活塞式航空发动机的优化与标定

联合发动机循环模拟与标定技术建立小型活塞航空发动机动力性和经济性的多目标优化模型。对校验后的BOOST模型进行DOE(Design of Experiment)正交试验,对试验数据进行统计数学建模,并对局部模型误差进行控制,进行响应面模型分析,通过MBC(Model-Based Calibration)工具箱进行优化标定,选用经济适用的NBI(Normal Boundary Inter-section)进行多目标优化.给出了优化的点火提前角、喷油量的MAP图,优化参数对扭矩和燃油消耗等目标的响应面模型,对提升小型航空发动机性能有重要的参考价值.

Application of the Nutrient Cycling Model NuCM to a Forest Monitoring Site Exposed to Acidic Precipitation in China

The nutrient cycling model NuCM is one of the most detailed models for simulating processes that influence nutrient cycling in forest ecosystems. A field study was conducted at Tieshanping, a Masson pine (Pinus massoniana Lamb.) forest site, in Chongqing, China, to monitor the impacts of acidic precipitation on nutrient cycling. NuCM simulations were compared with observed data from the study site. The model produced an approximate fit with the observed data. It simulated the mean annual soil solution concentrations in the two simulation years, whereas it sometimes failed to reproduce seasonal variation. Even though some of the parameters required by model running were measured in the field, some others were still highly uncertain and the uncertainties were analyzed. Some of the uncertain parameters necessary for model running should be measured and calibrated to produce a better fit between modeled results and field data.

Simulated circulations off the Changjiang (Yangtze) River mouth in spring and autumn

The circulations off the Changjiang mouth in May and November were simulated by a three dimension numerical model with monthly averaged parameters of dynamic factors in this paper. The area covers the East China Sea (ECS), Yellow Sea and Bohai Sea. Simulated results show that the circulation off the Changjiang mouth in spring and autumn is mainly the Changjiang runoff and Taiwan Warm Current (TWC). The Changjiang discharge is much larger in May than in November, and the wind is westward in May, and southward in November off the Changjiang mouth. The runoff in May branches in three parts, one eastward flows, the other two flow northward and southward along the Subei and Zhejiang coast respectively. The Changjiang diluted water expands eastward off the mouth, and forms a strong salinity front near the mouth. Surface circulation in autumn is similar to that in winter, the runoff southward flows along the coast, and the northward flowing TWC becomes weaker compared to that in spring and summer. The bottom circulations in May and November are mainly the runoffnear the mouth and the TWC offthe mouth, and the runoff and TWC are greater in May than in November.

Coupled simulation of recirculation zonal firebox model and detailed kinetic reactor model in an industrial ethylene cracking furnace

A coupled system simulating both firebox and reactor is established to study the naphtha pyrolysis in an industrial tubular furnace.The firebox model is based on zone method including combustion,radiation,and convection to simulate heat transfer in the furnace.A two-dimensional recirculation model is proposed to estimate the flow field in furnace.The reactor model integrates the feedstock reconstruction model,an auto-generator of detail kinetic schemes,and the reactor simulation model to simulate the reaction process in the tubular coil.The coupled simulation result is compared with industrial process and shows agreement within short computation time.

3D Simulation of Two-bar Warp-knitted Structures

In this study, 3D computer modeling of simple warp-knitted structures is achieved based on 3D model of warp-knitted loops. Firstly, according to the studying on the geometric structure of warp-knitted loops, Goktepe＇s 3D solid yarn model is developed, and the dimensions of the warp-knitted loops are obtained; then 3D models of stitch defined by eleven given points and in-lay defined by five given points are built with the method of Non-Uniform Rational B-Spline （NURBS） curves and surfaces. Secondly, according to the chain notations of warp-knitted structures, the loop＇s shape can be decided, and with the 3D models the loops can be connected freely and smoothly in some special warp-knitted structures, such as miss-lapping and two- course in-lay. At last, with the tools of Visual C ＋＋ and OpenGL, computer 3D simulation of two-bar warp-knitted fabrics is successfully realized, taking the factor of fabric light and materials into 3D structural model.

Gas-solid flow field numerical simulation of different feeding and returning formations of flue-gas circulating fluidized bed

3D Euler double-fluid model was applied and three different feedstocks and reverts formations were simulated. By calculating and analyzing the state of gas and solid fluxion in absorber using three different methods of the feedstocks and reverts in recirculating fluidized bed, described the behavior of gas and solid through the gas-phase velocity, turbulence intensity, gas-solid sliding velocity, and density of particles. The results show that the feedstocks and reverts enters into absorption tower through two symmetrical feedings and are mixed with flue gas. Based on the respective analysis of each model and the com- parison analysis of the three models, this paper drew conclusions. The turbulence intensity of absorption tower is high, gas-solid sliding speed is big, and granule concentration near the axis is high, which has advantages for desulfurization and im- proving the utilization rate of absorbent.