蝗虫爪尖能够形成用于稳固附着的机械锁合,抑制蝗虫在捕集滑板表面的滑移行为。为获取用于蝗虫捕集滑板研制的爪尖强度信息,利用自行设计的昆虫微力测试系统测试了蝗虫前足、中足、后足爪尖的剪切力;采用扫描电镜（scanning electron mi...蝗虫爪尖能够形成用于稳固附着的机械锁合,抑制蝗虫在捕集滑板表面的滑移行为。为获取用于蝗虫捕集滑板研制的爪尖强度信息,利用自行设计的昆虫微力测试系统测试了蝗虫前足、中足、后足爪尖的剪切力;采用扫描电镜（scanning electron microscopy,SEM）分析了蝗虫爪尖及其断裂面的微形貌结构与几何特征,计算了爪尖断裂面的截面积,并据此测算了蝗虫爪尖的剪切强度。结果表明爪尖的剪切力介于197.4~243.6 mN,其中前足爪尖的剪切力最大,后足居中,中足最小;爪尖断裂面表现出层状的复合结构且具有显著不同的截面积（10 847.6~13 908.5μm2）;测算结果表明蝗虫爪尖的剪切强度介于14.2~22.5 MPa。该研究可为研制具有良好滑移功能蝗虫捕集滑板提供参考,并可促进灾害蝗虫光电诱导滑移捕集技术的发展。展开更多
A new type of impulsive microthruster and its measurement system were designed for the aim of testing the performance of a basic prototype of solid propellant impulsive microthruster. Two sets of tests were conducted....A new type of impulsive microthruster and its measurement system were designed for the aim of testing the performance of a basic prototype of solid propellant impulsive microthruster. Two sets of tests were conducted. The tests show that the ignitor and the main charge of the microthruster match well, the dynamic and static capability of the test and measurement meets the test requirement and the result is creditable. The measured technical characteristics of the microthruster are that the ignition delay time is shorter than 0 3?ms, the total impulse is over 3?N·s, the operational time is shorter than 16?ms and the mass ratio of the thruster is 0 216.展开更多
A novel microscopic interferometry with ability of frequency-variation and phase-shifting is proposed for microstructures testing. By using acousto-optic technique, sequential carriers can be generated with different ...A novel microscopic interferometry with ability of frequency-variation and phase-shifting is proposed for microstructures testing. By using acousto-optic technique, sequential carriers can be generated with different spatial frequencies so that the temporal phase unwrapping method can be applied for decoding the height information. Combined with phase-shifting technique realized by spatial light modulator, this method is especially suitable for interferometric measurement with high precision and large dynamic range.展开更多
Bi0.5(Na0.85K0.15)0.5TiO3(BNKT15) thin films were synthesized by metal-organic decomposition(MOD) at annealing temperatures of 650,680,710 and 740℃,and the effects of annealing temperature on the microstructure,diele...Bi0.5(Na0.85K0.15)0.5TiO3(BNKT15) thin films were synthesized by metal-organic decomposition(MOD) at annealing temperatures of 650,680,710 and 740℃,and the effects of annealing temperature on the microstructure,dielectric properties,remnant polarization(2Pr) and leakage current density were studied with X-ray diffractometer,atomic force microscope,precision impedance analyzer,ferroelectric analysis station and semiconductor parameter tester.The results show that the thin film annealed at 710℃ exhibits a typical perovskite structure without predominant orientation and a smooth surface with evenly distributed grains.2Pr value(67.4 μC/cm2 under 830 kV/cm) and the leakage current density(1.6×10-6 A/cm2 at 170 kV/cm) for BNKT15 thin film annealed at 710℃ are better than those for thin films annealed at other temperatures.展开更多
文摘A new type of impulsive microthruster and its measurement system were designed for the aim of testing the performance of a basic prototype of solid propellant impulsive microthruster. Two sets of tests were conducted. The tests show that the ignitor and the main charge of the microthruster match well, the dynamic and static capability of the test and measurement meets the test requirement and the result is creditable. The measured technical characteristics of the microthruster are that the ignition delay time is shorter than 0 3?ms, the total impulse is over 3?N·s, the operational time is shorter than 16?ms and the mass ratio of the thruster is 0 216.
基金This work is supported by Natural Science Foundation of China(grants 60275012)Natural Science Foundation of Guangdongprovince (grant 06028584)the Research Project of Science& Technology from Shenzhen Government (Grant No.200619).
文摘A novel microscopic interferometry with ability of frequency-variation and phase-shifting is proposed for microstructures testing. By using acousto-optic technique, sequential carriers can be generated with different spatial frequencies so that the temporal phase unwrapping method can be applied for decoding the height information. Combined with phase-shifting technique realized by spatial light modulator, this method is especially suitable for interferometric measurement with high precision and large dynamic range.
基金Projects(10672139, 10825209, 50872117) supported by the National Natural Science Foundation of ChinaProject(207079) supported by the Key Program of Ministry of Education of China+3 种基金Project(07JJ5002) supported by the Natural Science Foundation of Hunan Province, ChinaProject(08C862) supported by Scientific Research Fund of Hunan Provincial Education Department, ChinaProject([2008]101) supported by Scientific Research Foundation for the Returned Overseas Chinese Scholars, State Education MinistryProject([2007]362) supported by Hunan Prestigious Furong Scholar Award, China
文摘Bi0.5(Na0.85K0.15)0.5TiO3(BNKT15) thin films were synthesized by metal-organic decomposition(MOD) at annealing temperatures of 650,680,710 and 740℃,and the effects of annealing temperature on the microstructure,dielectric properties,remnant polarization(2Pr) and leakage current density were studied with X-ray diffractometer,atomic force microscope,precision impedance analyzer,ferroelectric analysis station and semiconductor parameter tester.The results show that the thin film annealed at 710℃ exhibits a typical perovskite structure without predominant orientation and a smooth surface with evenly distributed grains.2Pr value(67.4 μC/cm2 under 830 kV/cm) and the leakage current density(1.6×10-6 A/cm2 at 170 kV/cm) for BNKT15 thin film annealed at 710℃ are better than those for thin films annealed at other temperatures.
