零件表面形状全场非接触测量的自动化技术

利用移相方法,结合视频技术和计算机技术设计了影象云纹数据自动处理系统。研究了影象云纹法的实时测量和数据的自动处理方法及技术。对典型零件的测量,得到满意的结果。

First-principles thermodynamics of metal-oxide surfaces andinterfaces:A case study review

An important step for achieving the knowledge-based design freedom on nano-and interfacial materials is attained by elucidating the related surface and interface thermodynamics from the first principles so as to allow engineering the microstructures for desired properties through smartly designing fabrication processing parameters.This is demonstrated for SnO2 nano-particle surfaces and also a technologically important Ag-SnO2 interface fabricated by in-situ internal oxidation.Based on defect thermodynamics,we first modeled and calculated the equilibrium surface and interface structures,and as well corresponding properties,as a function of the ambient temperature and oxygen partial pressure.A series of first principles energetics calculations were then performed to construct the equilibrium surface and interface phase diagrams,to describe the environment dependence of the microstructures and properties of the surfaces and interfaces during fabrication and service conditions.The use and potential application of these phase diagrams as a process design tool were suggested and discussed.

Computer Simulation of Compensation Method for Infrared Focal Plane Array

A major motivation for this work is to investigate a method of computer simulation for compensating fixed pattern noise of the infrared focal plane arrays. A mathematical model of the output signal of focal plane array was established; a compensating algorithm utilizing reference source was derived and simulating programs were designed. The images of compensating process verify the influence of nonuniformity of responsibility and offset on fixed pattern noise. The result show that simulating method of investigating compensation technology for focal plane arrays is feasible, the generated images and methods can be used to the study of image recognition.

Water quality forecast through application of BP neural network at Yuqiao reservoir

This paper deals with the study of a water quality forecast model through application of BP neural network technique and GUI (Graphical User Interfaces) function of MATLAB at Yuqiao reservoir in Tianjin. To overcome the shortcomings of traditional BP algorithm as being slow to converge and easy to reach extreme minimum value,the model adopts LM (Leven-berg-Marquardt) algorithm to achieve a higher speed and a lower error rate. When factors affecting the study object are identified,the reservoir's 2005 measured values are used as sample data to test the model. The number of neurons and the type of transfer functions in the hidden layer of the neural network are changed from time to time to achieve the best forecast results. Through simulation testing the model shows high efficiency in forecasting the water quality of the reservoir.

Estimation of Ground Deformation Caused by the Earthquake (M7.2) in Japan,2008,from the Geomorphic Image Analysis of High Resolution LiDAR DEMs

In this study, a new method for quantitative and efficient measurement for the ground surface movement was developed. The feature of this technique is to identify geomorphic characteristics by image matching analysis, using the intelligent images made from high resolution DEM(Digital Elevation Model). This method is useful to extract the small ground displacement where the surface shape was not intensely deformed.

Zigbee/Google Earth based assisted driving system in mining

The Assisted Driving System (ADS) for haul trucks operating in surface mining and construction sites is to reduce accidents related to low visibility conditions. This system is based on the GPS, Zigbee, and the Google-Earth engine as the graphic interface and mine-mapping server. The system has the capability to pin-point and track vehicles in real time using a 3D interface, which is based on user-based AutoCAD mine maps using the Google-Earth graphics interface. All equipped vehicles are shown in a 3D mine map stored in a local server through a wireless network. When low visibility conditions are present, the system indicates available exit/escape routes for driver safety. The ADS potentially increases reliability and reduces uncertainty in open pit mining operations.

An Adaptable Walking-skid for Seabed ROV under Strong Current Disturbance

This paper proposed a new concept of an adaptable multi-legged skid design for retro-fitting to a remotely-operated vehicle （ROV） during high tidal current underwater pipeline inspection. The sole reliance on propeller-driven propulsion for ROV is replaced with a proposed low cost biomimetic solution in the form of an attachable hexapod walking skid. The advantage of this adaptable walking skid is the high stability in positioning and endurances to strong current on the seabed environment. The computer simulation flow studies using Solidworks Flow Simulation shown that the skid attachment in different compensation postures caused at least four times increase in overall drag, and negative lift forces on the seabed ROV to achieve a better maneuvering and station keeping under the high current condition （from 0.5 m/s to 5.0 m/s）. A graphical user interface is designed to interact with the user during robot-in-the-loop testing and kinematics simulation in the pool.

