of triaxial compressive strength of rock materials.

Sound transducer calibration of ambulatory audiometric system utilizing delta learning rule

An efficient calibration algorithm for an ambulatory audiometric test system is proposed. This system utilizes a personal digital assistant (PDA) device to generate the correct sound pressure level (SPL) from an audiometric transducer such as an earphone. The calibrated sound intensities for an audio-logical examination can be obtained in terms of the sound pressure levels of pure-tonal sinusoidal signals in eight-banded frequency ranges (250, 500, 1 000, 2 000, 3 000, 4 000, 6 000 and 8 000 Hz), and with mapping of the input sound pressure levels by the weight coefficients that are tuned by the delta learning rule. With this scheme, the sound intensities, which evoke eight-banded sound pressure levels by 5 dB steps from a minimum of 25 dB to a maximum of 80 dB, can be generated without volume displacement. Consequently, these sound intensities can be utilized to accurately determine the hearing threshold of a subject in the ambulatory audiometric testing environment.

Efficient Temporal Difference Learning with Adaptive λ

Aim To find a more efficient learning method based on temporal difference learning for delayed reinforcement learning tasks. Methods A kind of Q learning algorithm based on truncated TD( λ ) with adaptive schemes of λ value selection addressed to absorbing Markov decision processes was presented and implemented on computers. Results and Conclusion Simulations on the shortest path searching problems show that using adaptive λ in the Q learning based on TTD( λ ) can speed up its convergence.

Assessment on strength reduction schemes for geotechnical stability analysis involving the Drucker-Prager criterion

For geotechnical stability analysis involving the Drucker-Prager(DP)criterion,both the c-ϕreduction scheme and the M-K reduction scheme can be utilized.With the aid of the second-order cone programming optimized finite element method(FEM-SOCP),a comparison of the two strength reduction schemes for the stability analysis of a homogeneous slope and a multilayered slope is carried out.Numerical investigations disclose that the FoS results calculated by the c-ϕreduction scheme agree well with those calculated by the classical Morgenstern-Price solutions.However,the FoS results attained by the M-K reduction scheme may lead to conservative estimation of the geotechnical safety,particularly for the cases with large internal friction angles.In view of the possible big difference in stability analysis results caused by the M-K reduction scheme,the c-ϕreduction scheme is recommended for the geotechnical stability analyses involving the DP criterion.

In situ strength of coal bed based on the size effect study on the uniaxial compressive strength

In the early 1990 s, the Foundation for Science and Technology of Rio Grande do Sul State(CIENTEC)developed a pioneering study in Brazil, related to the simultaneous mining of multiple coal seams.One of the activities included detailed studies on the geomechanical characterization of materials present in the Irapua coal seam, under exploitation in the A-Sangao Mine, located near the city of Criciuma-SC,within the South-Catarinense coalfield. The goal of the laboratory tests was to define the behavior of the uniaxial compressive strength of the Irapua coal seam and establish a first approximation for the in situ strength value of this coal seam, since existing knowledge is solely based on practical mining experience over the years. Large samples of the coal seam were collected, using special techniques to maintain the integrity of the material, and a set of 56 uniaxial compression tests in cubic specimens, with side length ranging from 4.5 to 31 cm, were conducted in laboratory. This paper describes the experimental techniques used in the assays, and also presents the uniaxial compression strength results obtained.Moreover, important aspects of this type of study are considered, highlighting the size effect for the carbonaceous bed and the estimation of in situ strength values for the Irapua coal seam.

Mechanism analysis and process optimization of sand and plug removal with rotating jet in horizontal well

In the view of the problems existing in horizontal well,such as sand depositing and cleaning difficulty of borehole,a technology with rotating jet suitable to resolution of the problems was presented.Based on liquid solid two-phase flow theory,the analyses on the sand movement law and the swirling field influential factors were conducted.Results show that:1) With the increasing of displacement in horizontal section annulus,swirling field strength increases,and when the displacement is constant,the closer from the nozzle,the stronger the swirling field strength is;2) Head rotating speed and liquid viscosity have little influence on the swirling field strength,but the sand-carrying rate of fluid can increase by increasing liquid viscosity in a certain range;3) Rotating the string and reducing its eccentricity in annulus are conducive for sand migration in the annulus;4) The sand can be suspended and accelerated again and the swirling field strength is enhanced by the helix agitator.Hence,the research results provide the theoretical basis for the design and application of rotating jet tool.

Global Convergence of a New Restarting Conjugate Gradient Method for Nonlinear Optimizations

Conjugate gradient optimization algorithms depend on the search directions with different choices for the parameters in the search directions. In this note, by combining the nice numerical performance of PR and HS methods with the global convergence property of the class of conjugate gradient methods presented by HU and STOREY(1991), a class of new restarting conjugate gradient methods is presented. Global convergences of the new method with two kinds of common line searches, are proved. Firstly, it is shown that, using reverse modulus of continuity function and forcing function, the new method for solving unconstrained optimization can work for a continously dif ferentiable function with Curry-Altman's step size rule and a bounded level set. Secondly, by using comparing technique, some general convergence properties of the new method with other kind of step size rule are established. Numerical experiments show that the new method is efficient by comparing with FR conjugate gradient method.

