产品族形态设计研究及系统构造

首先在分析了产品形态构成的基础上,建立了产品族形态变型的三层变型结构模型:配置层、空间布局层、型面变型层;其次构建了产品族形态变型平台,包括两个侧面:人机侧面、比例侧面;最后提出了产品族形态设计系统集成方案并构造了相应的软件系统。

MORPHOLOGICAL MODEL FOR RHEOLOGICAL PROPERTIES OF PLANT CELL SUSPENSION CULTURE SYSTEM

This paper puts forward a physical and mathematical model for the rheological properties of a plant cell suspension culture system.The model can explain why the system is pseudoplastic satisfactorily,thus the rheological properties of the system as the effect of the flow behavior index on plant cell concentration are interpreted correctly and the mechanism of the rheological properties of the system is further understood.Therefore the model can be applied in the technological design and optimum conditions of the system and the reformation,evaluation and scale up of reactors.

Progress in Studies on the Equilibrium Shape of Headland-bay Shoreline

Research on the laws controlling the shoreline equilibrium shape has been one important topic of studying the evolvement and stabilization of sandy coasts. After a brief review of the progress on the equilibrium shape laws research, five models are introduced in detail. Advantages and disadvantages of these models are then discussed, which leads to the conclusion that the empirical formula integrating with analysis of mechanism should be the future direction of study on the headland-bay equilibrium shape laws. Finally, the importance of the study on the equilibrium shape of headland-bay in China is also discussed.

Modeling of time dependent subsidence for coal and ore deposits

Coal and ore underground mining generates subsidence and deformation of the land surface. Those defor- mations may cause damage to buildings and infrastructures. The environmental impact of subsidence will not be accepted in the future by the society in many countries. Especially acceptance of the ground deformations decreases every year there, where the mining regions are densely urbanized, the The only solution is to limit the subsidence or its impact on the infrastructure. The first is not rentable for the mining industry, the second depends on the precise subsidence prediction and good preventing management involved in the mining areas. The precision of the subsidence prediction depends strictly on the mathematical model of the deformation phenomenon and on the uncertainty of the input data. The subsidence prediction in the geological conditions of the raw materials used to be made on the basis of numerical modeling or the stochastic models. A modified solution of the stochastic model by Knothe will be presented in the paper. The author focuses on the precise description of the deposit shape and on the time dependent displacements of the rock mass. A two parameters＇ time function has been introduced in the algorithm.

Karyological and morphometric variation of the North African green frog Pelophylax saharicus (Anura) in northeastern Africa

Morphometric variation ofPelophylax saharicus was analysed using univariate and multivariate statistics, with both traditional and geometric morphometrics, based on 148 specimens from four different geographical localities in Tunisia and Algeria. The results show the existence of three morphotypes in Tunisia and one in Algeria, and indicate a significant degree of variation in morphometric characters between regions. Specimens from the southernmost region have the smallest body size and the greatest morphometrie divergence from other populations. This pattern of morphometric variation probably results from phenotypic plasticity in response to local environmental factors. The results of our chromosomal study （C-, Ag-NOR-, endonuclease digestion, DAPI, CMA3 and Q-banding） reveal this species to exhibit the plesiomorphic Pelophylax karyotype of 2n=26 biarmed chromosomes and NORs on the eleventh pair. Similarities and differences of the North African green frog are discussed in relation to the different forms of data collected （chromosomal, morphometric, ecological） [Current Zoology 56 （6）： 678~586, 2010].

Static-deformation based fault diagnosis for damping spring of large vibrating screen

Based on the statics theory, a novel and feasible twice-suspended-mass method(TSMM) was proposed to deal with the seldom-studied issue of fault diagnosis for damping springs of large vibrating screen(LVS). With the static balance characteristic of the screen body/surface as well as the deformation compatibility relation of springs considered, static model of the screen surface under a certain load was established to calculate compression deformation of each spring. Accuracy of the model was validated by both an experiment based on the suspended mass method and the properties of the 3D deformation space in a numerical simulation. Furthermore, by adopting the Taylor formula and the control variate method, quantitative relationship between the change of damping spring deformation and the change of spring stiffness, defined as the deformation sensitive coefficient(DSC), was derived mathematically, from which principle of the TSMM for spring fault diagnosis is clarified. In the end, an experiment was carried out and results show that the TSMM is applicable for diagnosing the fault of single spring in a LVS.