Numerical Calculation of Channel Dredging Volume Using 3D Digital Stratum Model

Prediction of channel dredging volume is critical for project cost estimation. However, many proposed approximate methods are not accurate. This paper presents a novel numerical method to accurately calculate the dredg- ing volume using a 3D stratum model (DSM) and a channel surface model. First, the 3D DSM is constructed rapidly yet accurately from non-uniform rational B-splines (NURBS) surfaces through Boolean operation between a physical terrain model and a stratum surfaces model. Then, a parametric channel surface model is built from cross-section data and a channel center line using code implemented in the VC++ programming language. Finally, the volumes of different types of physical stratums can be calculated automatically and hierarchically to determine the dredging volume. Practical application shows that the DSM method is more precise and faster compared to the section method, and that the implementation of the developed software provides an interactive graphical user interface and visual presentation.

Bacterial graphical user interface oriented by particle swarm optimization strategy for optimization of multiple type DFACTS for power quality enhancement in distribution system

This study proposes a graphical user interface(GUI) based on an enhanced bacterial foraging optimization(EBFO) to find the optimal locations and sizing parameters of multi-type DFACTS in large-scale distribution systems.The proposed GUI based toolbox,allows the user to choose between single and multiple DFACTS allocations,followed by the type and number of them to be allocated.The EBFO is then applied to obtain optimal locations and ratings of the single and multiple DFACTS.This is found to be faster and provides more accurate results compared to the usual PSO and BFO.Results obtained with MATLAB/Simulink simulations are compared with PSO,BFO and enhanced BFO.It reveals that enhanced BFO shows quick convergence to reach the desired solution there by yielding superior solution quality.Simulation results concluded that the EBFO based multiple DFACTS allocation using DSSSC,APC and DSTATCOM is preferable to reduce power losses,improve load balancing and enhance voltage deviation index to 70%,38% and 132% respectively and also it can improve loading factor without additional power loss.

Case study of debris flow disaster scenario caused by torrential rain on Kiyomizu-dera, Kyoto, Japan - using Hyper KANAKO system

This paper presents debris-flow numerical simulations using the Hyper KANAKO system,developed by the authors.The system uses the debris flow simulator KANAKO 2D equipped with a graphical user interface(GUI);hence,a user can easily produce appropriate landform data for simulations using standard laser profiler data,and visualize the results using a GIS.Hyper KANAKO was applied to the streams around Kiyomizu-dera in Kyoto,Japan.Kiyomizu-dera is a famous temple in Japan which is visited by numerous tourists throughout the year.We simulated a disaster scenario of debris flow caused by torrential rain.We set the hydrograph using rainfall intensity data,and set the landform data using information from the Geospatial Information Authority of Japan(GSI) and a digital elevation model(DEM).We evaluated different mesh sizes and also used a digital surface model(DSM) to consider the building heights.The simulation results showed that with small mesh size,the debris flowmoved through the roads,which seems realistic for a disaster situation.When buildings were considered,the flow direction changed,and a 1-m flow depth,which was deeper than in other cases,appeared in the flow path.This may pose a dangerous situation for evacuations.

Virtual Reality Simulation of Fuzzy-logic Control during Underwater Dynamic Positioning

In this paper, graphical-user-interface （GUI） software for simulation and fuzzy-logic control of a remotely operated vehicle （ROV） using MATLABTM GUI Designing Environment is proposed. The proposed ROV＇s GUI platform allows the controller such as fuzzy-logic control systems design to be compared with other controllers such as proportional-integral-derivative （PID） and sliding-mode controller （SMC） systematically and interactively. External disturbance such as sea current can he added to improve the modelling in actual underwater environment. The simulated results showed the position responses of the fuzzy-logic control exhibit reasonable performance under the sea current disturbance.