Dynamic fracture behavior of rock under impact load using the caustics method

We studied the dynamic fracture mechanical behavior of rock under different impact rates. The fracture experiment was a three-point bending beam subjected to different impact loads monitored using the reflected caustics method. The mechanical parameters for fracture of the three-poim bending beam specimen under impact load are analyzed. The mechanism of crack propagation is discussed. Experimental results show that the dynamic stress intensity factor increases before crack initiation. When the dynamic stress intensity factor reaches its maximum value the crack starts to develop. After crack initiation the dynamic stress intensity factor decreases rapidly and oscillates. As the impact rate increases the cracks initiate earlier, the maximum value of crack growth velocity becomes smaller and the values of dynamic stress intensity factor also vary less during crack propagation. The results provide a theoretical basis for the study of rock dynamic fracture.

Rule Generation Based on Dominance Matrices and Functions

Rough set theory has proved to be a useful tool for rule induction. But, the theory based on indiscernibility relation or similarity relation cannot induce rules from decision tables with criteria. Greco et al have proposed a new rough set approach based on dominance relation to handle the problems. The concept of dominance matrix is put forward and the dominance function is constructed to compute the minimal decision rules which are more general and applicable than the ones induced by the classical rough set theory. In addition, the methodology of simplification is presented to eliminate the redundancy in the rule set.

New constitutive model for the study of creeping solids

In this paper, a incremental form of constitutive laws for creeping studies are proposed. The equations are based on the concept of creep hardening surface. Damage effects were introduced to the new constitutive relations to study solids creeping effects with pre-existing damages. The present formula is easy to be adopted into other numerical procedures such as finite element methods.

Optimal Response Learning and Its Convergence in Multiagent Domains

In multiagent reinforcement learning, with different assumptions of the opponents’ policies, an agent adopts quite different learning rules, and gets different learning performances. We prove that, in multiagent domains, convergence of the Q values is guaranteed only when an agent behaves optimally and its opponents’ strategies satisfy certain conditions, and an agent can get best learning performances when it adopts the same learning algorithm as that of its opponents.

Local Path Planning Method of the Self-propelled Model Based on Reinforcement Learning in Complex Conditions

Conducting hydrodynamic and physical motion simulation tests using a large-scale self-propelled model under actual wave conditions is an important means for researching environmental adaptability of ships. During the navigation test of the self-propelled model, the complex environment including various port facilities, navigation facilities, and the ships nearby must be considered carefully, because in this dense environment the impact of sea waves and winds on the model is particularly significant. In order to improve the security of the self-propelled model, this paper introduces the Q learning based on reinforcement learning combined with chaotic ideas for the model＇s collision avoidance, in order to improve the reliability of the local path planning. Simulation and sea test results show that this algorithm is a better solution for collision avoidance of the self navigation model under the interference of sea winds and waves with good adaptability.

The construction design and practice of Three Gorges Project

The construction of Three Gorges Project (TGP) is characterized by large construction scale,high construction intensity and complexity in technology.In view of various technical difficulties such as navigation in construction period,two river closures,high-intensity concrete and earth-rock construction,high-intensity construction and demolition of RCC (roller compacted concrete) cofferdam in stage III and immediate navigation of double-line five-step shiplock after impoundment of reservoir,the scheme of river diversion during construction is adopted,namely "diversion in 3 stages,open channel navigation and cofferdam power generation".The practice and innovation achievements in river diversion during construction as well as earth-rock and concrete construction are presented emphatically.

Coexistence and Extinction Pattern of Asymmetric Cyclic Game Species in a Square Lattice

The co-evolutionary dynamics of a cyclic game system is investigated in a two-dimensional square lattice with the asymmetrical rates for three species. Different with the well-mixed system, coexistence and extinction emerge alternately in the system, where a ＂zero-one＂ behavior is robust for a small population size, whereas, the system is predominated by coexistence for a big population one. We study in detail the influence about the fluctuation to the change of the state, and find that the difference between the maximal amplitude about the fluctuation and the average intensity determines which state the system is ultimately. In addition, we introduce Ports energy to explain the reason of the ＂zero-one＂ behavior. It is shown that the average Ports energy per site is the distance to the ＂zero-one＂ behavior in the model.