Hot deformation behaviors and dynamic recrystallization mechanism of Ti-35421 alloy inβsingle field

Hot deformation behaviors and microstructure evolution of Ti-3Al-5Mo-4Cr-2Zr-1Fe(Ti-35421)alloy in theβsingle field are investigated by isothermal compression tests on a Gleeble-3500 simulator at temperatures of 820-900°C and strain rates of 0.001-1 s^(-1).The research results show that discontinuous yield phenomenon and rheological softening are affected by the strain rates and deformation temperatures.The critical conditions for dynamic recrystallization and kinetic model of Ti-35421 alloy are determined,and the Arrhenius constitutive model is constructed.The rheological behaviors of Ti-35421 alloys aboveβphase transformation temperature are predicted by the constitutive model accurately.The EBSD analysis proves that the deformation softening is controlled by dynamic recovery and dynamic recrystallization.In addition,continuous dynamic recrystallization is determined during hot deformation,and the calculation model for recrystallization grain sizes is established.Good linear dependency between the experimental and simulated values of recrystallized grain sizes indicates that the present model can be used for the prediction of recrystallized grain size with high accuracy.

Analysis of Morphological Processes in a Disturbed Gravel-Bed River （Piave River）： Integration of LiDAR Data and Colour Bathymetry

The magnitude of river morphological changes are better analyzed through the use of quantitative approaches, wherein resolution accuracy and uncertainty assessment are treated as crucial key-factors. In this sense, the creation of precise DEMs （Digital Elevation Models） of rivers represents an affordable tool to analyze geomorphic variations and budgets, except for wetted areas, where reliable channel digitalization can normally be obtained only using expensive bathymetric surveys. The proposed work aims at improving channel surface models without having available bathymetric sensors, by deriving dry areas elevations from LiDAR data and water depth of wetted areas from aerial photos through a predictive depth-colour relationship. The methodology was applied to two different sub-reaches of the Piave River, a gravel-bed river which suffered severe flood events in 2010. Erosion and deposition patterns were identified through DEM differencing, showing a predominance of scour processes which can lead to channel instability situations. The bathymetric output was compared to other previously-derived models confirming the accuracy of the in-channel elevation estimates. Finally, a discussion on the role played by longitudinal protections during the studied flood events is proposed, focusing the attention on the incidence of two major bank erosions that removed significant volumes of stable areas.

Parameter Variations of Identified Model for Static Deformation Analysis of Arch Dam

The structural health monitoring of a dam is important for maintaining the safe operation and longevity of the dam system. The structural health of a large dam can be monitored from the measured static deformation. This paper presents an investigation of the parameter variations of the identified model of the measured long-term static deformation for the structural health monitoring of Fui-Tsui Dam, which is located in a very active seismic zone of Taiwan. The measured static deformation is characterized as a function of the measured physical parameters, including the effects of hydrostatic pressure and temperature variation. The identified parameters, associated with the effects of hydrostatic pressure and temperature variation, change with environmental factors, such as flooding, earthquake and foundation change.

Morphology and survival of cryopreserved-thawed ovarian tissues after heterotopic autotransplantation

Objective： The aim of our study was to observe the survival and morphological changes of thawed ovarian tis- sues after heterotopic transplantation. Methods： Twenty SPF-SD female rats （5-6 weeks old） were equally randomized into the control group and experimental group. In control group, the freshly isolated ovaries were fixed in formalin. In experimental group, the freshly isolated ovaries were vitrified immediately and cut into thin slices. After stored in liquid nitrogen for 21 days, the tissues of experimental group were rapidly thawed and transplanted into back muscles of rats for 2 or 4 weeks, respectively. After that, all rats in experimental group were sacrificed and the ovarian tissues were collected and fixed in 4% formaldehyde solution. Then the ovarian tissues were stained with HE and observed under the light confocal microscope. Re- suits： With the naked eyes, there was no specific alteration except the size reduction with color changing. Under microscopy, we found normal cortex and medulla in the ovary, and the primordial follicles and follicles in various stages were observed in the cortex. The normal oocytes in ovarian tissues of experimental group were significant decreased than in the control group. Conclusion： The ovarian tissues survive well in experimental group and there is no significant difference in the proportion of follicles between different times （2 and 4 weeks） after grafting. Our results suggest that thawed ovarian tissues could survive after heterotopic transplantation into back muscles of rat models and maintain their morphology and function.

