高职教育课程观的影响因素及构建

课程观是课程建设的指导,决定课程改革的方向。在对影响高等职业技术教育课程观各因素深入分析的前提下,提出“以综合职业能力和全面素质为中心”的高等职业技术教育课程观。

中国铜矿供应保障分析

中国是一个铜矿资源储量丰富的国家,但同时也是铜矿消费大国,铜矿供需缺口逐年加大,给国家经济持续、健康发展造成了巨大隐患。通过对中国铜资源概况和铜矿供应保障影响因素的分析,提出了保障中国铜矿安全供给应该注意的若干问题。

Factors affecting phenol adsorption on clay-solidified grouting curtain

Batch experiments were conducted to study the adsorption of phenol on clay-solidified grouting curtain (CSGC) and the effects of contact time,pH and adsorbent concentration on the adsorption were investigated.Under the experimental conditions used,2 d was adequate to determine the equilibrium of phenol adsorption onto CSGC.The amount of phenol adsorbed by CSGC from an initial concentration of 100mg/L was found to be 8.4mg/g.The adsorption process includes particle diffusion and liquid film diffusion,and the latter is the predominating step of the adsorption process.The adsorption ability of CSGC decreased with pH but it increased non-linearly with the CSGC concentration.The optimized concentration for CSGC was found to be 20g/L for the adsorption of 100mg/L phenol.

Mechanics criterion and factors affecting overburden stability in solid dense filling mining

The effect of controlling strata movement in solid filling mining depends on the filling rate of the goal. However, the mechanical property of the overburden in the backfill stope and the designed size of the backfill mining workface should also be considered. In this study, we established a main roof strata model with loads in accordance with the theory of key strata to investigate the stability of the overburden in solid dense filling mining. We analyzed the stress distribution law of the main roof strata based on elastic thin plate theory. The results show that the position of the long side midpoint of the main roof strata failed more easily because of tensile yield, indicating that this position is the area where failure is likely to occur more easily. We also deduced the stability mechanics criterion of the main roof strata based on tensile yield criterion. The factors affecting the stability of the overburden in solid dense filling mining were also analyzed, including the thickness and elasticity modulus of the main roof strata, overlying strata loads, advanced distance and length of workface, and elastic foundation coefficient of backfill body. The research achievements can provide an important theoretical basis for determining the designed size of the solid dense filling mining workface.

High-efficiency acetaldehyde removal during solid-state polycondensation of poly(ethylene terephthalate) assisted by supercritical carbon dioxide

The concentration of acetaldehyde(AA) is the main quality index of poly(ethylene terephthalate)(PET) used in food and drink packaging.A new method for AA removal has been developed by using supercritical carbon dioxide(sc CO2) during the solid-state polycondensation of PET.The influence factors of AA removal including the temperature,pressure,reaction time and the size of pre-polymer particles are systematically studied in this work.The results indicate that it is a highly efficient way to obtain high molecular weight PET with relative low concentration of AA.Correspondingly,the polymerization degree of PET could increase from 27.9 to 85.6 while the concentration of AA reduces from 0.229 × 10^(-6) to 0.055 × 10^(-6) under the optimal operation conditions of 230 °C,8 MPa and size of 0.30–0.45 mm.Thermodynamic performance tests show the increasing extent of PET crystallinity due to the fact that the plasticization of sc CO_2 is not obvious with extended reaction time,therefore the increasing crystallinity has no significant influence on AA removal.SEM observations reveal that the effects of sc CO_(2-) induced plasticization and swelling on PET increase significantly with the decrease of prepolymer size,and the surface of PET becomes more loose and porous in favor of the AA removal.

Factors Influencing Droplet Size of Silicone Oil Emulsion with High Solid Content

A silicone oil emulsion with 60% of solid content was prepared with methyl silicone oil used as the main material by means of the emulsifier-in-oil method.The influence of emulsification conditions on the droplet diameter of silicone oil emulsion was discussed.The experimental results showed that the emulsification method,including the quantity of the emulsifier,the time and temperature of emulsification,the emulsifying water dosage,and the stirring speed,had significant impact on the droplet size.The optimal conditions were identified to achieve a smallest droplet diameter of the emulsion at an emulsifier dosage of 6%,an emulsification temperature of 70 ℃,an emulsification time of 30 min,and a stirring speed of 1100 r/min,with water added in two portions at a ratio of 1:1.The high-solid content silicone oil emulsion with a mean droplet diameter of 2.731 μm was prepared under these conditions that could ensure absence of stratification and floating oil under centrifuging at a speed of 3000 r/min for 30 min.

Study on influence factors of cement-stabilized soil compressive strength

The cement dry jet mixing method has been used to reinforce soft cohesive ground to increase the strength of soft cohesive ground and to decrease its deformation. The study briefly introduces the curing mechanism of cement-soil,presents the factors of influencing on compressive strength,mainly analyses the factors including cement mixing ratio,cement strength grade,curing age,moisture content and soil texture and puts forward some rational proposals at last.

Research on Regional Industrial Solid Waste Comprehensive Utilization Ability Influencing Factors based on Panel Data

On the basis of panel data from 29 provinces and cities throughout the country in 2006-2010, a research is made on factors influencing regional industrial solid waste comprehensive utilization ability through a regression analysis method. Research result shows that a positive influence will generate on the comprehensive utilization ability of the industrial solid waste by three factors： regional industrial soldi waste treatment earning level, regional industrial soldi waste treatment investment level and regional industrial pollution treatment subsidy strength. And this thesis will propose suggestions from improving earning ability, enhartcing treatment investment and increasing government subsidy depending on result of empirical analysis.