Strata behavior investigation for high-intensity mining in the water-rich coal seam

This paper describes a specific case of mining in a water-rich coal seam in western China. Water inrushes,roof caving and other disasters induced by intensive mining operation could pose great threats to the safety of coal mines. The strata behavior during the high-intensity extraction in the water-rich coal seam is analyzed by employing the numerical simulation method and in situ monitoring. The results show that about 10 m ahead of the workface, the front abutment pressure peaks is at 34.13 MPa, while the peak of the side abutment pressure is located about 8 m away from the gateway with the value of 12.41 MPa; the height of the fracture zone, the first weighting step and the cycle weighting step are calculated to be 45,50 and 20.8 m, respectively; pressure distribution in the workface is characterized by that the vertical pressure in the center occurs earlier and is stronger than those on both ends. Then, the results above are verified by in situ measurement, which may provide a basis for safe mining under similar conditions.

Precursory Signals of Extensive and Persistent Extreme Cold Events in China

The distinct precursory signals of countrywide extensive and persistent extreme cold events (CECs) were investigated and contrasted with those of countrywide cold wave events (CCWs). It is shown that most CECs were accompanied by a CCW in the initial stages. From the comparison between the CECs and the CCWs that were independent of any CEC, it is found that a south- west-northeast-oriented tilted ridge at 500 hPa was present around the Europe-Barents Sea regions approximately 10 days prior to the start of the CEC. Consistent with this feature, a high sea level pressure and strong cold air accumulation occurred over a broad extent of northern Eurasia one week prior to the start of the CEC. The tilted ridge and the strong cold air accumulation were the precursory signals that were absent for the CCW, and they provide important clues for the early prediction of whether a CCW event might evolve into a CEC.

Optimization of Cr(VI) bioremediation in contaminated soil using indigenous bacteria

Bench-scale soil column experiments were carried out to evaluate the effectiveness of Cr（VI） bioremediation process in soils by using indigenous bacteria with the addition of bacteria nutrient media. Effects of particle size, spray intensity, initial Cr（VI） concentration, circulation mode and soil depth on Cr（VI） remediation were studied. Results show that soils after 6 d remediation with spray intensity controlled in the range of 29.6-59.2 mL/min could well fulfill the requirement of concrete aggregate and roadbed material usage, for the leaching toxicity concentration of the Cr（VI） in treated soils under the chosen condition is far less than 5 mg/L The leaching toxicity and fractions of both hexavalent chromium and trivalent chromium from remediated soils were determined and compared with that of untreated soil. The results show that water soluble Cr（VI） declines from 1520.54 mg/kg to 0.68 mg/kg, exchangeable Cr（VI） decreases from 34.83 mg/kg to 0.01 mg/kg and carbonates-bonded Cr（V1） falls from 13.55 mg/kg to 0.68 mg/kg. Meanwhile, a corresponding increase in carbonate-bonded Cr（III）, Fe and Mn oxides-bonded Cr（III） and organic matter-bonded Cr（III） are found. It reveals that indigenous bacteria can leach out water soluble Cr（VI）, exchangeable Cr（VI） and carbonates-bonded Cr（VI） from contaminated soil followed by converting into carbonate-bonded Cr（III）, Fe and Mn oxides-bonded Cr（IlI）, organic matter-bonded Cr（III） and residual Cr（III）.

A climatic environmental performance assessment method for ecological city construction:Application to Beijing Yanqi Lake

In contrast to the input perspective for evaluating planning metrics, this research takes the climatic environmental output effects as the starting point for assessing ecological city construction. Based on approaches such as observation data analysis, meteorological model simulation, and remote sensing, a set of climatic environmental performance assessment methods is developed and established. These methods mainly focus on surface ventilation assessment and urban thermal environment assessment. With the Yanqi Lake ecological development demonstration area located in Huairou district, Beijing as an example, the assessment of the local climatic environment before and after the construction are conducted, and relevant policy suggestions for urban planning and construction are presented. The results show that after development, the ventilation capacity will decrease overall and the ventilation potential index will decrease from 0.53 to 0.44. While this is not a large reduction, and is still at a favorable level, the ventilation potential in some local areas will markedly decrease. Furthermore, the thermal environment will become poorer to some extent; the urban heat island(UHI) area and intensity will increase compared with the current situation;continuous heat islands may occur in local areas; the UHI potential index of the core area will rise from 0.0878 to 0.1217(still a favorable level).Therefore, urban surfaces should be carefully developed and arranged during planning. It is suggested that the negative impacts of large areas of urban construction on the local climatic environment in the Yanqi Lake could be mitigated by 1) strengthening the airflow by introducing fresh,cold, northwesterly air via constructed ventilation corridors, 2) increasing the number of ecological cold sources, particularly for water bodies and green belts to prevent the UHI in the southern region of Yanqi Lake from becoming linked with each other, and 3) considering a pre-program before sub-domain and building planning to obtain optimum building locations. Different construction standards should be developed for different ventilation potential and UHI intensity levels. For strong heat island areas, land areas should be reserved to serve as cold sources.