金丝楔形键合强度的影响规律分析

金丝楔形键合是一种通过超声振动和键合力协同作用来实现芯片与电路引出互连的技术。现今,此引线键合技术是微电子封装领域最重要、应用最广泛的技术之一。引线键合互连的质量是影响红外探测器组件可靠性和可信性的重要因素。基于红外探测器组件,对金丝楔形键合强度的多维影响因素进行探究。从键合焊盘质量和金丝楔焊焊点形貌对键合强度的影响入手,开展了超声功率、键合压力及键合时间对金丝楔形键合强度的影响研究。根据金丝楔焊原理及工艺过程,选取红外探测器组件进行强度影响规律试验及分析,指导实际金丝楔焊工艺,并对最佳工艺参数下的金丝键合拉力均匀性进行探究,验证了金丝楔形键合强度工艺一致性。

Research on stress distribution between wires of single thigh steel strand

A three-dimensional contact model of 1×7 steel strand was established. Contact point was searched by Splitting-pinball algorithm, and Augmented-Lagrangian algorithm was applied for analysis of contact loads. The exerted tensile loads to the model were analyzed using finite element method. After analyzing calculation results, the laws of steel wire stress distribution in axis direction and in its cross-section were found. Friction coefficients were set as 0.10, 0.11, and 0.12, respec- tively, to obtain the influence law of friction coefficient to steel wire stresses. Research result shows that friction coefficient has significant influence on the shear stress of steel wire. Analyzed the calculation results of steel strand with five different lay pitch multiples and got the influence law of lay pitch multiple to the stresses of steel wire in steel strand. The Von Misses stress of steel wire increases following with the increasing of lay pitches nmltiples, but the increment value is not very prominent. The shear stress of steel wire decreases following the increase of lay pitch multiple, and the changing amplitude is large when lay pitch multiple is small. Finally, carried out a steel strand tensile deformation test and the consistency of test results with the calculation results shows that the selected model is reasonable.

某区低渗透储层压裂投产井评价

为了使针对低渗透滩坝砂储层的压裂改造经济高效,建立一套压前评价决策方法具有非常重要的意义。应用模糊综合评判和灰色关联分析进行压裂候选井的压前评价;对压后产能的影响因素进行分析,总结规律,从而形成一套评价决策方法,指导压裂方案设计。