A Study on the Usability of Semiotics in Graphic Design

Currently, The current flat design has become a mainstream approach is widely used in web design, computer and mobile phone systems, interface design. In graphic design, graphic symbol design is increasingly being taken seriously and use minimalist design symbols often appear in print design plane, PPT presentations, public areas, identity-oriented system like. This paper discusses the design of graphical symbols flat in graphic design use need to make the audience cognitive ability, graphic symbols standardized principles, design principles angles for effective information design to achieve efficient information communication. Materialized mostly graphic image symbols, and mostly flat graphic indicator; flat screen symbol by the proposed development materialized symbol interface evolved. Materialized the graphical interface and the graphical interface is flat coexist and cannot replace each other. During the design, the designer should be based on the advantages and disadvantages of the two styles complement each other interfaces, common graphical interface design services.

Generating Graphic User Interface of Web Applications Using Source Code Generator Based on Dynamic Frames

This paper deals with a problem of application generation together with their Graphic User Interface （GUI）. Particularly, the source code generator based on dynamic frames was improved for more effective specification of GUI. It＇s too demanding for the developers to have specification of the application that contain all physical coordinates and other details of buttons and other GUI elements. The developed solution for this problem is based on post-processing of generated source code using iterators for specifying coordinates and other values of graphic elements. The paper includes two examples of generating web applications and their GUI.

A Method for Calculating Fractal Dimension of Amicrons and Fractal Simulation of Boundary Micro-Topography

A simple and practical method to calculate the fractal dimension （FD） of amicron＇s projective surface profile based on fractal theory is proposed. Taking AI（OH）3 material particles as an example, the scanning electron microscope （SEM） photos of particles were processed using an image.processing software （IPS） Photoshop. Taking the pixel as a fixed yardstick with the enlargement of the size of the particle image, the box-dimension and circumference-area （C-S） methods were used to calculate the FD of the surface profile of the particle. The FD of 1.2623 of the classic Koch curve is obtained, which approximates the true value of 1.2628. The complexities of the object＇s boundary and surface micro-topography are simulated successfully by a generator method.

Process of back pressure deep drawing with solid granule medium on sheet metal

The experimental die apparatus of the solid granules medium forming on sheet metal was designed and manufactured.Typical parts,such as conical,parabolic,cylindrical and square-box-shaped components,were successfully trial-produced as well.According to the analysis of the changing trends of the cross-section shape and the wall thickness during the process,it can be found that the shape of the free deformation zone of the sheet metal,which is the most critical thinning area,can be described as an approximately spherical cap.According to this forming feature,back pressure deep drawing technology with solid granules medium on sheet metal was proposed to restrain drastic thinning at the bottom of the part through the joint friction effect of solid granules medium,the back pressure tringle and the sheet metal.Therefore,the deep drawing limit of the sheet metal is significantly improved.In order to fabricate thin-walled rotary parts with great drawing ratio and complex cross-sections,a finite element model based on the material property test of the solid granules medium was established to optimize the scheme of the back pressure deep drawing.The effects on the forming performance of sheet metal from back pressure load and the approach of blank holding control were analyzed through this model.

Unsaturated expansive soil fissure characteristics combined with engineering behaviors

The relationship among the surface fissure ratio, moisture content, seepage coefficient and deformation modulus of field unsaturated expansive soil in Nanning, Guangxi Province, China, was obtained by a direct or indirect method. Digital images of expansive soil of the surface fissure with different moisture contents were analyzed with the binarization statistic method. In addition, the fissure fractal dimension was computed with a self-compiled program. Combined with in situ seepage and loading plate tests, the relationship among the surface fissure ratio, moisture content, seepage coefficient and deformation modulus was initially established. The surface fissure ratio and moisture content show a linear relation, ＂y=-0.019 1x＋1.028 5＂ for rufous expansive soil and ＂y=-0.07 1x＋2.610 5＂ for grey expansive soil. Soil initial seepage coefficient and surface fissure ratio show a power function relation, ＂y=1× 10^-9exp（15.472x）＂ for rufous expansive soil and ＂y=5× 10^-7exp（4.209 6x）＂ for grey expansive soil. Grey expansive soil deformation modulus and surface fissure ratio show a power fimction relation of ＂y=3.935 7exp（0.993 6x）＂. Based on the binarization and fractal dimension methods, the results show that the surface fissure statistics can depict the fissure distribution in the view of two dimensions. And the evolvement behaviors of permeability and the deformation modulus can indirectly describe the developing state of the fissure. The analysis reflects that the engineering behaviors of unsaturated expansive soil are objectively influenced by fissure.

