For classifying unknown 3-D objects into a set of predetermined object classes, a part-level object classification method based on the improved interpretation tree is presented. The part-level representation is implem...For classifying unknown 3-D objects into a set of predetermined object classes, a part-level object classification method based on the improved interpretation tree is presented. The part-level representation is implemented, which enables a more compact shape description of 3-D objects. The proposed classification method consists of two key processing stages： the improved constrained search on an interpretation tree and the following shape similarity measure computation. By the classification method, both whole match and partial match with shape similarity ranks are achieved; especially, focus match can be accomplished, where different key parts may be labeled and all the matched models containing corresponding key parts may be obtained. A series of experiments show the effectiveness of the presented 3-D object classification method.展开更多
An integrated system FSOP2D,including modules for the shape optimal modeling,structural analysis,sensitivity analysis,optimal method library and post- processing,is developed.By selecting fictitious loads as the desig...An integrated system FSOP2D,including modules for the shape optimal modeling,structural analysis,sensitivity analysis,optimal method library and post- processing,is developed.By selecting fictitious loads as the design variables that has a linear relationship with the grid point locations and using design sensitivity analysis of the domain method,it is easier to solve the velocity field.In the course of optimal iterations,mesh distortion is kept to a minimum,sensitivity derivatives of object function,stress constraints and displacement constraints are derived.Computation of sensitivity analysis is achieved in the system.Two engineering examples are used to prove the system's effectiveness,the optimal results can successfully be obtained by lesser number of iterations.展开更多
Additive manufacturing technologies enable the production of parts by successively adding layers. In powder-based technologies, each powder layer is selectively solidified following the respective cross-section of the...Additive manufacturing technologies enable the production of parts by successively adding layers. In powder-based technologies, each powder layer is selectively solidified following the respective cross-section of the parts either by the application of high-energy radiation or by the selective deposition of binder. By repeating the steps of layer deposition and selective solidification, parts are fabricated. The layer-wise build-up and the ambient conditions lead to warpage of the parts due to the temporarily and locally uneven distribution of shrinkage throughout the part. This leads to deviations in shape and dimension. The development of these technologies fosters a change fi＇om prototyping to manufacturing applications, As a consequence, higher standards regarding the shape and dimensional accuracy are required. Therefore, new strategies to minimize the resulting deformations are necessary to reduce rejects and widen the range of applications of the described technologies. In this paper, an empirical, a knowledge-based and a simulative approach for warpage compensation are introduced. They are all based on the pre-deformation of the digital 3D part geometry inverse to the expected deformation during manufacturing. The aim of the research is the development of a comprehensive method that enables users to improve their part-quality by supporting the pre-deformation process. Contrary to existing work, this method should not be process-specific but cover a wide range of additive manufacturing techniques. Typical forms of deformation of the processes laser sintering, laser beam melting and 3D printing （powder-binder） are presented and compensation strategies are disenssed. Finally, an outlook on the ongoing research is given.展开更多
In general, to reconstruct the accurate shape of buildings, we need at least one stereomodel （two photographs） for each building. In most cases, however, only a single non-metric photograph is available, which is us...In general, to reconstruct the accurate shape of buildings, we need at least one stereomodel （two photographs） for each building. In most cases, however, only a single non-metric photograph is available, which is usually obtained either by an amateur, such as a tourist, or from a newspaper or a post card. To evaluate the validity of 3D reconstruction from a single non-metric image, this study analyzes the effects of object depth on the accuracy of dimensional shape in X and Y directions using a single non-metric image by means of simulation technique, as this was considered to be, in most cases, a main source of data acquisition in recording and documenting buildings.展开更多
