滑动导轨等部件的微动态特性

1.简介 这份报告给出了关于传统的滑动导轨系统的一些实验结果,同时论及了机构的精密运动控制。 这些年来,诸如导轨、丝杠和其他驱动机构等机械部件的微动态特性,换句话说,就是在很小位移范围内的非线性传递特性。已成为精密机械工程研究的首要问题。超精密仪器、机床和半导体生产系统都对机械部件的控制精度提出了越来越高的要求。

基于虚拟原型的微器件动态特性分析与评价

针对微器件动态特性综合分析评价需求,引入虚拟原型法和智能决策支持系统(IDSS)对微器件动态特性分析与评价过程进行分析研究,建立了微器件虚拟原型的功能模型、知识关联模型及任务流管理机制,进而探讨了虚拟原型的IDSS体系结构和实现机制.在此基础上,对微器件动态特性分析与评价原型平台进行开发,对微泵实例进行应用示范。上述研究为微器件动态特性分析与评价提供了新的方法和软件工具,有效地支持微器件虚拟产品的开发。

Fine Measurements and Analysis of Temperature Gradients in the Wells of the Jinsha River Groundwater Observational Network

Fine measurements have been conducted to temperatures and their gradients of six wells of the Jinsha River Groundwater Observational Network.The results show that the influence depths of sun radiation heat are 50m to 125m,average temperature gradients in the wells range from 0.11 to 2.81℃/hm and most are 1～2℃/hm,and the temperature gradients on varied depth sections of one well are highly changeable.Lithology of strata and their integrity,particularly high-angle crashed fault zones,have imposed major effects on the influence depths of sun radiation heat and temperature gradients of the wells.The micro dynamic characteristics of water temperature,such as coseismic effects,tidal effects and anomalies of the wells prior to earthquakes,probably depend,to a large degree,on the temperature gradients of the depths at which the water temperature sensors are settled.

Development of XY scanner with minimized coupling motions for high-speed atomic force microscope

The design and fabrication processes of a novel scanner with minimized coupling motions for a high-speed atomic force microscope （AFM） were addressed. An appropriate design modification was proposed through the analyses of the dynamic characteristics of existing linear motion stages using a dynamic analysis program, Recurdyn. Because the scanning speed of each direction may differ, the linear motion stage for a high-speed scanner was designed to have different resonance frequencies for the modes, with one dominant displacement in the desired directions. This objective was achieved by using one-direction flexure mechanisms for each direction and mounting one stage for fast motion on the other stage for slow motion. This unsymmetrical configuration separated the frequencies of two vibration modes with one dominant displacement in each desired direction, and hence suppressed the coupling between motions in two directions. A pair of actuators was used for each axis to decrease the crosstalk between the two motions and give a sufficient force to actuate the slow motion stage, which carried the fast motion stage, A lossy material, such as grease, was inserted into the flexure hinge to suppress vibration problems that occurred when using an input triangular waveforrn. With these design modifications and the vibration suppression method, a novel scanner with a scanning speed greater than 20 Hz is achieved.

Experimental investigation on dynamic mechanical characteristics and microstructure of steam-cured concrete

Steam-cured concrete is widely used to manufacture prefabricated units of high-speed railway foundation structure such as girder and track slab.The dynamic mechanical property of steam-cured concrete is one of the key properties affecting service performance of high-speed railway foundation structure.In the present paper,serial macro/micro-experiments were carried out to investigate the dynamic elastic modulus,shear modulus,damping ratio,and microstructure of steam-cured concrete.The relationships between compositions,curing regime,microstructure,and dynamic properties of steam-cured concrete as well as the corresponding mechanisms were discussed.The results indicate that steam-cured concrete in early age has a larger dynamic elastic modulus and shear modulus as well as a smaller damping ratio compared with standard-cured concrete.On the contrary,at a later age a slightly smaller dynamic elastic modulus and a larger damping ratio of steam-cured concrete are observed.Addition of mineral admixture results in a bit lower dynamic elastic modulus and damping ratio of concrete than that of the control specimen without mineral admixtures.The achievements can provide some fundamental suggestions for materials parameters selection during structural design of steam-cured concrete precast element.