Effect of 3-aminotriazole on the corrosion of copper in polluted and unpolluted media

The inhibition of copper corrosion in unpolluted or polluted 3.5% NaCl solution in the absence and presence of 3-amino-1, 2, 4-triazole （ATA） as a corrosion inhibitor was studied by using different electrochemical techniques. Aminotriazole （ATA） is well known as corrosion inhibitor for corrosion of copper and aluminum in unpolluted salt water. The influence of 3-aminotriazole （ATA） on the corrosion behavior of copper in unpolluted and polluted environment has been studied using potentiodynamie and potentiostatic polarization methods. Surface morphological examinations such as SEM, EDS and XPS have also been carried out to understand the mechanism of inhibition of corrosion. Electrochemical measurements and morphological results are clearly show that the inhibitor is strongly adsorbed on the copper surface and form a protective film on the copper surface.

Efficient volume preserving approach for skeleton-based implicit surfaces

This paper presents an efficient way to preserve the volume of implicit surfaces generated by skeletons. Recursive subdivision is used to efficiently calculate the volume. The criterion for subdivision is obtained by using the property of density functions and treating different types of skeletons respectively to get accurate minimum and maximum distances from a cube to a skeleton. Compared with the criterion generated by other ways such as using traditional Interval Analysis, Affine Arithmetic, or Lipschitz condition, our approach is much better both in speed and accuracy.

Simple but Dominant： How to Re-shine Depeche Mode on Album Covers After 80＇s

The aim of this paper is to analyze the album covers of English band Depeche Mode after 80＇s according to the principles of graphic design. Established in 1980, the musical style of the band was turned from synth-pop to new wave, from new wave to electronic, dance, and alternative-rock in decades, but their message stayed as it was： A non-hypocritical, humanist, and decent manner against what is wrong and in love sincerely. As a graphic design product, album covers are pre-print design solutions of two dimensional surfaces. Graphic design, as a design field, has its own elements and principles. Visual elements and typography are the two components which should unite with the help of the six main principles which are： unity/harmony; balance; hierarchy; scale/proportion; dominance/emphasis; and similarity and contrast. All album covers of Depeche Mode after 80＇s were designed in a simple but dominant way in order to form a unique style. On every album cover, there are huge color, size, tone, and location contrasts which concluded in simple domination; domination of a non-hypocritical, humanist, and decent manner against what is wrong and in love sincerely.

Automatic GUI Test by Using SIFT Matching

In software development process, the last step is usually the Graphic User In- terface（GUI） test, which is part of the final user experience （UE） test. Traditionally, there exist some GUI test tools in the market, such as Abbot Java GUI Test Framework and Pounder, in which testers pre-configure in the script all desired actions and instructions for the computer, nonetheless requiring too much of invariance of GUI environment; and they require reconfiguration in case of GUI changes, therefore still to be done mostly manually and hard for non-programmer testers to. Consequently, we proposed GUI tests by image recognition to automate the last process; we managed to innovate upon current algorithms such as SIFT and Random Fern, from which we develop the new algorithm scheme retrieving most efficient feature and dispelling inefficient part of each algorithm. Computers then apply the algorithm, to search for target patterns themselves and take subsequent actions such as manual mouse, keyboard and screen I/O automatically to test the GUI without any manual instructions. Test results showed that the proposed approach can accelerate GU! test largely compared to current benchmarks.