This study investigates the effects of blade tip geometry on the flow field of a turbine cascade at the incidence angle of 0 degree experimentally. The tests were performed in a low-speed turbine cascade wind tunnel. ...This study investigates the effects of blade tip geometry on the flow field of a turbine cascade at the incidence angle of 0 degree experimentally. The tests were performed in a low-speed turbine cascade wind tunnel. The Reynolds number based on the blade chord was about 172300 at the exit. Traverses of the exit flow field were made in order to measure the overall performance. The effects of using fiat tip and grooved tip with a chord-wise channel were studied. The case with the flat tip is referenced as the baseline. The tip clearances are all 1 mm measuring 0.84 percent of the blade span. The depth of channel is 2mm.The flow field at 10% chord downstream from the cascade trailing edge was measured at 38 span-wise positions and 26 pitch-wise positions using a mini five-hole pressure probe. The static pressure distribution on the tip end wall is measured at 16 pitch-wise stations and 17 chord-wise stations. Results show that there exists great pressure gradient in the pressure side for the fiat tip and the pressure side squealer tip, which means strong leakage flow. The pressure gradient from the pressure side to the suction side is greatly decreased for the grooved tip, and the resulting leakage flow is weaker. The core of the leakage vortex moves closer to the suction side for the pressure side squealer tip and farther away from the suction side for the suction side squealer tip. The pressure side squealer has little advantages over the fiat tip in improving the flow capacity and reducing the overall losses. The suction side squealer tip and grooved tip can effectively decrease the intensity of the tip leakage vortex, improve the flow capacity and reduce loss of the turbine cascade passage and the grooved tip performs the best.展开更多
We introduce and study a sequence of geometric invariants for convex bodies in finite-dimensional spaces, which is in a sense dual to the sequence of mean Minkowski measures of symmetry proposed by the second author. ...We introduce and study a sequence of geometric invariants for convex bodies in finite-dimensional spaces, which is in a sense dual to the sequence of mean Minkowski measures of symmetry proposed by the second author. It turns out that the sequence introduced in this paper shares many nice properties with the sequence of mean Minkowski measures, such as the sub-arithmeticity and the upper-additivity. More meaningfully, it is shown that this new sequence of geometric invariants, in contrast to the sequence of mean Minkowski measures which provides information on the shapes of lower dimensional sections of a convex body, provides information on the shapes of orthogonal projections of a convex body. The relations of these new invariants to the well-known Minkowski measure of asymmetry and their further applications are discussed as well.展开更多
基金The National Basic Research Program of China(973Program)(No2006CB303105)the Research Foundation of Bei-jing Jiaotong University (NoK06J0170)
文摘For classifying unknown 3-D objects into a set of predetermined object classes, a part-level object classification method based on the improved interpretation tree is presented. The part-level representation is implemented, which enables a more compact shape description of 3-D objects. The proposed classification method consists of two key processing stages： the improved constrained search on an interpretation tree and the following shape similarity measure computation. By the classification method, both whole match and partial match with shape similarity ranks are achieved; especially, focus match can be accomplished, where different key parts may be labeled and all the matched models containing corresponding key parts may be obtained. A series of experiments show the effectiveness of the presented 3-D object classification method.
文摘An integrated system FSOP2D,including modules for the shape optimal modeling,structural analysis,sensitivity analysis,optimal method library and post- processing,is developed.By selecting fictitious loads as the design variables that has a linear relationship with the grid point locations and using design sensitivity analysis of the domain method,it is easier to solve the velocity field.In the course of optimal iterations,mesh distortion is kept to a minimum,sensitivity derivatives of object function,stress constraints and displacement constraints are derived.Computation of sensitivity analysis is achieved in the system.Two engineering examples are used to prove the system's effectiveness,the optimal results can successfully be obtained by lesser number of iterations.
