Research on the imaging of concrete defect based on the pulse compression technique

When the synthetic aperture focusing technology （SAFT） is used for the detection of the concrete, the signal-to-noise ratio （SNR） and detection depth are not satisfactory. Therefore, the application of SAFT is usually limited. In this paper, we propose an improved SAFT technique for the detection of concrete based on the pulse compression technique used in the Radar domain. The proposed method first transmits a linear frequency modulation （LFM） signal, and then compresses the echo signal using the matched filtering method, after which a compressed signal with a narrower main lobe and higher SNR is obtained. With our improved SAFT, the compressed signals are manipulated in the imaging process and the image contrast is improved. Results show that the SNR is improved and the imaging resolution is guaranteed compared with the conventional short-pulse method. From theoretical and experimental results, we show that the proposed method can suppress noise and improve imaging contrast, and can also be used to detect multiple defects in concrete.

Comparison on Winter Wheat Yield Estimating Models Based on Radarsat-2 and HJ Satellite in Huaihe River Region

The establishment of crop yield estimating model based on microwave and optical satellite images can conduct the mutual verification of the accuracy of the reported crop yield and the precision of the estimating model. With Shou County and Huaiyuan County of Anhui Province as the experimental fields of winter wheat producing areas, the linear winter wheat yield estimating models were established by adopting backscattering coefficient and Normalized Difference Vegetation Index（NDVI） based on images from the synthetic aperture radar（SAR）—RDARSAT-2 and HJ satellite photographed in mid-April and early May, 2014, and then comparisons were conducted on the accuracy of the yield estimating models. The accuracies of the yield estimating models established using co-polarized（HH） and cross-polarized（HV） modes of SAR in Jiangou Town, Shou County were 68.37% and 74.01%, respectively, while the accuracies in Longkang Town, Huaiyuan County were 63.10%and 69.10%, respectively. Accuracies of yield estimating models established by HJ satellite data were 69.52% and 66.43% in Shou County and Huaiyuan County, respectively. Accuracies of winter yield estimating model based on HJ satellite data and that based on SAR were closed, and the yield difference of winter wheat in the lodging region was analyzed in detail. The model results laid the foundation and accumulated experience for the verification, parameters correction and promotion of the winter wheat yield estimating model.

Facile Synthesis of Mesoporous γ-Alumina using Starch as Template

Mesoporous alumina was prepared by using starch as the structure-directing template in an aqueous system. The resultant samples were characterized by using different methods such as the X-ray diffractometry,the transmission electron microscopy,the nitrogen adsorption-desorption analysis and the solid MAS NMR. The results showed that the prepared mesoporous γ-alumina had high surface area and uniform pore size distribution,and its specific surface area and the pore size could be tuned by changing the pH value of the starting solution.

基于干涉补偿的螺纹铣刀刃形轮廓修正

针对内螺纹铣削中铣刀与螺纹螺旋面干涉造成的过切问题开展研究。基于MATLAB软件构建出干涉误差模型,调整铣刀刃形轮廓以达到螺纹铣刀少干涉修正。基于UG软件开展内螺纹铣削加工仿真试验,仿真结果与MATLAB软件的结果基本一致,验证了螺纹铣铣刀修正方法的准确性。同时,M45×6与M45×1.5试验结果表明,在其他条件不变的情况下,铣刀径孔比(铣刀直径与螺纹孔径的比值)越大,干涉误差越大;同理,螺距越大,干涉误差也越大。