Since the CPU of embed system has some limitation in operating speed, a new filter was put forward which implemented mountain template convolution by performing rectangle template convolution two times. It can obtain ...Since the CPU of embed system has some limitation in operating speed, a new filter was put forward which implemented mountain template convolution by performing rectangle template convolution two times. It can obtain time and frequency localization with computational complexity greatly reduced. This algorithm was applied to lightning waveforms (include chopped waveforms) parameter calculation. It simplifies the computation and the results pretreated by this algorithm are in accord with IEC1083-2 completely. It was applied in embed system successfully. Its capability in frequency restraining was researched. The validity of the algorithm was proved in theory when processing lightning waves. The standard sources and the processing results are consistent completely.展开更多
Advanced flow measurement and active flow control need the development of new type devices and systems.Micro-electro-mechanical systems(MEMS) technologies become the important and feasible approach for micro transduce...Advanced flow measurement and active flow control need the development of new type devices and systems.Micro-electro-mechanical systems(MEMS) technologies become the important and feasible approach for micro transducers fabrication.This paper introduces research works of MEMS/NEMS Lab in flow measurement sensors and active flow control actuators.Micro sensors include the flexible thermal sensor array,capacitive shear stress sensor and high sensitivity pressure sensor.Micro actuators are the balloon actuator and synthetic jet actuator respectively.Through wind tunnel test,these micro transducers achieve the goals of shear stress and pressure distribution measurement,boundary layer separation control,lift enhancement,etc.And unmanned aerial vehicle(UAV) flight test verifies the ability of maneuver control of micro actuator.In the future work,micro sensor and actuator can be combined into a closed-loop control system to construct aerodynamic smart skin system for aircraft.展开更多
Atomic force microscope （AFM）, as an important instrument in micro/nano operation, has been widely used to measure sampie＇s height information. However, the so called compression effect, due to force aroused from t...Atomic force microscope （AFM）, as an important instrument in micro/nano operation, has been widely used to measure sampie＇s height information. However, the so called compression effect, due to force aroused from the contact of AFM tip with a sample surface, would result in imprecision of the surface＇s height measurement, i.e., the measured height is lower than expected. Up to now, there is not any effective and rapid method to attenuate this kind of measurement error. Thus, in this paper, an algorithm to obtain high accurate height measurement is proposed. Firstly, the concept of force curve is used to analyze the basic principle of the compression effect. Secondly, an automatic compensation method by fusing the height signal and the deflection signal is proposed. The proposed algorithm can also be used to obtain a surface elasticity image. Finally, in order to validate the proposed method, two experiments are conducted with respect to mufti-wall nano-carbon tubes on a silicon substrate and graphemes on a mica substrate.展开更多
文摘Since the CPU of embed system has some limitation in operating speed, a new filter was put forward which implemented mountain template convolution by performing rectangle template convolution two times. It can obtain time and frequency localization with computational complexity greatly reduced. This algorithm was applied to lightning waveforms (include chopped waveforms) parameter calculation. It simplifies the computation and the results pretreated by this algorithm are in accord with IEC1083-2 completely. It was applied in embed system successfully. Its capability in frequency restraining was researched. The validity of the algorithm was proved in theory when processing lightning waves. The standard sources and the processing results are consistent completely.
基金National Natural Science Foundation of China (No. 90305017No. 50775188No. 51105317)
文摘Advanced flow measurement and active flow control need the development of new type devices and systems.Micro-electro-mechanical systems(MEMS) technologies become the important and feasible approach for micro transducers fabrication.This paper introduces research works of MEMS/NEMS Lab in flow measurement sensors and active flow control actuators.Micro sensors include the flexible thermal sensor array,capacitive shear stress sensor and high sensitivity pressure sensor.Micro actuators are the balloon actuator and synthetic jet actuator respectively.Through wind tunnel test,these micro transducers achieve the goals of shear stress and pressure distribution measurement,boundary layer separation control,lift enhancement,etc.And unmanned aerial vehicle(UAV) flight test verifies the ability of maneuver control of micro actuator.In the future work,micro sensor and actuator can be combined into a closed-loop control system to construct aerodynamic smart skin system for aircraft.
基金supported by the CAS FEA International Partnership Program for Creative Research Teams
文摘Atomic force microscope （AFM）, as an important instrument in micro/nano operation, has been widely used to measure sampie＇s height information. However, the so called compression effect, due to force aroused from the contact of AFM tip with a sample surface, would result in imprecision of the surface＇s height measurement, i.e., the measured height is lower than expected. Up to now, there is not any effective and rapid method to attenuate this kind of measurement error. Thus, in this paper, an algorithm to obtain high accurate height measurement is proposed. Firstly, the concept of force curve is used to analyze the basic principle of the compression effect. Secondly, an automatic compensation method by fusing the height signal and the deflection signal is proposed. The proposed algorithm can also be used to obtain a surface elasticity image. Finally, in order to validate the proposed method, two experiments are conducted with respect to mufti-wall nano-carbon tubes on a silicon substrate and graphemes on a mica substrate.