文摘Additive manufacturing technologies enable the production of parts by successively adding layers. In powder-based technologies, each powder layer is selectively solidified following the respective cross-section of the parts either by the application of high-energy radiation or by the selective deposition of binder. By repeating the steps of layer deposition and selective solidification, parts are fabricated. The layer-wise build-up and the ambient conditions lead to warpage of the parts due to the temporarily and locally uneven distribution of shrinkage throughout the part. This leads to deviations in shape and dimension. The development of these technologies fosters a change fi＇om prototyping to manufacturing applications, As a consequence, higher standards regarding the shape and dimensional accuracy are required. Therefore, new strategies to minimize the resulting deformations are necessary to reduce rejects and widen the range of applications of the described technologies. In this paper, an empirical, a knowledge-based and a simulative approach for warpage compensation are introduced. They are all based on the pre-deformation of the digital 3D part geometry inverse to the expected deformation during manufacturing. The aim of the research is the development of a comprehensive method that enables users to improve their part-quality by supporting the pre-deformation process. Contrary to existing work, this method should not be process-specific but cover a wide range of additive manufacturing techniques. Typical forms of deformation of the processes laser sintering, laser beam melting and 3D printing （powder-binder） are presented and compensation strategies are disenssed. Finally, an outlook on the ongoing research is given.
文摘In general, to reconstruct the accurate shape of buildings, we need at least one stereomodel （two photographs） for each building. In most cases, however, only a single non-metric photograph is available, which is usually obtained either by an amateur, such as a tourist, or from a newspaper or a post card. To evaluate the validity of 3D reconstruction from a single non-metric image, this study analyzes the effects of object depth on the accuracy of dimensional shape in X and Y directions using a single non-metric image by means of simulation technique, as this was considered to be, in most cases, a main source of data acquisition in recording and documenting buildings.
基金funded by the National Natural Science Foundation of China, Grant No. 51161130525 and 51136003supported by the 111 Project, No. B07009
文摘This study investigates the effects of blade tip geometry on the flow field of a turbine cascade at the incidence angle of 0 degree experimentally. The tests were performed in a low-speed turbine cascade wind tunnel. The Reynolds number based on the blade chord was about 172300 at the exit. Traverses of the exit flow field were made in order to measure the overall performance. The effects of using fiat tip and grooved tip with a chord-wise channel were studied. The case with the flat tip is referenced as the baseline. The tip clearances are all 1 mm measuring 0.84 percent of the blade span. The depth of channel is 2mm.The flow field at 10% chord downstream from the cascade trailing edge was measured at 38 span-wise positions and 26 pitch-wise positions using a mini five-hole pressure probe. The static pressure distribution on the tip end wall is measured at 16 pitch-wise stations and 17 chord-wise stations. Results show that there exists great pressure gradient in the pressure side for the fiat tip and the pressure side squealer tip, which means strong leakage flow. The pressure gradient from the pressure side to the suction side is greatly decreased for the grooved tip, and the resulting leakage flow is weaker. The core of the leakage vortex moves closer to the suction side for the pressure side squealer tip and farther away from the suction side for the suction side squealer tip. The pressure side squealer has little advantages over the fiat tip in improving the flow capacity and reducing the overall losses. The suction side squealer tip and grooved tip can effectively decrease the intensity of the tip leakage vortex, improve the flow capacity and reduce loss of the turbine cascade passage and the grooved tip performs the best.
基金supported by National Natural Science Foundation of China (Grant No. 11271282)the Jiangsu Specified Fund for Foreigner Scholars 2014–2015
文摘We introduce and study a sequence of geometric invariants for convex bodies in finite-dimensional spaces, which is in a sense dual to the sequence of mean Minkowski measures of symmetry proposed by the second author. It turns out that the sequence introduced in this paper shares many nice properties with the sequence of mean Minkowski measures, such as the sub-arithmeticity and the upper-additivity. More meaningfully, it is shown that this new sequence of geometric invariants, in contrast to the sequence of mean Minkowski measures which provides information on the shapes of lower dimensional sections of a convex body, provides information on the shapes of orthogonal projections of a convex body. The relations of these new invariants to the well-known Minkowski measure of asymmetry and their further applications are discussed as well.
