期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Topographic Characteristics for the Geomorphologic Zones in the Northwestern Edge of the Qinghai-Tibet Plateau 被引量:2
1
作者 CHENG Wei-ming ZHAO Shang-min +1 位作者 ZHOU Cheng-hu CHEN Xi 《Journal of Mountain Science》 SCIE CSCD 2013年第6期1039-1049,共11页
Based on geomorphologic and digital elevation model(DEM) data, the topographic characteristics of the northwestern edge of the Qinghai-Tibet Plateau are analyzed. Five representative peaks are first determined accordi... Based on geomorphologic and digital elevation model(DEM) data, the topographic characteristics of the northwestern edge of the Qinghai-Tibet Plateau are analyzed. Five representative peaks are first determined according to the topographic profile maps for the ridge and piedmont lines, and then the topographic gradient characteristics are analyzed according to the representative topographic profile acquisition method.Based on the geomorphologic database data, the regions between the ridge and the piedmont lines are divided into four geomorphologic zones; and the topographic characteristics are finally analyzed for the different geomorphologic zones regions using the DEM data. The research results show that from the piedmont to the ridge, there exist four geomorphologic zones: arid, fluvial, periglacial and glacial. The arid has the lowest elevation, topographic gradient, relief and slope characteristics. The fluvial has lower elevation and the highest topographic gradient, but with lower relief and slope characteristics. With higher elevation, the periglcial has lower topographic gradient, but the highest relief and slope characteristics. The glacial has the highest elevation with higher topographic gradient, relief and slope characteristics. 展开更多
关键词 Topographic characteristics Geomorphologic zone Topographic gradient Topographic profile map Qinghai-Tibet Plateau
下载PDF
原子力显微镜探针耦合变形下的微观扫描力研究 被引量:15
2
作者 张向军 孟永钢 温诗铸 《物理学报》 SCIE EI CAS CSCD 北大核心 2004年第3期728-733,共6页
原子力显微镜 (AFM)的微探针系统是典型的微机械构件 ,它在接触扫描过程处于耦合变形状态 .采用数值模拟方法探究恒力模式下探针耦合变形对微观扫描力信号、微观形貌信号的影响 .研究表明 ,AFM的恒力模式扫描中 ,法向扫描力并不是恒定大... 原子力显微镜 (AFM)的微探针系统是典型的微机械构件 ,它在接触扫描过程处于耦合变形状态 .采用数值模拟方法探究恒力模式下探针耦合变形对微观扫描力信号、微观形貌信号的影响 .研究表明 ,AFM的恒力模式扫描中 ,法向扫描力并不是恒定大小 ,与轴向扫描力存在耦合作用 ,在粗糙峰峰值增加阶段 ,二力均增加 ;在粗糙峰峰值减小阶段 ,二力均减小 ;该耦合作用随形貌坡度、针尖长度等增加而加强 .微观形貌的测试信号和横向扫描侧向力信号受探针耦合变形影响较小 ,但侧向力与形貌斜率密切相关 ,且其极值点与形貌极值点存在位置偏差 。 展开更多
关键词 原子力显微镜 探针悬臂梁 耦合变形 观扫描力 形貌坡度 针尖长度
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部