采空沉陷湿地形成动力过程的初步研究

因采空、沉陷和积水所形成的湿地是采矿沉陷区扰动了区域性地表水和地下水循环而产生了季节性或永久性积水而形成的一种湿地类型。从采空沉陷湿地形成的主要动力过程入手,研究其形成原因,明确其主要湿地特征。结果表明,采空积水沉陷地是在人类对地下矿层开采后,上覆岩层发生弯曲变形、断裂、位移,导致地面塌陷下沉,形成比采矿范围大得多的负地貌(低洼地);同时原有地表水系统因地表沉陷被破坏,使采矿沉陷区演变为局部汇水区,导致季节性或永久性积水;最终使其出现了沼泽化水生生态系统等特征,形成了一种新型人工湿地。

峰丛洼地形成动力过程与水资源开发利用

对喀斯特的重要地貌景观——峰丛洼地 (锥状喀斯特 ) ,从水文地貌学观点分析论述了其气候形态学特征、地貌结构、地貌发育演化动力过程以及与内源水作用过程相关的多元水赋存特点及其水资源开发利用形式。

强化第二深度空间金属矿产资源探查,加速发展地球物理勘探新技术与仪器设备的研制及产业化

中国正处在快速工业化和经济腾飞的前夜,必须有大量各类金属矿产资源的支撵,当今国内却供给不足.供需矛盾日益尖锐,导致了对外依存度的不断增长.本文从这一前提和解决的途径出发,分析了金属矿产资源形成与聚集的深层过程和动力学响应、地壳深处金属矿产资源探查的科学依据与例证、地球物理方法和技术支撑.据此提出:(1)当今国家所公布的资源量系指第一深度空间(0～500m)找矿、勘探和开发的资源量,尚不能完全表征全国金属矿产资源量的全部;(2)实施第二深度空间(500～2000m)金属矿产资源的找矿、勘探和开发已迫不及待;(3)在深部金属矿产资源的探查和开发中,必须依靠新的认识和新的理念,采用先进的、高精度的地球物理探测方法和技术,并建立起有自主特色的深部矿产资源探查理论、方法和技术体系.(4)引进技术不等于引进创新思维,更不等于引进创新能力;(5)加速发展和研究地球物理勘探新技术与仪器设备,并逐步产业化.

Characteristics of unsteady lubrication film in metal-forming process with dynamic roll gap

Based on the theory of unsteady hydrodynamic lubrication and relevant mathematic and physical methods, a basic model was developed to analyze the unsteady lubrication film thickness, pressure stress and friction stress in the work zone in strip rolling. The distribution of pressure stress and friction stress in the work zone was obtained. A numerical simulation was made on a 1850 cold rolling mill. The influence of back tension stress and reduction on the distribution of pressure stress and friction stress between the roll gaps was qualitatively analyzed by numerical simulation. The calculated results indicate that the higher the back tension, the lower the pressure stress and the friction stress in the work zone, and the largest friction stresses are obtained at the inlet and outlet edges. The pressure and friction gradients are rather small at high back tension. The pressure-sensitive lubricant viscosity increases exponentially with the increase of pressure. The unsteady lubrication phenomenon in the roll bite is successfully demonstrated.