期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
有源相控阵天线散热特性的数值仿真 被引量:1
1
作者 王勇 卢婷 +3 位作者 吴龙文 熊长武 翁夏 杜平安 《系统仿真学报》 CAS CSCD 北大核心 2018年第9期3526-3532,3545,共8页
为降低数值仿真中热分析模型的建模难度、减少网格数量、节约计算成本,提出利用基于网格优先级建模方法和多级网格划分算法对采用微小流道液冷散热方式的有源相控阵天线模型进行热仿真分析。其中多级网格算法在不改变模型内部的网格数量... 为降低数值仿真中热分析模型的建模难度、减少网格数量、节约计算成本,提出利用基于网格优先级建模方法和多级网格划分算法对采用微小流道液冷散热方式的有源相控阵天线模型进行热仿真分析。其中多级网格算法在不改变模型内部的网格数量,可对天线复杂部件进行贴体网格划分,明显提高网格质量。通过仿真计算和实验结果表明,该分析方法可获得天线关键部件的温度和压力分布。在保证高精度计算条件下,该建模方法和网格划分方法可提高计算效率,具有一定的工程应用价值。 展开更多
关键词 网格优先级建模方法 多级网格划分算法 微/小流道 有源相控阵天线 热仿真
下载PDF
Experimental investigation of nitrogen flow boiling heat transfer in a single mini-channel 被引量:3
2
作者 Bei-chen ZHANG Qing-lian LI +3 位作者 Yuan WANG Jian-qiang ZHANG Jie SONG Feng-chen ZHUANG 《Journal of Zhejiang University-Science A(Applied Physics & Engineering)》 SCIE EI CAS CSCD 2020年第2期147-166,共20页
Flow boiling heat transfer of nitrogen at high subcritical pressure conditions in a single vertical mini-channel with the diameter of 2.0 mm was experimentally investigated.The tested mass flux varied from 530 to 830 ... Flow boiling heat transfer of nitrogen at high subcritical pressure conditions in a single vertical mini-channel with the diameter of 2.0 mm was experimentally investigated.The tested mass flux varied from 530 to 830 kg/(m^2·s),the inlet pressure ranged from 630 to 1080 kPa,and the heat flux ranged from 0 to 223.2 kW/m^2.Effects of the mass flux and the inlet pressure on the nitrogen boiling curve were examined.Results showed that within the limited test conditions,the merging of three boiling curves indicates the dominance of nucleate boiling and the inlet pressure has a positive enhancement on heat transfer performance.Three heat transfer trends were identified with increasing heat flux.At low heat fluxes,the heat transfer coefficient increases first and then decreases with vapour quality.At intermediate heat fluxes,the heat transfer coefficient versus the vapour quality presents an inverted"U"shape.At high heat fluxes,a double valley shape was observed and the partial dry-out in intermittent flow and annular flow helps to interpret the phenomenon.The increasing inlet pressure increases the heat transfer coefficient over a wide range of vapour quality until the partial dry-out inception.The lower surface tension and lower latent heat of evaporation enhance the nucleate boiling for higher inlet pressure.A modified experimental correlation(mean absolute error(MAE)=19.3%)was proposed on the basis of the Tran correlation considering both the nucleate boiling and the partial dry-out heat transfer mechanism. 展开更多
关键词 MINI-CHANNEL NITROGEN Flow boiling Heat transfer Regenerative cooling
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部