The mathematical and simulation models of working head in the deep-sea working environment were built to analyze the effects of cutter-suction flow,cutter-head rotating speed,cutting depth and suction port position on...The mathematical and simulation models of working head in the deep-sea working environment were built to analyze the effects of cutter-suction flow,cutter-head rotating speed,cutting depth and suction port position on the cutter-suction capacity.The efficiency of the cutter-suction is analyzed based on the analysis of the variation law of the solid-phase volume fraction of the flow field,the variation law of the velocity distribution in the flow field and the distribution law of the solid-phase concentration.The results show that the increase of cutter-suction flow can significantly improve the cutter-suction efficiency when it is less than1000m3/h.However,when it is more than1000m3/h,it is helpless.When the cutter-head rotate speed is within the range of10–25r/min,the cutter-suction efficiency stabilizes at about95%.While the speed is greater than25r/min,the cutter-suction efficiency decreases sharply with the increase of cutter-head rotate speed.With the increase of cutting depth,the cutter-suction efficiency first increases and then remains stable and finally decreases.The cutter-suction efficiency remains at about94%when the suction port position deviation ranges from0°to30°,but it has a sharply reduction when the deviation angle is more than30°.展开更多
Boiling flow instability of nitrogen in a vertical tube is experimentally investigated in the present study. The experiments reveal that pressure has a significant effect on the characteristics of the heat flux-mass f...Boiling flow instability of nitrogen in a vertical tube is experimentally investigated in the present study. The experiments reveal that pressure has a significant effect on the characteristics of the heat flux-mass flux type boiling flow instability.First.the pressure has strong effects on both the developing time and the fluctuation amplitude.Especially increasing pressure leads to decrease the fluctuating amplitude of mass flux.Then,the mass flux evolving curves under different pressures feature out a shape like a leaf.The characteristics of the heat flux-mass flux type boiling flow instability under lower pressure are very complicated,however,with increasing pressure,this type of instability is gradually suppressed.展开更多
基金Project(51775561)supported by the National Natural Science Foundation of ChinaProject(20130162110004)supported by the National Doctoral Foundation of China
文摘The mathematical and simulation models of working head in the deep-sea working environment were built to analyze the effects of cutter-suction flow,cutter-head rotating speed,cutting depth and suction port position on the cutter-suction capacity.The efficiency of the cutter-suction is analyzed based on the analysis of the variation law of the solid-phase volume fraction of the flow field,the variation law of the velocity distribution in the flow field and the distribution law of the solid-phase concentration.The results show that the increase of cutter-suction flow can significantly improve the cutter-suction efficiency when it is less than1000m3/h.However,when it is more than1000m3/h,it is helpless.When the cutter-head rotate speed is within the range of10–25r/min,the cutter-suction efficiency stabilizes at about95%.While the speed is greater than25r/min,the cutter-suction efficiency decreases sharply with the increase of cutter-head rotate speed.With the increase of cutting depth,the cutter-suction efficiency first increases and then remains stable and finally decreases.The cutter-suction efficiency remains at about94%when the suction port position deviation ranges from0°to30°,but it has a sharply reduction when the deviation angle is more than30°.
基金the Postdoctoral Scientific Foundation of China(No.20070410722)
文摘Boiling flow instability of nitrogen in a vertical tube is experimentally investigated in the present study. The experiments reveal that pressure has a significant effect on the characteristics of the heat flux-mass flux type boiling flow instability.First.the pressure has strong effects on both the developing time and the fluctuation amplitude.Especially increasing pressure leads to decrease the fluctuating amplitude of mass flux.Then,the mass flux evolving curves under different pressures feature out a shape like a leaf.The characteristics of the heat flux-mass flux type boiling flow instability under lower pressure are very complicated,however,with increasing pressure,this type of instability is gradually suppressed.