Morphological Evolution of a Void under Thermal and Mechanical Loads

A model for the morphological evolution of a void under thermal and mechanical loads is established, and the thermodynamics potential of the model is given based on energy principle. Thus, the path and the bifurcation condition of the morphological evolution of the void are described, which gives some insight into the reliability of the interconnect under combined thermal and mechanical loads.

Characteristics of dental morphology in the Xinjiang Uyghurs and correlation with the EDARV370A variant

Teeth are one of the most important materials for anthropological studies because they are likely to be preserved in ancient remains.While the frequencies of dental characteristics can provide clues to the phylogeny of populations,genetic studies at the individual level can further reveal the biological mechanisms and evolutionary context of dental characteristics.In this study,by analyzing 38 dental characteristics of 242 Xinjiang Uyghur individuals,we found that(i)the dental characteristics of the Uyghurs showed evidence of admixture between European and East Asian populations.The admixture proportions were in line with those previously reported in population genetic studies;(ii)the Xinjiang Uyghur dental characteristics formed three clusters in pairwise correlation analysis.One of the main clusters consisted of characteristics including incisor shoveling,double shoveling and mesial ridge;and(iii)all the characteristics in this cluster were significantly correlated with the genetic variant EDARV370A.The extracted composite phenotypic factor was also significantly associated with EDARV370A,which explained 18%of the total phenotypic variance.This indicated a pleiotropic effect,i.e.,the same genetic factor affects a number of dental characteristics at the same time.Our results confirmed that EDARV370A,a genetic variant that first originated in East Asia about 30000 years ago,played an important role in incisor shoveling in East Asia.This finding suggested that incisor shoveling in modern humans in East Asia is likely to have appeared after the late Pleistocene.

Control of large angle maneuvers for the flexible solar sail

Solar sail is a new type of spacecraft for deep space exploration,which flies by the pressure of sunlight.The attitude of the sail determines its orbit,so altitude control plays an important role in the mission.However,the large flexible structure leads to some difficulty in attitude control.This paper establishes the reduced dynamic model of a flexible solar sail with foreshortening deformation,and coupling with its attitude and vibration.As usual,large angle maneuvering will lead to the vibration of flexible structure,so the time optimal control of solar sail maneuvering is considered.Bang-Bang control of the solar sail generates large amplitude and sustained vibration,while the combined control based on input shaping can eliminate the vibration efficiently.With the comparison of two reduced models,it is demonstrated that the choice of two models depends on the attention to the stretching deformation.

Establishment of a blunt impact-induced brain injury model in rabbits

Objective： To establish an animal model to replicate the blunt impact brain injury in forensic medicine. Methods： Twenty-four New Zealand white rabbits were randomly divided into control group （n=4）, minor injury group （n：10） and severe injury group （n=10）. Based on the BIM- II Horizontal Bio-impact Machine, self-designed iron bar was used to produce blunt brain injury. Two rabbits from each injury group were randomly selected to monitor the change ofintracranial pressure （ICP） during the impact- ing process by pressure microsensors. Six hours after injury, all the rabbits were dissected to observe the injury mor- phology and underwent routine pathological examination. Results： Varying degrees of nervous system positive signs were observed in all the injured rabbits. Within 6 hours, the mortality rate was 1/10 in the minor injury group and 6/10 in the severe injury group. Morphological changes con-sisted of different levels of scalp hematoma, skull fracture, epidural hematoma, subdural hematoma, subarachnoid hemo- rrhage and brain injury. At the moment of hitting, the ICP was greater in severe injury group than in mild injury group; and within the same group, the impact side showed positive pressure while the opposite side showed negative pressure. Conclusions： Under the rigidly-controlled experimental condition, this animal model has a good reproducibility and stable results. Meanwhile, it is able to simulate the morphology of iron strike-induced injury, thus can be used to study the mechanism of blunt head injury in forensic medicine.