Four kinds of Ca-based sorbents were prepared by calcination and hydration reactions using different precursors： calcium hydroxide, calcium carbonate, calcium acetate monohydrate and calcium oxide. The CO2 absorption...Four kinds of Ca-based sorbents were prepared by calcination and hydration reactions using different precursors： calcium hydroxide, calcium carbonate, calcium acetate monohydrate and calcium oxide. The CO2 absorption capacity of those sorbents was investigated in a fixed-bed reactor in the temperature range of 350-650 ℃. It was found that all of those sorbents showed higher capacity for CO2 absorption when the operating temperature higher than 450 ℃. The CaAc2-CaO sorbent showed the highest CO2 absorption capacity of 299 mg.g-1. The mor- phology of those sorbents was examined by scanning electron microscope （SEM）, and the changes of composition before and after carbonation were also determined by X-ray diffraction （XRD）. Results indicated that those sorbents have the similar chemical compositions and crystalline phases before carbonation reaction [mainly Ca（OH）2], and CaCO3 is the main component after carbonation reaction. The SEM morphology shows clearly that the sorbent pores were filled with reaction products after carbonation reaction, and became much denser than before. The N2 adsorption-desorption isotherms indicated that the CaAc2-CaO and CaCO3-CaO sorbents have higher specific surface area. lar2er oore volume and anoropriate pore size distribution than that of CaO-CaO and Ca（OH）2-CaO.展开更多
The mechanism of ultrasonic vibration honing Nd-Fe-B has been briefly elaborated after the introduction of the strategic significance of processing Nd-Fe-B. Based on the formation principle of Scanning Electrtmic Micr...The mechanism of ultrasonic vibration honing Nd-Fe-B has been briefly elaborated after the introduction of the strategic significance of processing Nd-Fe-B. Based on the formation principle of Scanning Electrtmic Microscope （SEM）, and at the examination with the aid of SEM to the ultrasonic vibration honing Nd-Fe-B material＇s superficial microscopic topography, the paper discusses the new processing nechanism according to the SEM examination picture. The research indicates that as a result of supersonic high frequency vibration, the path of the abrasion extends at the same time, and the supersonic cavitation effect forms the intense shock-wave, knpacting Nd-Fe-B material＇s intemal surface, providing the supersonic energy for the superticial abrasive dust＇s dimination, which directly explain that the honing processing efficiency is enhanced, and the processing surface roughness is high.展开更多
基金Supported by the National Natural Science Foundation of China （21006053）, the Fundamental Research Funds for the Central Universities （65010551） and Special Projects of Environmental Protection （2009ZX07208）.
文摘Four kinds of Ca-based sorbents were prepared by calcination and hydration reactions using different precursors： calcium hydroxide, calcium carbonate, calcium acetate monohydrate and calcium oxide. The CO2 absorption capacity of those sorbents was investigated in a fixed-bed reactor in the temperature range of 350-650 ℃. It was found that all of those sorbents showed higher capacity for CO2 absorption when the operating temperature higher than 450 ℃. The CaAc2-CaO sorbent showed the highest CO2 absorption capacity of 299 mg.g-1. The mor- phology of those sorbents was examined by scanning electron microscope （SEM）, and the changes of composition before and after carbonation were also determined by X-ray diffraction （XRD）. Results indicated that those sorbents have the similar chemical compositions and crystalline phases before carbonation reaction [mainly Ca（OH）2], and CaCO3 is the main component after carbonation reaction. The SEM morphology shows clearly that the sorbent pores were filled with reaction products after carbonation reaction, and became much denser than before. The N2 adsorption-desorption isotherms indicated that the CaAc2-CaO and CaCO3-CaO sorbents have higher specific surface area. lar2er oore volume and anoropriate pore size distribution than that of CaO-CaO and Ca（OH）2-CaO.
基金supported by The Natural Science Foundation of China(50975265)The Natural Science Foundation of Shanxi Province of China(2007011071)Program for the Top Young Academic Leaders of Higher Learning Institutions of Shanxi(20080205ZX)
文摘The mechanism of ultrasonic vibration honing Nd-Fe-B has been briefly elaborated after the introduction of the strategic significance of processing Nd-Fe-B. Based on the formation principle of Scanning Electrtmic Microscope （SEM）, and at the examination with the aid of SEM to the ultrasonic vibration honing Nd-Fe-B material＇s superficial microscopic topography, the paper discusses the new processing nechanism according to the SEM examination picture. The research indicates that as a result of supersonic high frequency vibration, the path of the abrasion extends at the same time, and the supersonic cavitation effect forms the intense shock-wave, knpacting Nd-Fe-B material＇s intemal surface, providing the supersonic energy for the superticial abrasive dust＇s dimination, which directly explain that the honing processing efficiency is enhanced, and the processing surface roughness is high.
