We conducted experiments on specially designed microfluidic chips that generate droplets through a microfluidic ow-focusing approach. The fluid flow in the microfluidic channel produced a shear flow field at low Reyno...We conducted experiments on specially designed microfluidic chips that generate droplets through a microfluidic ow-focusing approach. The fluid flow in the microfluidic channel produced a shear flow field at low Reynolds numbers. The droplets in the microfluidic system exhibited special droplet pattern formations similar to periodic crystal-like lattices because of the competition between shear forces and surface tension. By adjusting the flow rate ratio of the water （droplet phase） to oil （continuous phase） phases and changing the outlet channel widths, the droplets formed monolayer dispersion to double-layer formation to monolayer squeezing when the outlet channel widths were 250 or 300 μm. We also obtained droplets with monolayer dispersion, three-layer arrangements, double-layer squeezing, and monolayer squeezing when the outlet channel width was 350 μm. The outlet channel width was increased to 400 μm, and four-layer arrangements were observed. We also studied the translation of droplet formation, which resulted in a detailed strategy to control drop size and droplet pattern formation for emulsi cation in microfluidic devices. We expect that our strategy can provide theoretical guidance to synthesize dispersion or polydisperse colloid particles.展开更多
Micro computed tomography (Micro-CT) was applied to obtain three-dimensional images of the microstructure of cement paste (water-to-cement mass ratio of 0.5) at different ages. By using the Amira software, component p...Micro computed tomography (Micro-CT) was applied to obtain three-dimensional images of the microstructure of cement paste (water-to-cement mass ratio of 0.5) at different ages. By using the Amira software, component phases of the cement paste such as pores, hydration products, and unhydrated clinker particles were segmented from each other based on their 3D image grey levels; their relative contents were also calculated with the software, and the data are 61.2%, 0% and 38.8% at the beginning of hydration and 11.8%, 78.5% and 9.7% at 28 d age, respectively. The hydration degree of cement paste at different ages was compared with the experimental data acquired by loss on ignition (LOI) tests. The results show that the calculated and measured data reasonably agree with each other, which indicates that micro-CT is a useful and reliable approach to characterize the micro structure evolution of hydrating cement paste.展开更多
基金This work was supported by the National Natural Science Foundation of China （No.20934004 and No.91127046） and the National Basic Research Program of China （No.2012CB821500 and No.2010CB934500）.
文摘We conducted experiments on specially designed microfluidic chips that generate droplets through a microfluidic ow-focusing approach. The fluid flow in the microfluidic channel produced a shear flow field at low Reynolds numbers. The droplets in the microfluidic system exhibited special droplet pattern formations similar to periodic crystal-like lattices because of the competition between shear forces and surface tension. By adjusting the flow rate ratio of the water （droplet phase） to oil （continuous phase） phases and changing the outlet channel widths, the droplets formed monolayer dispersion to double-layer formation to monolayer squeezing when the outlet channel widths were 250 or 300 μm. We also obtained droplets with monolayer dispersion, three-layer arrangements, double-layer squeezing, and monolayer squeezing when the outlet channel width was 350 μm. The outlet channel width was increased to 400 μm, and four-layer arrangements were observed. We also studied the translation of droplet formation, which resulted in a detailed strategy to control drop size and droplet pattern formation for emulsi cation in microfluidic devices. We expect that our strategy can provide theoretical guidance to synthesize dispersion or polydisperse colloid particles.
基金Project(2009CB623201) supported by the National Basic Research Program of ChinaProjects(50902106, 51272193) supported by the National Natural Science Foundation of ChinaProject(NCET-10-0660) supported by New Century Excellent Talents in Universities of China
文摘Micro computed tomography (Micro-CT) was applied to obtain three-dimensional images of the microstructure of cement paste (water-to-cement mass ratio of 0.5) at different ages. By using the Amira software, component phases of the cement paste such as pores, hydration products, and unhydrated clinker particles were segmented from each other based on their 3D image grey levels; their relative contents were also calculated with the software, and the data are 61.2%, 0% and 38.8% at the beginning of hydration and 11.8%, 78.5% and 9.7% at 28 d age, respectively. The hydration degree of cement paste at different ages was compared with the experimental data acquired by loss on ignition (LOI) tests. The results show that the calculated and measured data reasonably agree with each other, which indicates that micro-CT is a useful and reliable approach to characterize the micro structure evolution of hydrating cement paste.
