期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
晶体塑性模型在微压缩实验误差分析中的应用 被引量:2
1
作者 邵吉吉 张旭 +1 位作者 苗同臣 尚福林 《上海交通大学学报》 EI CAS CSCD 北大核心 2018年第7期860-866,共7页
应用基于位错密度的各向异性晶体塑性理论模型,分析了轴向压缩下Ni单晶微圆柱体的力学响应.将其与实验结果对比,验证了该理论模型的合理性.进而,以单滑移[123]取向Ni金属柱体的微压缩实验为研究对象,分析晶体取向、摩擦力、接触失配以... 应用基于位错密度的各向异性晶体塑性理论模型,分析了轴向压缩下Ni单晶微圆柱体的力学响应.将其与实验结果对比,验证了该理论模型的合理性.进而,以单滑移[123]取向Ni金属柱体的微压缩实验为研究对象,分析晶体取向、摩擦力、接触失配以及几何锥度等常见实验误差因素对其力学测试结果的影响.研究结果表明:在单滑移取向下,晶体取向偏差(2°)导致微圆柱体整体变形从单滑移向多滑移变形转变;受摩擦力影响的横向约束效应可以显著提高塑性应变硬化程度;接触失配导致弹性模量测试值偏低,同时使得塑性剪切滑移主方向发生显著改变;在有锥度(2°~5°)条件下,屈服应力值较无锥度情况偏低. 展开更多
关键词 微压缩实验 误差分析 晶体塑性 有限元
下载PDF
Relationship between mechanical properties and grain size of AZ80 at 350℃ under different strain rates 被引量:1
2
作者 权国政 宋涛 +2 位作者 周一俊 王凤彪 周杰 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2010年第B07期584-588,共5页
The dynamic recrystallization refinement of magnesium alloy AZ80 by compression tests was studied,and its effect on the mechanical properties was investigated.It is observed that the microstructure of the as-cast bill... The dynamic recrystallization refinement of magnesium alloy AZ80 by compression tests was studied,and its effect on the mechanical properties was investigated.It is observed that the microstructure of the as-cast billet with grain size of 240μm becomes refined to about 120,110,94 and 50μm after upsetting at 350℃ under strain rates of 0.01,0.1,1 and 10 s -1 respectively.The changes in the mechanical properties according to grain size show that yield strength significantly decreases with grain size increasing,while strain hardening exponent and micro hardness increase very sharply.Further,the grain size vs strain rate and change in Vickers micro hardness according to the various strain rates show that grain size and micro hardness decrease with strain rate increasing. 展开更多
关键词 magnesium alloy REFINEMENT compression softening behaviour micro hardness
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部