The microstructure of steels treated by Q&P(quenching and partitioning) process was characterized,a method of controlling retained austenite fraction based on inhomogeneous martensitic transformation was proposed,...The microstructure of steels treated by Q&P(quenching and partitioning) process was characterized,a method of controlling retained austenite fraction based on inhomogeneous martensitic transformation was proposed,and the mechanical properties of steels treated by Q&P process were measured.The results show that the microstructure of the studied steels is mainly composed of initial martensite,fresh martensite and retained austenite.The initial marteniste formed at the first quenching step is easily etched;the fresh martensite formed at the final quenching step looks like 'blocky' type phase,and the retained austenite is mainly located on the packet boundary and initial austenite grain boundary.The inhomogeneous microstructure causes the experimental optimum quenching temperature corresponding to maximum retained austenite fraction to be higher than the calculation based on CPE(constrained paraequilibrium) model.The product of tensile strength and total tensile elongation is 47.5 GPa%,and tensile strength of 1760 MPa was obtained for the steel with carbon content of 0.51 wt%.The TRIP(transformation induced plasticity) effects of the large fractioned metastable austenite make a main contribution to the high ductility improvement,and the martensitic matrix provides high strength.展开更多
On-line thermo mechanical controlled processing(TMCP) was conducted to develop the third generation high strength low alloy(HSLA) steel with high toughness economically.The ultra-low carbon content ensured a high leve...On-line thermo mechanical controlled processing(TMCP) was conducted to develop the third generation high strength low alloy(HSLA) steel with high toughness economically.The ultra-low carbon content ensured a high level of upper shelf energy while ultrafine lath martensitic structure transformed from super-thin pancaked austenite during controlled rolling and cooling.The reduction of martensite block size decreased ductile-to-brittle transition temperature(DBTT) and compensated the strength loss due to carbon reduction.Consequently,the excellent balance of strength and toughness values was obtained as 950-1060 MPa for yield strength,180 J for Charpy V-notch impact absorbed energy at 30℃,which is much superior to that of traditional martensitic steel.Two mechanisms for the refinement of lath martensite block were proposed:One is the austenite grain refinement in the direction of thickness,and the other is the reduction in the fraction of sub-block boundaries with small misorientation and the increase in the fraction of block boundaries with large misorientation,possibly due to austenite hardening.展开更多
基金supported by a grant from the National Basic Research Program of China (973 Program) (Grant No. 2010CB630803)the Youth Science Funds of China (Grant No. 51101036)
文摘The microstructure of steels treated by Q&P(quenching and partitioning) process was characterized,a method of controlling retained austenite fraction based on inhomogeneous martensitic transformation was proposed,and the mechanical properties of steels treated by Q&P process were measured.The results show that the microstructure of the studied steels is mainly composed of initial martensite,fresh martensite and retained austenite.The initial marteniste formed at the first quenching step is easily etched;the fresh martensite formed at the final quenching step looks like 'blocky' type phase,and the retained austenite is mainly located on the packet boundary and initial austenite grain boundary.The inhomogeneous microstructure causes the experimental optimum quenching temperature corresponding to maximum retained austenite fraction to be higher than the calculation based on CPE(constrained paraequilibrium) model.The product of tensile strength and total tensile elongation is 47.5 GPa%,and tensile strength of 1760 MPa was obtained for the steel with carbon content of 0.51 wt%.The TRIP(transformation induced plasticity) effects of the large fractioned metastable austenite make a main contribution to the high ductility improvement,and the martensitic matrix provides high strength.
基金supported by the National Basic Research Program of China ("973" Program) (Grant No. 2010CB630805)the National Natural Science Foundation of China (Grant No. 51071089)
文摘On-line thermo mechanical controlled processing(TMCP) was conducted to develop the third generation high strength low alloy(HSLA) steel with high toughness economically.The ultra-low carbon content ensured a high level of upper shelf energy while ultrafine lath martensitic structure transformed from super-thin pancaked austenite during controlled rolling and cooling.The reduction of martensite block size decreased ductile-to-brittle transition temperature(DBTT) and compensated the strength loss due to carbon reduction.Consequently,the excellent balance of strength and toughness values was obtained as 950-1060 MPa for yield strength,180 J for Charpy V-notch impact absorbed energy at 30℃,which is much superior to that of traditional martensitic steel.Two mechanisms for the refinement of lath martensite block were proposed:One is the austenite grain refinement in the direction of thickness,and the other is the reduction in the fraction of sub-block boundaries with small misorientation and the increase in the fraction of block boundaries with large misorientation,possibly due to austenite hardening.
